Literature DB >> 22815186

Polyurethane thermoplastic elastomers with inherent radiopacity for biomedical applications.

S Kiran1, Nirmala R James, A Jayakrishnan, Roy Joseph.   

Abstract

Synthesis and characterization of three different radiopaque thermoplastic polyurethane elastomers are reported. Radiopacity was introduced to the polyurethanes by incorporating an iodinated chain extender, namely, 4,4'-isopropylidinedi-(2,6-diiodophenol) (IBPA), into the polymer chain during polyurethane synthesis. Radiopaque polyurethanes (RPUs) were synthesized by reacting 4,4'-methylenebis(phenyl isocyanate) (MDI), IBPA, and three different diols. The polyols used for the synthesis were polypropylene glycol, polycaprolactone diol, and poly(hexamethylene carbonate) diol. RPUs were characterized by infrared spectroscopy, contact angle measurements, thermogravimetry, dynamic mechanical analysis, energy dispersive X-ray analysis, gel permeation chromatography, X-ray fluorescence spectroscopy, and X-radiography. X-ray images showed that all RPUs prepared using IBPA as the chain extender are highly radiopaque compared with an Aluminum wedge of equivalent thickness. Elemental analysis revealed that the polyurethanes contained 18-19% iodine in the polymer matrix. The RPUs developed have radiopacity equivalent to that of a polymer filled with 20 wt % barium sulfate. Results revealed that RPUs of wide range of properties may be produced by incorporating different diols as the soft chain segment. Cell culture cytotoxicity studies conducted using L929 cells by direct contact test and MTT assay proved that these RPUs are noncytotoxic in nature.
Copyright © 2012 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22815186     DOI: 10.1002/jbm.a.34295

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  3 in total

1.  Tungsten-loaded SMP foam nanocomposites with inherent radiopacity and tunable thermo-mechanical properties.

Authors:  Sayyeda M Hasan; Garrett Harmon; Fang Zhou; Jeffery E Raymond; Tiffany P Gustafson; Thomas S Wilson; Duncan J Maitland
Journal:  Polym Adv Technol       Date:  2015-08-11       Impact factor: 3.665

2.  Examination of radio-opacity enhancing additives in shape memory polyurethane foams.

Authors:  Andrew C Weems; Jeffery E Raymond; Kevin T Wacker; Tiffany P Gustafson; Brandis Keller; Karen L Wooley; Duncan J Maitland
Journal:  J Appl Polym Sci       Date:  2015-02-24       Impact factor: 3.125

3.  Development and Testing of X-Ray Imaging-Enhanced Poly-L-Lactide Bone Screws.

Authors:  Wei-Jen Chang; Yu-Hwa Pan; Jy-Jiunn Tzeng; Ting-Lin Wu; Tsorng-Harn Fong; Sheng-Wei Feng; Haw-Ming Huang
Journal:  PLoS One       Date:  2015-10-14       Impact factor: 3.240

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.