Vascular endothelial growth factor-delivery systems for cardiac repair: an overview.

Since the discovery of the Vascular Endothelial Growth Factor (VEGF) and its leading role in the angiogenic process, this has been seen as a promising molecule for promoting neovascularization in the infarcted heart. However, even though several clinical trials were initiated, no therapeutic effects were observed, due in part to the short half life of this factor when administered directly to the tissue. In this context, drug delivery systems appear to offer a promising strategy to overcome limitations in clinical trials of VEGF.The aim of this paper is to review the principal drug delivery systems that have been developed to administer VEGF in cardiovascular disease. Studies published in the last 5 years are reviewed and the main features of these systems are explained. The tissue engineering concept is introduced as a therapeutic alternative that holds promise for the near future.

VEGF

Discovery

Vascular Endothelial Growth Factor (VEGF) was first isolated and purified from the medium conditioned by bovine pituitary folliculo-stellate cells by Henzel and Ferrara 1. The newly discovered heparin-binding factor induced proliferation of vascular endothelial cells (ECs), showing no effects on corneal ECs. This apparent target cell selectivity induced the authors to name it “at least provisionally” VEGF 1, 2.

Some months later Ferrara et al 2 published a study in which they demonstrated that VEGF was a secreted protein. Interestingly, they screened cDNA and isolated clones encoding mature monomers of 121, 165 and 189 amino acids. At the same time Keck et al published the purification of the Vascular Permeability Factor 3, identified 5 years before by Senger et al 4. Surprisingly, this protein was identical to VEGF 189.

Since that moment a considerable volume of research has been carried out, and it is now known that the VEGF 121 isoform is the most diffusible 5. Two mechanisms by which this protein is released into a soluble form, namely alternative splicing and proteolytic cleavage, have been described, in vivo pro-angiogenic activity has been tested, several tyrosine kinase VEGF receptors are now known, and an increasing number of molecular studies on VEGF is being published 6.

Biological aspects

Research focusing on the VEGF family has led to the discovery of several members encoded by different genes: VEGF-A or Vascular Permeability Factor (firstly discovered), B, C, D, E, F and PlGF (Platelet Growth Factor)6, 7. The most widely studied member of the family as far as angiogenesis is concerned has been VEGF-A, which we will refer to as VEGF from now on. Different VEGF isoforms from alternative splicing have been described: VEGF121, 145, 165, 189 and 206 (number indicates amino acid residues). VEGF121 is the freely diffusible form, VEGF145 remains bound to cell surface and extracellular matrix (ECM) and VEGF189 and VEGF206 are sequestered in the cell surface and ECM 5, 7. Regarding its different role in neovascularization, briefly, VEGF121 is a mitogenic agent and a chemo-attractant for endothelial cells (ECs) during angiogenesis and vasculogenesis. VEGF165 is a soluble heparin binding protein, and is thus less diffusible than VEGF121, but it exhibits higher mitogenic activity. On the other hand VEGF145 induces EC proliferation and angiogenesis in vivo 5.

From the beginning, researchers realized the clinical relevance of those factors implicated in the angiogenic process. In fact, the role of anti-angiogenic strategies to treat human cancer was proposed by Folkman in 1971, 18 years before VEGF was discovered 8. On the other hand, pro-angiogenic activity also appeared promising as an innovative therapeutic approach in ischemic disorders such as myocardial ischemia. As VEGF is a secreted protein with EC selective activity it was proposed from the first moment as a promising means of regulating angiogenesis.

VEGF in anti-angiogenic therapy

Only 4 years were necessary to develop a successful strategy against human cancer based on VEGF's known involvement in vasculogenesis. The proof of this concept was carried out by Ferrara's group 9. They administered an anti-VEGF monoclonal antibody into nude mice that had been previously injected with different human tumor cell lines. The treatment was successful in inhibiting tumor growth. This effect was associated with a diminished vessel density in the treated tumors. Studies continued and in 1997 the first humanized anti-VEGF monoclonal antibody was developed. Approved in 2004 by the Food and Drug Administration (FDA) for its use in patients with previously untreated metastatic colorectal carcinoma, this antibody, named Bevacizumab 10, is nowadays used in several diseases, namely breast cancer and macular degeneration, among others.

Another strategy that has been explored is the use of small molecule VEGF receptor tyrosine kinase inhibitors. In 2005 Sorafenib received the FDA approval for its use in patients with advanced renal cell carcinoma 11. In 2007 approval was extended for the treatment of patients with unresectable hepatocellular carcinoma. In the meantime, in 2006 another molecule with the same mechanism (Sunitinib malate) was approved for the treatment of advanced (metastatic) renal cell carcinoma and for the treatment of gastrointestinal stromal tumor after disease progression, or intolerance to the treatment of choice 12.

