PURPOSE: This study evaluated the fracture toughness (FT) of one denture base (Lucitone 550 - L) and four hard reline resins [Ufi Gel Hard (UH), Tokuyama Rebase II (TR), New Truliner (NT) and Kooliner (K)], and the effect of long-term water storage on this property. MATERIALS AND METHODS: Forty specimens (40 × 8 × 4 mm) of each material were made, and FT was assessed after polymerisation (control of reliners), after 48 ± 2 h in water at 37°C (control of denture base resin) and after storage in water at 37°C for 7, 90 or 180 days (all materials). Data (MPa.m(1/2) ) were analysed by two-way anova and Games-Howell test (p = 0.05). RESULTS: Resin L exhibited the highest FT mean values. After 180 days of storage, FT mean values of L (3.37), UH (1.53) and K (1.20) were higher than those of the other periods. FT mean values of NT decreased from control (1.63) to 7 days (1.30) and then remained constant. FT mean values of TR (1.13) were similar in all periods of analysis. CONCLUSION: The denture base resin L showed higher FT mean values than the reline resins. Long-term water storage increased the FT of L, UH and K, reduced the FT of NT and did not influence the FT of TR.
PURPOSE: This study evaluated the fracture toughness (FT) of one denture base (Lucitone 550 - L) and four hard reline resins [Ufi Gel Hard (UH), Tokuyama Rebase II (TR), New Truliner (NT) and Kooliner (K)], and the effect of long-term water storage on this property. MATERIALS AND METHODS: Forty specimens (40 × 8 × 4 mm) of each material were made, and FT was assessed after polymerisation (control of reliners), after 48 ± 2 h in water at 37°C (control of denture base resin) and after storage in water at 37°C for 7, 90 or 180 days (all materials). Data (MPa.m(1/2) ) were analysed by two-way anova and Games-Howell test (p = 0.05). RESULTS: Resin L exhibited the highest FT mean values. After 180 days of storage, FT mean values of L (3.37), UH (1.53) and K (1.20) were higher than those of the other periods. FT mean values of NT decreased from control (1.63) to 7 days (1.30) and then remained constant. FT mean values of TR (1.13) were similar in all periods of analysis. CONCLUSION: The denture base resin L showed higher FT mean values than the reline resins. Long-term water storage increased the FT of L, UH and K, reduced the FT of NT and did not influence the FT of TR.
Authors: Cíntia de Souza Silva; Ana Lucia Machado; Carolina de Andrade Lima Chaves; Ana Cláudia Pavarina; Carlos Eduardo Vergani Journal: J Appl Oral Sci Date: 2013 Impact factor: 2.698