Literature DB >> 22684402

Summary workshop report: Facilitating oral product development and reducing regulatory burden through novel approaches to assess bioavailability/bioequivalence.

James E Polli1, Jack A Cook, Barbara M Davit, Paul A Dickinson, Domenick Argenti, Nancy Barbour, Alfredo García-Arieta, Jean-Marie Geoffroy, Kerry Hartauer, Shoufeng Li, Amitava Mitra, Francis X Muller, Vivek Purohit, Manuel Sanchez-Felix, John W Skoug, Kin Tang.   

Abstract

This summary workshop report highlights presentations and over-arching themes from an October 2011 workshop. Discussions focused on best practices in the application of biopharmaceutics in oral drug product development and evolving bioequivalence approaches. Best practices leverage biopharmaceutic data and other drug, formulation, and patient/disease data to identify drug development challenges in yielding a successfully performing product. Quality by design and product developability paradigms were discussed. Development tools include early development strategies to identify critical absorption factors and oral absorption modeling. An ongoing theme was the desire to comprehensively and systematically assess risk of product failure via the quality target product profile and root cause and risk analysis. However, a parallel need is reduced timelines and fewer resources. Several presentations discussed applying Biopharmaceutics Classification System (BCS) and in vitro-in vivo correlations in development and in post-development and discussed both resource savings and best scientific practices. The workshop also focused on evolving bioequivalence approaches, with emphasis on highly variable products (HVDP), as well as specialized modified-release products. In USA, two bioequivalence approaches for HVDP are the reference-scaled average bioequivalence approach and the two-stage group-sequential design. An adaptive sequential design approach is also acceptable in Canada. In European Union, two approaches for HVDP are a two-stage design and an approach to widen C (max) acceptance limits. For some specialized modified-release products, FDA now requests partial area under the curve. Rationale and limitations of such metrics were discussed (e.g., zolpidem and methylphenidate). A common theme was the benefit of the scientific and regulatory community developing, validating, and harmonizing newer bioequivalence methodologies (e.g., BCS-based waivers and HVDP trial designs).

Entities:  

Mesh:

Year:  2012        PMID: 22684402      PMCID: PMC3385831          DOI: 10.1208/s12248-012-9376-z

Source DB:  PubMed          Journal:  AAPS J        ISSN: 1550-7416            Impact factor:   4.009


  20 in total

1.  Do regulatory bioequivalence requirements adequately reflect the therapeutic equivalence of modified-release drug products?

Authors:  Laszlo Endrenyi; Laszlo Tothfalusi
Journal:  J Pharm Pharm Sci       Date:  2010-05-10       Impact factor: 2.327

2.  Meeting report: applied biopharmaceutics and quality by design for dissolution/release specification setting: product quality for patient benefit.

Authors:  Arzu Selen; Maria T Cruañes; Anette Müllertz; Paul A Dickinson; Jack A Cook; James E Polli; Filippos Kesisoglou; John Crison; Kevin C Johnson; Gordon T Muirhead; Timothy Schofield; Yi Tsong
Journal:  AAPS J       Date:  2010-06-02       Impact factor: 4.009

3.  Challenges and opportunities in establishing scientific and regulatory standards for assuring therapeutic equivalence of modified-release products: workshop summary report.

Authors:  Mei-Ling Chen; Vinod P Shah; Derek Ganes; Kamal K Midha; James Caro; Prabu Nambiar; Mario L Rocci; Avinash G Thombre; Bertil Abrahamsson; Dale Conner; Barbara Davit; Paul Fackler; Colm Farrell; Suneel Gupta; Russell Katz; Mehul Mehta; Sheldon H Preskorn; Gerard Sanderink; Salomon Stavchansky; Robert Temple; Yaning Wang; Helen Winkle; Lawrence Yu
Journal:  Eur J Pharm Sci       Date:  2010-03-27       Impact factor: 4.384

4.  Generalization of a prototype intelligent hybrid system for hard gelatin capsule formulation development.

Authors:  Wendy I Wilson; Yun Peng; Larry L Augsburger
Journal:  AAPS PharmSciTech       Date:  2005-10-22       Impact factor: 3.246

5.  Pharmaceutical quality by design: product and process development, understanding, and control.

Authors:  Lawrence X Yu
Journal:  Pharm Res       Date:  2008-01-10       Impact factor: 4.200

Review 6.  Clinical relevance of dissolution testing in quality by design.