VEGF in pro-angiogenic therapy

To study the role of VEGF in the formation of new vasculature it is important to identify different processes in vessel formation 13. Vasculogenesis takes place during mammalian embryo development. It consists of the formation of de novo vessels by differentiation of angioblasts into ECs. Sprouting during angiogenesis is the subsequent process, which ensures the expansion of the vessel network. Arteriogenesis involves the covering of EC channels by pericytes or vascular smooth muscle cells. Besides these steps, other mechanisms can occur, such as intussusception of pre-existing vessels or recruitment of bone marrow derived cells and endothelial progenitor cells that are incorporated into the endothelial lining in a process known as postnatal vasculogenesis 14. In all these processes, VEGF is present and plays a critical role 15.

In the adult organism, quiescent vessels are constituted by quiescent ECs and pericytes. These suppress EC proliferation and release cell survival signals like VEGF. When a hypoxic stimulus activates quiescent vessels, pericytes are detached from the vessel wall. Matrix metalloproteinases (MMPs) start proteolytic degradation and pericytes are released from the basement membrane; ECs lose their junctions, allowing vessels to dilate. VEGF acts at this point by increasing the permeability of the EC layer, and plasma protein flows out establishing an ECM scaffold. Following integrin signaling, ECs migrate onto this ECM surface. Angiogenic mediators of the ECM such as VEGF and fibroblast growth factor (FGF) are released by proteinases. These factors are implicated in the constitution of the ECM as an appropriate angiogenic environment. After these steps, a cell is selected to lead vessel enlargement. VEGF gradient, regulated by soluble and matrix bound isoforms, makes tip cells upregulate delta-like ligand 4 (DLL4) expression, activating NOTCH in stalk cells, then downregulating VEGF receptors. As a consequence, stalk cells are less responsive to VEGF, helping the tip cells to take the lead. Tip cells respond to stimuli and move towards the angiogenic signal. Stalk cells, on the other hand, elongate the stalk by division and establish the vessel lumen 14.

The complexity of this vasculogenic process has not always been as clear as it is now, but the importance of VEGF in the neovascularization process has been evident since it was first discovered. In the last two decades, research to find a VEGF-based therapy to treat tissues damaged due to hypoxia has concluded in various clinical trials. In the next section, an overview of the clinical trials performed in the context of cardiovascular repair will be discussed.

Clinical trials with VEGF: results and conclusions

The results of small phase I trials using intracoronary and intravenous infusions of VEGF in patients with coronary artery disease were encouraging 16-18. For example, Hendel et al.17 conducted a study with 14 patients who underwent exercise and myocardial perfusion measurements before as well as 30 and 60 days after VEGF administration. Although it was not designed to demonstrate VEGF efficacy, the study showed a significant improvement in exercise capacity without any safety issues. Also, the resting nuclear myocardial perfusion scans indicated a VEGF treatment effect. In another small study, a dose escalation trial was designed to determine the safety and tolerability of intracoronary VEGF infusions in 15 patients with underperfused myocardium. As a result, myocardial perfusion imaging was improved in 7 out of 14 patients at 60 days and all 7 patients with follow-up angiograms had improvements in the collateral density score. This study also established that VEGF can safely and tolerably be administered to humans by intracoronary infusion for up to 20 minutes at 0.050 µg/kg/min 19. In a study employing intravenous administration of VEGF in 28 patients, the authors reported evidence of improvement in rest myocardial perfusion and in collateral density 16. In spite of the promising results of these small phase I trials, a randomized, double-blind, placebo-controlled phase II trial failed to show differences between the VEGF and placebo groups. The VIVA (Vascular endothelial growth factor in Ischemia for Vascular Angiogenesis) study compared two doses of VEGF to placebo in 178 patients with coronary artery disease. A single intracoronary infusion followed by three separate intravenous infusions was given. Despite the safety and tolerability, the administration regimes revealed that VEGF offered no improvement beyond placebo by day 60, although high-dose VEGF resulted in better improvement in angina and favorable trends in exercise treadmill test time and angina frequency, by day 120 20.

