Literature DB >> 2250085

Influence of water exposure on the tensile strength of composites.

K J Söderholm1, M J Roberts.   

Abstract

The objective of this study was to investigate whether water storage causes permanent damage to composites by determining how the tensile strength of nine different composite materials changes with both water storage and water storage followed by dehydration. Eighteen samples (ASTM-D Specification 1708-66) of each of the nine materials were prepared and divided into three groups of six samples each. Group I was stored dry at 60 degrees C, while Groups II and III were stored in distilled water at 60 degrees C. After six months, Groups I and II were subjected to tensile testing, while Group III was transferred to a desiccator and dehydrated for two weeks at 60 degrees C before this group was tested in tension. Mean values, pooled by storage group independent of material, revealed a significant (p less than 0.05) reduction in strength for both Groups II and III relative to Group I. These findings prove that water has an irreversible effect on most dental composites. A comparison of Group II with Group III data revealed that the samples which were aged in water and tested (Group II) were significantly (p less than 0.05) weaker than the dehydrated samples (Group III). However, some products within Group III did not show any tendency to recover their strength after dehydration.

Entities:  

Mesh:

Substances:

Year:  1990        PMID: 2250085     DOI: 10.1177/00220345900690120501

Source DB:  PubMed          Journal:  J Dent Res        ISSN: 0022-0345            Impact factor:   6.116


  19 in total

1.  Time-dependent strength and fatigue resistance of dental direct restorative materials.

Authors:  Ulrich Lohbauer; Roland Frankenberger; Norbert Krämer; Anselm Petschelt
Journal:  J Mater Sci Mater Med       Date:  2003-12       Impact factor: 3.896

2.  Biocompatibility and bond degradation of poly-acrylic acid coated copper iodide-adhesives.

Authors:  Adi ALGhanem; Gabriela Fernandes; Michelle Visser; Rosemary Dziak; Walter G Renné; Camila Sabatini
Journal:  Dent Mater       Date:  2017-07-13       Impact factor: 5.304

3.  Color changes in staining solutions of four light-cured indirect resin composites.

Authors:  Christina Kentrou; Triantafillos Papadopoulos; Panagiotis Lagouvardos
Journal:  Odontology       Date:  2013-02-16       Impact factor: 2.634

4.  Evaluation of colour stability of provisional restorative materials exposed to different mouth rinses at varying time intervals: an in vitro study.

Authors:  D Krishna Prasad; Harshitha Alva; Manoj Shetty
Journal:  J Indian Prosthodont Soc       Date:  2013-03-22

5.  Mechanical performance of novel bioactive glass containing dental restorative composites.

Authors:  D Khvostenko; J C Mitchell; T J Hilton; J L Ferracane; J J Kruzic
Journal:  Dent Mater       Date:  2013-09-17       Impact factor: 5.304

6.  Advancing Discontinuous Fiber-Reinforced Composites above Critical Length for Replacing Current Dental Composites and Amalgam.

Authors:  Richard C Petersen
Journal:  J Nat Sci       Date:  2017-02

7.  Mechanical Properties Comparing Composite Fiber Length to Amalgam.

Authors:  Richard C Petersen; Perng-Ru Liu
Journal:  J Compos       Date:  2016

8.  Important Dental Fiber-Reinforced Composite Molding Compound Breakthroughs.

Authors:  Richard C Petersen
Journal:  EC Dent Sci       Date:  2017-05-02

Review 9.  Degradation, fatigue, and failure of resin dental composite materials.

Authors:  J L Drummond
Journal:  J Dent Res       Date:  2008-08       Impact factor: 6.116

10.  Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing.

Authors:  Mutlu Özcan; Pedro Henrique Corazza; Susana Maria Salazar Marocho; Silvia Helena Barbosa; Marco Antonio Bottino
Journal:  Clin Oral Investig       Date:  2012-10-19       Impact factor: 3.573

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.