PURPOSE: Accurate retrograde drilling for osteochondritis dissecans lesions remains technically challenging. A novel, radiation-free method using an electromagnetic guidance system was developed, and its feasibility and accuracy for retrograde drilling procedures evaluated in an experimental setting. METHODS: Sixteen arthroscopically assisted, electromagnetically guided retrograde drilling procedures were performed in 4 human cadaveric knee joints. Therefore, two artificial cartilage lesions were set consecutively on each condyle. Final drill bit position was documented in two planes using fluoroscopy. Subsequently, drilling accuracy was measured in terms of distance from the final position of the drill bit to the articular cartilage surface (D1), and distance between the tip of the drill bit to the centre of the cartilage lesion on the articular cartilage surface (D2). All procedures were timed using a stopwatch. RESULTS: Successful retrograde drilling was accomplished in all 16 cases. The overall mean time for the retrograde drilling procedures was 361.6 ± 34.7 s. Mean D1 was 2.2 ± 0.5 mm; mean D2 was 0.8 ± 0.7 mm. No complications occurred. CONCLUSIONS: The novel electromagnetic guidance system used in this study showed accurate targeting results, required no radiation, was associated with no complications and demonstrated user-friendliness. LEVEL OF EVIDENCE: II.
PURPOSE: Accurate retrograde drilling for osteochondritis dissecans lesions remains technically challenging. A novel, radiation-free method using an electromagnetic guidance system was developed, and its feasibility and accuracy for retrograde drilling procedures evaluated in an experimental setting. METHODS: Sixteen arthroscopically assisted, electromagnetically guided retrograde drilling procedures were performed in 4 human cadaveric knee joints. Therefore, two artificial cartilage lesions were set consecutively on each condyle. Final drill bit position was documented in two planes using fluoroscopy. Subsequently, drilling accuracy was measured in terms of distance from the final position of the drill bit to the articular cartilage surface (D1), and distance between the tip of the drill bit to the centre of the cartilage lesion on the articular cartilage surface (D2). All procedures were timed using a stopwatch. RESULTS: Successful retrograde drilling was accomplished in all 16 cases. The overall mean time for the retrograde drilling procedures was 361.6 ± 34.7 s. Mean D1 was 2.2 ± 0.5 mm; mean D2 was 0.8 ± 0.7 mm. No complications occurred. CONCLUSIONS: The novel electromagnetic guidance system used in this study showed accurate targeting results, required no radiation, was associated with no complications and demonstrated user-friendliness. LEVEL OF EVIDENCE: II.
Authors: Christian J Seebauer; Hermann J Bail; Florian Wichlas; Tobias Jung; Ioannis S Papanikolaou; Ivo van der Voort; Jens C Rump; René Schilling; Andreas Winkelmann; Thula Walther; Sasha S Chopra; Ulf K M Teichgräber Journal: Radiology Date: 2009-06-30 Impact factor: 11.105
Authors: Michael Hoffmann; Maximilian Hartel; Malte Schroeder; Oliver Reinsch; Alexander S Spiro; Andreas H Ruecker; Lars Grossterlinden; Daniel Briem; Johannes M Rueger; Jan Phillip Petersen Journal: Knee Surg Sports Traumatol Arthrosc Date: 2013-07-17 Impact factor: 4.342