The results of myocardial clinical trials using VEGF delivery have generally been disappointing and the studies have failed to consistently demonstrate improvements in treated patients as compared with placebo. Many of these trials relied on an intravenous infusion or intracoronary delivery of the recombinant protein. It is noteworthy that VEGF is not effective when delivered intravenously 21. Therefore, these negative results have been attributed, at least partially, to the short-lived effect and high instability of the protein when injected as a bolus. Intravenous administration of VEGF is limited by its short in vivo half life (~30 min) and overall dose is limited by off-target site toxicity issues 18. In the case of myocardial ischemia, the amount of VEGF localized in the ischemic region after systemic administration is minimal and does not persist for more than 1 day 22. Based on these issues, some unusual characteristics of the VIVA trial make interpretation of therapeutic efficacy of VEGF somewhat difficult; in particular, suboptimal dose or route of administration and uncontrolled delivery method of VEGF. Perhaps the most striking contribution of the VIVA trial was to consider that more preclinical data were needed with regard to the time course of angiogenesis and the optimal dose and route of administration to induce effective VEGF therapy in the myocardium. Also, given that the low recovery in the myocardium of the administered VEGF might be another important cause of the missing clinical effect, local and sustained VEGF delivery by controlled release approaches in the heart tissue might be a better strategy to achieve higher efficacy in VEGF-based therapy for myocardial ischemia. Table 1 summarizes the main clinical trials using VEGF recombinant protein for cardiac repair.

Table 1

Clinical trials using VEGF recombinant proteins for cardiac repair.

Route	Trial	n	Outcomes	Reference
Intracoronary	Phase I	14	Some improvement in perfusion in patients treated with low-dose VEGF; five of six patients had perfusion improvement at rest and stress at higher doses	17
Intracoronary	Phase I	15	Dose screening study; well tolerated up to 0.05 mg/kg/min; myocardial perfusion imaging was improved in 7 out of 14 patients at 60 days	18
Intravenous	Phase I	28	An increase in exercise capacity was reported without any safety issues	16
Intracoronary/intravenous	Phase II	178	VIVA study; safe and well tolerated; no improvement beyond placebo in all measurements by day 60. By day 120, high-dose VEGF resulted in significant improvement in angina; no improvements in myocardial perfusion	20

DELIVERY SYSTEMS

Protein delivery systems

When administering drugs to an organism, the goal is to reach the appropriate dose at the site of action for the necessary period of time, so that the drug acts in its optimal condition, with the minimum adverse effects. Drug delivery systems (DDS) are designed taking into account the specificities of the drug to be administered, the organism in which it is administered and the disease being treated. Depending on these conditions, release profiles are designed and materials and device architecture are chosen. Even though the concept of drug delivery is relatively old, its application to biomolecules, such as proteins, hormones, antibodies or genes, has been explored only in the last 15-20 years.

As scientists make progress in their understanding of the mechanisms of disease, there is increasing awareness that protein delivery is a very attractive approach in many diseases. In our context, as clinical trials have highlighted, promoting angiogenesis via growth factors (GFs) or cytokines demands the use of a DDS that preserves their properties and prolongs their short half life 23. Proteins are labile systems with primary, secondary, tertiary and quaternary structures. Primary structure relates to the amino acid sequence, whereas higher structures refer to protein fold. Chemical instability is due to modification at the first level, such as deamidation, oxidation, beta elimination, incorrect disulfide formation or racemization. Physical instability refers to secondary, tertiary and quaternary structure, with phenomena like denaturation, aggregation, precipitation and surface adsorption. All these instability issues result in the short half life of VEGF when administered directly in the tissue. Incorporating VEGF in an adequate carrier serves to protect it until it is released from the device. However, incorporating VEGF, and any protein, in an adequate carrier poses unique difficulties due to physical and chemical instability. Temperature, pH, pressure, the presence of metal ions and denaturing agents like surfactants need to be tightly controlled during the manufacturing process to avoid chemical instability.

The first marketed protein included in a DDS was the luteinizing hormone releasing hormone (LHRH), which was commercialized by Astra Zeneca as Zoladex, with FDA approval in 1989 for the treatment of prostate cancer. It was a 1.5 mm sized subcutaneous implant prepared with the copolymer polylactide-co-glycolide (PLGA). Nowadays other protein formulations have come on the market: long release octreotide (Octreotide® LAR®, Novartis Pharmaceuticals), human growth hormone (Nutropin depot®, Genentech), adenosin deaminase (Adagen®, Enzon), L-asparaginase (Oncaspar®, Enzon), Interferon-α2 (Pegasys®, Roche) as examples.

VEGF delivery systems in cardiac repair

To achieve sustained presence of VEGF in the damaged tissue, both gene therapy and DDS have been designed. However, the aim of this review is focused on the second option. Updated information about gene therapy in this field can be found in the bibliography 24-27.

Studies published in the last five years related to VEGF delivery systems and cardiovascular diseases have been reviewed. Those corresponding to the last two years are summarized in Table 2. During this period of time, two systems have been the most widely employed: scaffolds and particulated constructs, represented in Figure 1.

Table 2

Summary of VEGF delivery and cardiac repair in the last 2 years.

