Literature DB >> 22777077

Effects of a perfusion bioreactor activated novel bone substitute in spine fusion in sheep.

Jesper Roed Sørensen1, Kariatta Ester Koroma, Ming Ding, David Wendt, Stig Jespersen, Maria Vinther Juhl, Naseem Theilgaard, Ivan Martin, Søren Overgaard.   

Abstract

PURPOSE: To evaluate the effect of a large perfusion-bioreactor cell-activated bone substitute, on a two-level large posterolateral spine fusion sheep model.
METHODS: A 50 mm long porous biphasic-calcium-phosphate bone substitute reinforced with poly(D,L-lactide) and, activated with bone marrow derived mononuclear-cells (BMNC) was used. Eighteen sheep were divided into two groups and one group (n = 9) had BMNC-activated bone substitutes and cell-free substitutes implanted. The second group (n = 9) had autograft supplemented with BMNC and regular autograft implanted. The implant material was alternated between spine level L2-L3 and L4-L5 in both groups. MicroCT was used to compare the spine fusion efficacy and bone structure of the two groups as well as the implanted bone substitutes and non-implanted substitutes.
RESULTS: After 4½ months six sheep survived in both groups and we found five spine levels were fused when using activated bone substitute compared to three levels with cell-free bone substitute (p = 0.25). Five sheep fused at both levels in the autograft group. A significant increased bone density (p < 0.05) and anisotropy (p < 0.05) was found in the group of activated bone substitutes compared to cell-free bone substitute and no difference existed on the other parameters. The implanted bone substitutes had a significant higher bone density and trabecular thickness than non-implanted bone substitutes, thus indicating that the PLA reinforced BCP had osteoconductive properties (p < 0.05). No effect of the supplemented BMNC to autograft was observed. The autograft group had a significant higher bone density, trabecular thickness and degree of anisotropy than the implanted bone substitutes (p < 0.05), but a lower connectivity density existed (p < 0.05). This indicates that though the activated substitute might have a similar fusion efficacy to autograft, the fusion bridge is not of equal substance.
CONCLUSION: We found that bioreactor-generated cell-based bone substitutes seemed superior in fusion ability when compared to cell-free bone substitute and comparable to autograft in fusion ability, but not in bone structure. This combined with the favorable biocompatible abilities and strength comparable to human cancellous bone indicates that it might be a suitable bone substitute in spine fusion procedures.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22777077      PMCID: PMC3459119          DOI: 10.1007/s00586-012-2421-x

Source DB:  PubMed          Journal:  Eur Spine J        ISSN: 0940-6719            Impact factor:   3.134


  27 in total

1.  Accuracy of cancellous bone volume fraction measured by micro-CT scanning.

Authors:  M Ding; A Odgaard; I Hvid
Journal:  J Biomech       Date:  1999-03       Impact factor: 2.712

2.  Oscillating perfusion of cell suspensions through three-dimensional scaffolds enhances cell seeding efficiency and uniformity.

Authors:  D Wendt; A Marsano; M Jakob; M Heberer; I Martin
Journal:  Biotechnol Bioeng       Date:  2003-10-20       Impact factor: 4.530

3.  Mutual associations among microstructural, physical and mechanical properties of human cancellous bone.

Authors:  Ming Ding; Anders Odgaard; Carl Christian Danielsen; Ivan Hvid
Journal:  J Bone Joint Surg Br       Date:  2002-08

Review 4.  Complications and concerns with osteobiologics for spine fusion in clinical practice.

Authors:  Steven D Glassman; Jennifer M Howard; Alexander Sweet; Leah Y Carreon
Journal:  Spine (Phila Pa 1976)       Date:  2010-08-01       Impact factor: 3.468

5.  Engineering of osteoinductive grafts by isolation and expansion of ovine bone marrow stromal cells directly on 3D ceramic scaffolds.

Authors:  S Scaglione; A Braccini; D Wendt; C Jaquiery; F Beltrame; R Quarto; Ivan Martin
Journal:  Biotechnol Bioeng       Date:  2006-01-05       Impact factor: 4.530

6.  Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering.

Authors:  Sang-Soo Kim; Min Sun Park; Oju Jeon; Cha Yong Choi; Byung-Soo Kim
Journal:  Biomaterials       Date:  2005-10-05       Impact factor: 12.479

7.  The osteogenicity of implanted engineered bone constructs is related to the density of clonogenic bone marrow stromal cells.

Authors:  Alessandra Braccini; David Wendt; Jian Farhadi; Stefan Schaeren; Michael Heberer; Ivan Martin
Journal:  J Tissue Eng Regen Med       Date:  2007 Jan-Feb       Impact factor: 3.963

8.  Hypoxia in static and dynamic 3D culture systems for tissue engineering of bone.

Authors:  Elias Volkmer; Inga Drosse; Sven Otto; Achim Stangelmayer; Michael Stengele; Bobby Cherian Kallukalam; Wolf Mutschler; Matthias Schieker
Journal:  Tissue Eng Part A       Date:  2008-08       Impact factor: 3.845

9.  Age variations in the properties of human tibial trabecular bone.

Authors:  M Ding; M Dalstra; C C Danielsen; J Kabel; I Hvid; F Linde
Journal:  J Bone Joint Surg Br       Date:  1997-11

10.  Application of perfusion culture system improves in vitro and in vivo osteogenesis of bone marrow-derived osteoblastic cells in porous ceramic materials.

Authors:  Yichao Wang; Toshimasa Uemura; Jian Dong; Hiroko Kojima; Junzo Tanaka; Tetsuya Tateishi
Journal:  Tissue Eng       Date:  2003-12
View more
  2 in total

Review 1.  Recent Advances in Mechanically Loaded Human Mesenchymal Stem Cells for Bone Tissue Engineering.

Authors:  Kar Wey Yong; Jane Ru Choi; Jean Yu Choi; Alistair C Cowie
Journal:  Int J Mol Sci       Date:  2020-08-13       Impact factor: 5.923

2.  Assessment of activated porous granules on implant fixation and early bone formation in sheep.

Authors:  Ming Ding; Susan S Henriksen; Naseem Theilgaard; Søren Overgaard
Journal:  J Orthop Translat       Date:  2015-10-29       Impact factor: 5.191

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.