Authors:  Paul A Dickinson; Wang Wang Lee; Paul W Stott; Andy I Townsend; John P Smart; Parviz Ghahramani; Tracey Hammett; Linda Billett; Sheena Behn; Ryan C Gibb; Bertil Abrahamsson
Journal:  AAPS J       Date:  2008-08-07       Impact factor: 4.009

7.  Quality by design for biopharmaceuticals.

Authors:  Anurag S Rathore; Helen Winkle
Journal:  Nat Biotechnol       Date:  2009-01       Impact factor: 54.908

8.  Development strategies for IVIVC in an industrial environment.

Authors:  Jack A Cook
Journal:  Biopharm Drug Dispos       Date:  2012-05-29       Impact factor: 1.627

9.  Highly variable drugs: observations from bioequivalence data submitted to the FDA for new generic drug applications.

Authors:  Barbara M Davit; Dale P Conner; Beth Fabian-Fritsch; Sam H Haidar; Xiaojian Jiang; Devvrat T Patel; Paul R H Seo; Keri Suh; Christina L Thompson; Lawrence X Yu
Journal:  AAPS J       Date:  2008-03-05       Impact factor: 4.009

10.  In vitro studies are sometimes better than conventional human pharmacokinetic in vivo studies in assessing bioequivalence of immediate-release solid oral dosage forms.

Authors:  James E Polli
Journal:  AAPS J       Date:  2008-05-24       Impact factor: 4.009

View more
  8 in total

1.  Bioequivalence of highly variable drugs: a comparison of the newly proposed regulatory approaches by FDA and EMA.

Authors:  Vangelis Karalis; Mira Symillides; Panos Macheras
Journal:  Pharm Res       Date:  2011-12-28       Impact factor: 4.200

2.  Quality-by-design: are we there yet?

Authors:  Jack Cook; Maria T Cruañes; Manish Gupta; Steve Riley; John Crison
Journal:  AAPS PharmSciTech       Date:  2013-11-12       Impact factor: 3.246

Review 3.  Two-stage designs in bioequivalence trials.

Authors:  Helmut Schütz
Journal:  Eur J Clin Pharmacol       Date:  2015-01-22       Impact factor: 2.953

4.  Characterising Drug Release from Immediate-Release Formulations of a Poorly Soluble Compound, Basmisanil, Through Absorption Modelling and Dissolution Testing.

Authors:  Cordula Stillhart; Neil J Parrott; Marc Lindenberg; Pascal Chalus; Darren Bentley; Anikó Szepes
Journal:  AAPS J       Date:  2017-02-24       Impact factor: 4.009

5.  An insight into the properties of a two-stage design in bioequivalence studies.

Authors:  Vangelis Karalis; Panos Macheras
Journal:  Pharm Res       Date:  2013-04-09       Impact factor: 4.200

6.  Statistical comparison of dissolution profiles to predict the bioequivalence of extended release formulations.

Authors:  J D Gomez-Mantilla; U F Schaefer; V G Casabo; T Lehr; C M Lehr
Journal:  AAPS J       Date:  2014-05-23       Impact factor: 4.009

7.  Approaches for Establishing Clinically Relevant Dissolution Specifications for Immediate Release Solid Oral Dosage Forms.

Authors:  Andre Hermans; Andreas M Abend; Filippos Kesisoglou; Talia Flanagan; Michael J Cohen; Dorys A Diaz; Y Mao; Limin Zhang; Gregory K Webster; Yiqing Lin; David A Hahn; Carrie A Coutant; Haiyan Grady
Journal:  AAPS J       Date:  2017-08-22       Impact factor: 4.009

8.  Steady-state bioavailability of extended-release methylphenidate (MPH-MLR) capsule vs. immediate-release methylphenidate tablets in healthy adult volunteers.

Authors:  Akwete Adjei; Robert J Kupper; Nathan S Teuscher; Sharon Wigal; Floyd Sallee; Ann Childress; Scott H Kollins; Laurence Greenhill
Journal:  Clin Drug Investig       Date:  2014-11       Impact factor: 2.859

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.