DDS		COMPOSITION	ANGIOGENIC FACTOR/S	PREPARATION METHOD	ANGIOGNENIC EFFICACY ASSAY	AUTHOR'S CONCLUSION	REF.
SCAFFOLD	surface crosslinked Heparin	polycaprolactone	VEGF	Solvent casting and particulate leaching method	Subcutaneous implant model in mice	Modification of the scaffold with heparin improves VEGF efficacy	37
	hollow-fiber membrane	cellulose acetate	VEGF & S1P	Double injection extrusion/ precipitation method	Subcutaneous implant model in mice	System capable of exploring sequential delivery of angiogenic factors. Sequential delivery of VEGF followed by S1P resulted in recruitment of more ECs and higher maturation index	43
	biomimetic hydrogel (adhesion peptide sequence RGDS)	PEG diacrylate	VEGF	Photopolymerization	In vitro (HUVECs and hMECs)	The system promotes EC proliferation, migration and viability maintenance	44
	patch with covalently immobilized VEGF	collagen	VEGF	Commercial scaffold	Right ventricular free wall resection and replacement with the scaffold	Collagen scaffold with covalently immobilized VEGF improved tissue formation	32
	hydrogel with surface crosslinked Heparin	star-PEG	VEGF & FGF-2	Cross linking	In vitro (HUVECs) and Chicken chorioallantoin membrane angiogénesis assay	Angiogenic activity superior to the administration of single factors	45, 46
	hydrogel	alginate	VEGF	Cross linking	Hindlimb ischemia in mice		47
	covalently immobilized factors	collagen	VEGF & Ang-1	Commercial scaffold	Chicken chorioallantoin membraneangiogenesis assay	Scaffolds with co-immobilized VEGF and Ang-1 further improved angiogenesis as compared to independently immobilized VEGF or Ang-1	31
	composite scaffold	Poly(ether)urethane-polydimethylsiloxane-fibrin	VEGF & bFGF	Spray-phase inversion method	Subcutaneous implant and unilateral hind limb ischemia model in rat	Incorporation of VEGF, bFGF and heparin in the composite scaffold enhances angiogenesis	38
	temperature sensitive injectable hydrogel	PVL-b-PEG-b-PVL	VEGF	Metal-free cationic method	Myocardial infarction rat model (coronary artery ligation)	The system preserved ventricular function by stabilizing the infarct and reducing angiogenesis	41
	fibrous membranes	Dextran/PLGA	VEGF	Coaxial electrospinning	In vitro	The system positively promotes cell proliferation	48
	dual layered scaffold combined with an osmotic release mechanism	Poly(trimethylene carbonate)	VEGF & HGF	Cross linking	In vitro (HAECs)	System able to release combined GFs at similar rates, and at controllable sequences	49
PARTICLES	NPs	Hyaluronic acid/chitosan	VEGF & PDGF-BB	Ionic gelification technique	-	NPs entrap efficiently both factors. PDGF-BB is released in a sustained manner over 1 week and VEGF within the first 24 hours.	50
		PLGA/heparin/fibrin	VEGF	Spontaneous emulsion solvent diffusion method	Rabbit ischemic hind limb	The system strongly increases the in vivo therapeutic angiogenic effects of VEGF	51
		PLGA	VEGF	Modification of the double emulsion method	Hindlimb ischemia in mice	Feasibility of the system to produce a more viogorous revascularization when compared with free VEGF administration	52
	MPs	PLGA	VEGF	Double emulsion/solvent evaporation method	In vitro (HUVECs)	The system allows VEGF encapsulation and bioactive protein release up to 21 days	53
		PLGA	VEGF	Double emulsion/solvent evaporation method	Myocardial infarction rat model (coronary artery ligation)		54
		Collagen	VEGF	Cross linking	In vitro (HUVECs)	The system allows VEGF encapsulation and bioactive protein release up to 4 weeks	55
PARTICLES- SCAFFOLD	MPs MPs-Scaffold	PLGA (MPs) PLGA-N-methyl pyrrolidone (scaffold)	VEGF	MPs: spray dryScaffold: gelification	Murine model of peripheral angiogenesis	Both formulations provide a method to incite neovascularization from a single injection	56
	NPsScaffolds (hydrogel or polymeric)NPs-Scaffold (hydrogel or polymeric)	NPs: Dextran-sulfate/chitosanScaffold: Matrigel® or PLGA	VEGF	NPs: complex formation and coacervationScaffold: gas foaming/particulate leaching method(Matrigel®: commercially obtained)	Subcutaneous injection (NPs-Matrigel®)NPs-PLGA scaffolds implanted into the intraperioneal fat pad of mice	Angiogenesis was clearly improved by VEGF encapsulation and further incorporation into implants, compared to direct VEGF incorporation into implants	57
	MPs-Scaffold co-administered with ECs	Alginate MPscollagen/fibronectin gel	VEGF & MCP-1	Cross linking	Subcutaneous implant model in mice	Delivery of multiple therapeutic proteins to enhance the efficacy of cell-based vascularization	58
OTHER	Polymeric injectable carrier	Poly(trimethylene carbonate)	VEGF	-	Subcutaneous injection in rat	The approach has potential for providing effective, local, bioactive growth factor delivery.	59
	Collagen patches	Collagen	VEGF	Collagen binding domain is fused to VEGF	Myocardial implantation	Patches improve left ventricular cardiac function and increase the vascular density	60

