Literature DB >> 22684585

Elution of monomers from three different bonding systems and their antibacterial effect.

Olga Polydorou1, Philipp Rogatti, Richard Bolek, Martin Wolkewitz, Klaus Kümmerer, Elmar Hellwig.   

Abstract

The aim of the present study was to evaluate the release of monomers from three bonding systems and to correlate it with their antibacterial effect. Three bonding systems (Optibond FL(®), Xeno III(®) and Clearfil™ Protect Bond) were tested after storage in ethanol 75 % and human saliva. Twenty samples (n = 10/medium) of each bonding material were prepared and polymerized according to the manufacturers' instructions. Each sample was stored in 1 ml of the respective storage medium. The medium was renewed after 24 h, 7 days, and 28 days and was analysed by LC-MS/MS for the release of substances. Additionally, the antibacterial effect of the unpolymerized components of each bonding system and their polymerized mixture was tested using agar disc-diffusion test with Streptococcus mutans. Only HEMA was found to be released. The amount of HEMA detected in the ethanol samples was significantly higher compared to the saliva samples (p < 0.0001). The release of HEMA was as follows: Clearfil™ Protect Bond < Optibond FL(®) < Xeno III(®.) According to the agar disc-diffusion test, all materials exhibited certain antibacterial activity. The release of HEMA from all tested materials even after storing in human saliva increases the concerns about their toxicity. Their antibacterial effect seems not be due to the release of substances.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22684585     DOI: 10.1007/s10266-012-0071-4

Source DB:  PubMed          Journal:  Odontology        ISSN: 1618-1247            Impact factor:   2.634


  39 in total

1.  Release of monomers from four different composite materials after halogen and LED curing.

Authors:  Olga Polydorou; Armin König; Markus Jörg Altenburger; Martin Wolkewitz; Elmar Hellwig; Klaus Kümmerer
Journal:  Am J Dent       Date:  2011-10       Impact factor: 1.522

Review 2.  Antibacterial properties of resin composites and dentin bonding systems.

Authors:  Satoshi Imazato
Journal:  Dent Mater       Date:  2003-09       Impact factor: 5.304

3.  Sorption kinetics of ethanol/water solution by dimethacrylate-based dental resins and resin composites.

Authors:  Irini D Sideridou; Dimitris S Achilias; Maria M Karabela
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2007-04       Impact factor: 3.368

4.  Antibacterial activity of dentine primer containing MDPB after curing.

Authors:  S Imazato; A Ehara; M Torii; S Ebisu
Journal:  J Dent       Date:  1998-03       Impact factor: 4.379

Review 5.  Bioavailability of components of resin-based materials which are applied to teeth.

Authors:  W R Hume; T M Gerzina
Journal:  Crit Rev Oral Biol Med       Date:  1996

6.  In vitro embryotoxicity assessment with dental restorative materials.

Authors:  S Schwengberg; H Bohlen; N Kleinsasser; K Kehe; M Seiss; U I Walther; R Hickel; F X Reichl
Journal:  J Dent       Date:  2005-01       Impact factor: 4.379

7.  In vitro antibacterial effects of the dentin primer of Clearfil Protect Bond.

Authors:  Satoshi Imazato; Akiko Kuramoto; Yusuke Takahashi; Shigeyuki Ebisu; Mathilde C Peters
Journal:  Dent Mater       Date:  2005-09-29       Impact factor: 5.304

8.  Dentin diffusion of HEMA released from etch-and-rinse and self-etch bonding systems.

Authors:  Andreas Rathke; Andreas Alt; Nadin Gambin; Bernd Haller
Journal:  Eur J Oral Sci       Date:  2007-12       Impact factor: 2.612

9.  HPLC analysis of HEMA released from two different adhesive systems.

Authors:  Subutay Han Altintas; Aslihan Usumez
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-11       Impact factor: 3.368

10.  Occupational allergic contact dermatitis from 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate in a modified acrylic structural adhesive.

Authors:  L Kanerva; R Jolanki; T Leino; T Estlander
Journal:  Contact Dermatitis       Date:  1995-08       Impact factor: 6.600

View more
  3 in total

1.  Effect of Laser-assisted and Conventional In-office Bleaching on Monomer Release from Microhybrid and Nanohybrid Composite.

Authors:  Ladan Ranjbar Omrani; Shayan Farjadfar; Parham Pedram; Sima Sadray; Sedighe Sadat Hashemi Kamangar; Nasim Chiniforoush
Journal:  Laser Ther       Date:  2017-06-30

2.  Flow Cytometry Analysis of Antibacterial Effects of Universal Dentin Bonding Agents on Streptococcus mutans.

Authors:  Barbara Lapinska; Magdalena Konieczka; Beata Zarzycka; Krzysztof Sokolowski; Janina Grzegorczyk; Monika Lukomska-Szymanska
Journal:  Molecules       Date:  2019-02-01       Impact factor: 4.411

Review 3.  Meta-analytical analysis on components released from resin-based dental materials.

Authors:  Francesco De Angelis; Nela Sarteur; Michal Šteffl; Camillo D'Arcangelo; Matteo Buonvivere; Mirco Vadini
Journal:  Clin Oral Investig       Date:  2022-07-23       Impact factor: 3.606

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.