Literature DB >> 21982445

From random sphere packings to regular pillar arrays: effect of the macroscopic confinement on hydrodynamic dispersion.

Anton Daneyko1, Siarhei Khirevich, Alexandra Höltzel, Andreas Seidel-Morgenstern, Ulrich Tallarek.   

Abstract

Flow and mass transport in bulk and confined chromatographic supports comprising random packings of solid, spherical particles and hexagonal arrays of solid cylinders (regular pillar arrays) are studied over a wide flow velocity range by a numerical analysis scheme, which includes packing generation by a modified Jodrey-Tory algorithm, three-dimensional flow field calculations by the lattice-Boltzmann method, and modeling of advective-diffusive mass transport by a random-walk particle-tracking technique. We demonstrate the impact of the confinement and its cross-sectional geometry (circular, quadratic, semicircular) on transient and asymptotic transverse and longitudinal dispersion in random sphere packings, and also address the influence of protocol-dependent packing disorder and the particle-aspect ratio. Plate height curves are analyzed with the Giddings equation to quantify the transcolumn contribution to eddy dispersion. Confined packings are compared with confined arrays under the condition of identical bed porosity, conduit cross-sectional area, and laterally fully equilibrated geometrical wall and corner effects on dispersion. Fluid dispersion in a regular pillar array is stronger affected by the macroscopic confinement and does not resemble eddy dispersion in random sphere packings, because the regular microstructure cannot function as a mechanical mixer like the random morphology. Giddings' coupling theory fails to preserve the nature of transverse dispersion behind the arrays' plate height curves, which approach a linear velocity-dependence as transverse dispersion becomes velocity-independent. Upon confinement this pseudo-diffusive behavior can outweigh the performance advantage of the regular over the random morphology.
Copyright © 2011 Elsevier B.V. All rights reserved.

Mesh:

Year:  2011        PMID: 21982445     DOI: 10.1016/j.chroma.2011.09.039

Source DB:  PubMed          Journal:  J Chromatogr A        ISSN: 0021-9673            Impact factor:   4.759


  5 in total

1.  Modeling of dispersion in a polymeric chromatographic monolith.

Authors:  Harun Koku; Robert S Maier; Mark R Schure; Abraham M Lenhoff
Journal:  J Chromatogr A       Date:  2012-03-08       Impact factor: 4.759

2.  Bed morphological features associated with an optimal slurry concentration for reproducible preparation of efficient capillary ultrahigh pressure liquid chromatography columns.

Authors:  Arved E Reising; Justin M Godinho; James W Jorgenson; Ulrich Tallarek
Journal:  J Chromatogr A       Date:  2017-05-04       Impact factor: 4.759

3.  Implementation of high slurry concentration and sonication to pack high-efficiency, meter-long capillary ultrahigh pressure liquid chromatography columns.

Authors:  Justin M Godinho; Arved E Reising; Ulrich Tallarek; James W Jorgenson
Journal:  J Chromatogr A       Date:  2016-08-01       Impact factor: 4.759

4.  Experimental Quantification of Gas Dispersion in 3D-Printed Logpile Structures Using a Noninvasive Infrared Transmission Technique.

Authors:  Leon R S Rosseau; Merlijn A M R Schinkel; Ivo Roghair; Martin van Sint Annaland
Journal:  ACS Eng Au       Date:  2022-05-02

5.  Filling of Irregular Channels with Round Cross-Section: Modeling Aspects to Study the Properties of Porous Materials.

Authors:  Yamel Ungson; Larysa Burtseva; Edwin R Garcia-Curiel; Benjamin Valdez Salas; Brenda L Flores-Rios; Frank Werner; Vitalii Petranovskii
Journal:  Materials (Basel)       Date:  2018-10-05       Impact factor: 3.623

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.