Figure 1

The main DDSs employed in recent years in the field of VEGF and cardiac repair are represented. In the particles (nano or microsized) VEGF can be included homogenously through the entire particle (A) or only in the core of the system (B), which affects the release profile. A wide variety of scaffolds has been designed. In a thermosensitive injectable hydrogel (C) at temperatures under 37 ºC the blend of the vehicle and the VEGF remains liquid, but when it is injected and reaches the body temperature the mixture solidifies and VEGF is entrapped within the gel matrix (D). By electrospinning fibrous scaffolds are built up (E) whereas porous scaffolds (F) can be formed by solvent casting and particulate leaching method.

Scaffolds

Most authors propose the use of scaffolds as delivery platforms. In general, the requirements that scaffolds must fulfill are several 28: adequate 3D architecture with the desired shape, volume and mechanical strength; highly porous structure to allow tissue growth and diffusion of biomolecules; biocompability; appropriate degradation rate; and good interface adherence so that proteins attach in a desired way to the material. Particularly, basic physical requirements for myocardial engineered constructs are robust yet flexible mechanical properties, contractile ability, and electrophysiological stability 28, 29. The physical and biochemical effects of scaffolds in cardiovascular differentiation have been reviewed elsewhere 30. Moreover, a scaffold designed for protein delivery needs to show high loading capacity, homogenous protein distribution, a protein binding affinity that allows adequate protein release and, importantly, ability to maintain protein stability and bioactivity.

These devices can be constructed with natural or synthetic biomaterials. In the past the use of non-degradable constructs involved a second intervention to extract these. Nowadays the use of biodegradable devices is almost presupposed. Components found in the ECM are preferably from within the range of natural materials: collagen, fibrinogen, hyaluronic acid (HA), chitosan, alginate, etc. The use of these natural scaffolds has increased during recent years and companies have already put them on the market. In the last two years, Radisic et al have published two papers in which they immobilize VEGF in a commercial ultrafoam 31, 32, demonstrating that the system has suitable mechanical properties for potential use in repairing heart defects and that it improves angiogenesis both in vitro 31 and in vivo, in a rat heart injury model 32. Because of their natural origin, most of these components are biocompatible, bioactive and tend to show similar mechanical properties to the native tissue. However, synthetic materials have been developed with optimal qualities for tissue regeneration. Elastomeric scaffolds such as poly (glycolic acid) (PGA) and poly (lactid acid) (PLA), as well as their copolymer PLGA, have been successfully applied 33-35. Like natural materials, polyesters are biocompatible and biodegradable, and by controlling polymerization it is possible to modulate their mechanical properties. In fact, PLGA has already received FDA approval for its use in drug delivery 36 Also polyanhydrides and other polyesters, such as polycaprolactone (PCL) 37, have been shown to be possible alternatives as VEGF carriers. In recent years, different materials have been combined to modulate the mechanical and biological properties of the scaffold. To give an example, fibrin-based biomaterials have been found to stimulate and support the growth of new blood vessels, but their poor mechanical properties have encouraged researchers to combine them with synthetic materials. Losi et al 38 have obtained composite scaffolds made of a synthetic layer of poly(ether)urethane-polydimethylsiloxane, contributing to mechanical resistance, and a fibrin layer that acts as a GF delivery carrier.

Numerous preparation methods have been reported for manufacturing 3D porous scaffolds, namely fiber bonding, emulsion freeze drying, solvent casting/particulate leaching 37, high pressure processing, gas foaming/particulate leaching, thermally induced phase separation, electrospinning 39 and rapid prototyping (reviewed in 40). Recently, injectable biomaterials that form scaffold in situ have been used. These can be administered parenterally, but also locally, with the advantage that the scaffold acquires the shape of the tissue defect and surgery is avoided. Recently, Wu et al 41, prepared a VEGF-conjugated injectable hydrogel that was intramyocardially injected into Sprague Dawley rat infarcted hearts, preserving ventricular function after myocardial ischemia by stabilizing the infarct and inducing angiogenesis. The gel was composed of a temperature sensitive aliphatic polyester (poly (δ-valerolactone)-block-ply (ethylene glycol)-block-poly (δ-valerolactone)). This polymer is called thermosensitive since it dissolves in water at room temperature, but gels at 37 ºC (see Fig. 1C). This property makes this kind of material especially interesting.

The route of administration to reach the infarcted heart still remains challenging (see Figure 2) 42. When implanting a scaffold in the heart, surgery is necessary, with the consequent inconvenience and risks for the patient. The scaffold in that case needs to be placed covering the infarcted zone, or surrounding it, so that GFs are released towards the cells acting in the repair process and are responsive to VEGF (Fig. 1A). If an injectable gel is used, surgery may be avoided, since it can be directly injected into the heart without surgical intervention (Fig. 1C).

Figure 2

Depending on the VEGF carrier different routes of administration can be chosen. Solid scaffolds need to be attached to the heart, frequently covering the infarcted area (A). Particles can be injected in the desired zone intracoronarily using a catheter (B) or by direct injection (C). Injectable scaffolds can also be implanted using this route.

To optimize scaffold effectiveness, it can be surface modified. Collagen and gelatin are known to modulate adhesive properties. The attachment of a cell adhesive peptide on the surface improves ligand-receptor interaction, as well as cell adhesion. In a recent article, Porter et al 44 propose the preparation of a biomimetic hydrogel by including an adhesion peptide sequence derived from fibronectin (RGDS), in a VEGF covalently incorporated PEG hydrogel, to enhance cell adhesion. However, in this study only in vitro assays were performed. Hyaluronic acid (HA) is a substance present in the ECM that interacts with CD4 receptor, promoting wound healing, making its use attractive. Heparin modification has also been extensively studied for the release of GFs. Heparin is a highly sulfated glycosaminoglycan in the ECM, and is known for its specific interactions with various angiogenic GFs 61, 62. A wide variety of scaffolds including nanofibers, prepared from collagen, fibrin, chitosan, alginate, PLA and PLGA, have been immobilized with heparin to achieve sustained release of GFs 40, 63. Based on this, Zieris et al 37, 45 prepared a biohybrid hydrogel with star-shaped PEG and carbodiimide/N-hydroxysulfosuccinimiede-activated heparin, obtaining appropriate VEGF binding and release, with good in vitro results (included in Table 2). On the other hand, Singh et al 37 demonstrated an enhanced VEGF angiogenic effect, in a subcutaneous implant model, when a PCL scaffold was surface modified with heparin.

Nano/Microparticles

Among the particulated delivery systems MPs (>1 µm and < 1,000 µm sized) and NPs (< 1 µm sized) have been used for VEGF delivery. Microsized particles are not readily internalized by the cells, but they have the potential to provide sustained release kinetics after implantation. In addition, MP diffusion from the implantation site is infrequent, which avoids undesired effects in other tissues. Thus, MPs provide control over the release rate and dose, yielding desirable concentrations for a period of time 64. On the other hand, NPs can penetrate through capillaries into the cell machinery. Therefore, the pro-angiogenic potential of GFs in NPs or MPs in the tissue is not necessary equivalent. In relation to drug distribution within the particle, we can distinguish between nano/microcapsules and nano/microspheres (see Fig. 1A and 1B). A clear advantage of these DDS, when compared with scaffolds, is the route of administration. As it has been mentioned before, most of the scaffolds need to be implanted through a surgical intervention. In the case of the particles, they can be injected directly into the myocardium without surgery. Frequently, several injections are performed around the infarcted area, in the confluence of the healthy and the damaged tissue (see Fig. 2C). Another non-invasive route for these DDS is the intracoronary route via a catheter (see Fig. 2B).

To prepare these DDSs, numerous strategies have been employed, among others, solvent extraction/evaporation, spray drying and phase separation method 65. Spray drying is associated with low process efficacy and protein denaturing due to dehydration 66. The phase separation method is mediated by a solvent and coacervating agent that can react with the protein and disrupt the secondary structure. Moreover, this is a process that is not well suited to producing particles in the low micrometer size range 67. The solvent extraction/evaporation method is thus thought to be, to date, the most appropriate. Two different modifications of this procedure are the single emulsion and the double emulsion solvent evaporation method. In the first one, since proteins are hydrophobic molecules, low encapsulation efficiency (EE) values are obtained. EE is an important feature and can be defined as the capability of immobilizing most of the protein added during the process. In the single emulsion case, protein is incorporated in the external phase of the emulsion (o/w), whereas in the double emulsion the protein is localized in the internal aqueous phase (w/o/w), diminishing the loss of the molecule. Nevertheless, this method presents some drawbacks, such as the need to reach high temperatures or to employ mechanical forces that can damage the protein. Systems to avoid elevated temperatures and stirring during the emulsion preparation have now been designed. An example is the Total Recirculation One Machine System® (TROMS) 68. In the TROMS, the inner aqueous phase of the emulsion is injected into the organic phase. This blend is forced to circulate through a closed circuit with a specified inner diameter for a period of time. Once the first emulsion is formed, it is injected into the external aqueous phase leading, after a period of time in circulation, to the constitution of the double emulsion without inflicting too much stress on the protein so that bioactivity is preserved. Employing TROMS we have been able to encapsulate VEGF and other proteins in PLGA microparticles with EE values over 80% while maintaining protein bioactivity during the formulation process 54, 69. On the other hand, the formation of aqueous/organic solvent interfaces is the main disadvantage of this method. Also, when using PLGA copolymer, hydrophobic interactions between the protein and PLGA are responsible for protein aggregation and denaturing. To minimize these effects, addition of human serum albumin (HSA) or surfactants such as poly ethylene glycol (PEG), helps to protect the protein by preventing hydrophobic contacts 70. Another important factor to take into account is pH modification. When PLGA degrades, pH decreases due to the presence of glycolic and lactic acid 71, and this is associated with a loss of bioactivity as a consequence of protein aggregation and chemical degradation. It may also be possible that PLGA degradation products and proteins react, leading, for example, to protein acetylation 71. Therefore approaches to reduce acid-induced damage have been discussed, such as incorporating Mg(OH)2 in the formulation 72.

PLGA particles with VEGF have been studied extensively for ischemia tissue repair 52-54 and they appear to be a promising strategy. Guldberg et al 52 demonstrated a vigorous revascularization response when treating a hindlimb ischemia model in mice with VEGF-NPs, which was greater than the response obtained after 5 μg VEGF, 2.5 μg VEGF, and saline treatment. VEGF-MPs were also prepared by Baysal et al 53 to face therapeutic angiogenesis. In this study, MPs succeeded in promoting HUVEC proliferation and migration. Our group developed VEGF loaded PLGA MPs which, when intramyocardially injected in an infarcted heart rat model, improved vasculogenesis and tissue remodeling 54.

Particles included in scaffolds

More sophisticated systems can be prepared by incorporating protein loaded particles into scaffolds. These kinds of system present some features that can be of interest in some situations. Firstly, the release profile is modified (Fig. 3). In short, the burst effect is maintained while the sustained release of the protein is prolonged 64. However, possibilities are unlimited, since the GF can be included both in the particles and in the scaffold, or just inside the particles. Also, GFs can be covalently immobilized in the carriers or non-covalently, leading to different delivery. Moreover, the scaffold architecture can modulate different release profiles, depending on whether it is a multilayered system or a core-shell system. All these alternatives, and others, have been recently reviewed by Chen et al 64.

Figure 3

Simplification of how VEGF release profile can be modified when included in particles or in particles embedded in scaffolds.

An elegant construct has been described by Chung et al 51. They compare the angiogenesis potential of VEGF when included in a fibrin gel or when included in a heparin-functionalized nanoparticle incorporated in the same fibrin gel. In the first case, almost 100% of VEGF was released within the first 3 days, whereas sustained release of the protein was observed for more than 30 days in the second approach, resulting in an enhanced angiogenic effect. Recently, des Rieux et al 57 investigated whether angiogenesis is enhanced when administering VEGF that is freely incorporated in two types of matrices (Matrigel® or PLGA) or when VEGF is previously encapsulated in dextran-chitosan nanoparticles. The results lead these authors to conclude that a more interesting approach could be to fill the PLGA scaffold pores with the hydrogel, both systems being loaded with VEGF nanoparticles, and thus combine three carrier systems.

Combination of VEGF with other biomolecules

When trying to regenerate heart tissue, the combination of several factors (pro-angiogenic, cardioprotective and chemoattracting) could be a good strategy 73. As described above, a hypoxic stimulus in the heart activates not only VEGF and neo-vascularization, but complex and tightly spatio-temporally coordinated pathways, involving different cells and inter-regulated factors. DDSs appear in this context not only as the way to prolong the short half life of all these biomolecules, but also as a suitable platform to mimic the optimum environment for the tissue to regenerate, by delivering various GFs in a different but controlled manner. Work in this field has increased in recent years. VEGF has been incorporated into carriers together with other factors; the next step is to prepare systems that allow a dual or sequential delivery of factors with a tight dose control 46. Recently Chapanian and Amsden 49 have been able to create a system for the combined and sequential delivery of VEGF and hepatocyte growth factor. The construct is composed of trimethylene carbonate based elastomers and is combined with an osmotic mechanism to release acid-sensitive GFs, preserving its bioavility. Another approach is the combination of VEGF with Angiopoietin-1, another GF implicated in vascular stabilization and remodeling 31. These were covalently immobilized in collagen scaffolds and a chicken chorioallantoic membrane angiogenesis assay was performed to test the system. The results led these authors to conclude that scaffolds with co-immobilized VEGF and Ang1 further improved angiogenesis, as compared to independently immobilized VEGF or Ang1. Also, covalent immobilization of growth factors on the scaffolds yielded better results compared to simple addition of soluble growth factors to scaffolds (Table 2). Other factors combined with VEGF have been FGF-2 in PEG based hydrogels 45, 46, PDGF-BB in alginate hydrogels 74 and in HA/chitosan NPs 50, bFGF in a composite scaffold 38 and sphingosine 1-phosphate 43. The work of Hao et al 74 is particularly worth mentioning. While the majority of the studies have just proved the ability of the system to incorporate GFs and to deliver them, in this case the system was applied to a myocardial infarction rat model, with the formation of more mature vessels and improvement of cardiac function when compared to delivery of single factors 17, 74. Despite these results, it is still necessary to answer the question as to which the appropriate VEGF co-factor/s are and what the ideal release profile for each one is.

Application of Drug delivery systems in the ischemic heart

To sum up, it is possible to conclude that each delivery system has its own advantages and limitations. As mentioned before, the administration route is a key point to take into account. Several methods of delivery are used (Figure 2.) depending on the pathology of the patient. In the case of chronic myocardial ischemia, direct intramyocardial injection is preferred, since it allows delivery in the ischemic tissue with an occluded artery 75. Direct intramyocardial injection can be trans-epicardial, trans-endocardial, and less frequently, trans-venous. The first is usually performed during open heart surgery, and due to the high risk, is not performed as a standalone procedure. Another context is an acute myocardial infarction, in which intracoronary injection is the most frequent method 76.

On balance, solid scaffolds present the disadvantage of needing to be implanted in the heart, making surgery mandatory. Solid scaffolds would therefore not be an adequate DDS to treat acute myocardial ischemia, or for chronic myocardial ischemia when the patient requires open heart surgery.

The administration route is not the only feature to be taken into account when choosing a DDS. For instance, scaffolds have the drawback of the administration route but they show the benefit of covering the total area of the infarct. In consequence, if they are built with materials able to reproduce the extracellular matrix, they can help the heart to overcome the consequences of the negative remodeling 77. Furthermore, if the aim is to administer more than one factor with different release profiles, the scaffold elaboration process becomes more complicated, as it is necessary to include in it, for instance, particles that modify the release rate of one or more of the active molecules.

On the other hand, use of particles makes all the administration routes possible. It is also easier to combine different particles containing several factors, theoretically providing a more orchestrated signaling environment to the damage tissue.

In relation to the possibility of preparing an engineered construct including factors, DDS and cells, both scaffold and MPs are potentially useful, whereas the reduced area of NPs does not provide enough space to attach cells to their surface. Sustained release of the factors is also difficult to achieve when administering NPs, not to mention their greater likelihood of being removed from the tissue by phagocytic uptake.

Most of the published studies using VEGF loaded in DDSs carried out limited in vivo studies, and just a few of them have applied VEGF-DDS in the ischemic heart. Thus, it is still too soon to conclude which DDS is the most suitable to apply in cardiac repair.

Therefore, as all DDS present advantages and disadvantages, combining them to prepare more sophisticated constructs could make it possible to exploit the benefits of each one in order to give the optimal signals to the cardiac tissue that needs to regenerate.

FUTURE DIRECTIONS: THE TISSUE ENGINEERING TRIAD

As the same time as the number of papers in which GFs and DDSs are combined has increased, numerous researchers have focused on cell therapy to treat cardiac injury42. Just as DDSs appear in the first case as a suitable approach for prolonging the permanence of GFs in the tissue, the cell engraftment approach may well be extended by including cells in scaffolds. So far, these scaffolds have progressed to mimic the cell's natural environment as far as possible, aiding in its survival and development. In this sense, the incorporation of factors in the scaffold helps not only to modulate cell life, but also acts in the tissue and improves its recovery. The combination of engineered platforms, cells and GFs has been named the tissue engineering triad, and seems to be a promising tool in the field of cardiac repair. A considerable research effort is now needed to establish the “winning combination”.