Literature DB >> 21958443

Dextran and hydroxyethyl starch do not interfere with fibrinogen measurement if Clauss method with mechanical clot detection is used.

Jose Mateo, Pilar Paniagua, Tobias Koller, Victoria Moral, Jordi Fontcuberta.   

Abstract

Entities:  

Mesh:

Year:  2011        PMID: 21958443      PMCID: PMC3334723          DOI: 10.1186/cc10304

Source DB:  PubMed          Journal:  Crit Care        ISSN: 1364-8535            Impact factor:   9.097


× No keyword cloud information.

In an updated European guideline for the management of bleeding following major trauma, published in a recent issue of Critical Care, Rossaint and colleagues [1] recommended that thrombelastometry instead of other laboratory methods be used to measure fibrinogen. The authors stated that the Clauss method [2] overestimates fibrinogen concentration when colloids are given. This claim is supported by studies of patients receiving colloids in which fibrinogen was measured by an automated Clauss assay performed on an ACL-300R coagulometer (Instrumentation Laboratory, Bedford, MA, USA), which detects clot formation photo-optically [3]. Automated coagulometers use different technologies to detect fibrin clot endpoints. Some coagulometers employ mechanical principles involving the movement of a metal hook or the clot impedance of a ball bearing in a magnetic field; others use photo-optical devices to measure changes in light transmission [2]. Recently, Adam and colleagues [4] analyzed plasma diluted with different proportions of saline or hydroxyethyl starch (HES). Fibrinogen concentration was over-estimated if the clotting time was measured photo-optically in samples diluted with HES. But fibrinogen measurements in analyzers that used mechanical clot detection endpoints were accurate. Fenger-Eriksen and colleagues [5] assessed the accuracy of fibrinogen measurements in different analyzers and different methods in plasma diluted in different proportions with saline, HES, and albumin. The authors found that the photo-optical measurement overestimated fibrinogen concentration but that mechanical detection did not. Thromboelastometry seems to be a rapid and accurate estimation of the level and function of fibrinogen but is not available in most centers. However, most laboratories can easily measure fibrinogen by the Clauss method using mechanical detection. We recommend that the European guidelines specifying the use of thrombo-elastometry over the Clauss method be revised and qualified accordingly.

Abbreviations

HES: hydroxyethyl starch.

Competing interests

The authors declare that they have no competing interests.
  5 in total

1.  Guidelines on fibrinogen assays.

Authors:  Ian J Mackie; Steven Kitchen; Samuel J Machin; Gordon D O Lowe
Journal:  Br J Haematol       Date:  2003-05       Impact factor: 6.998

2.  Fibrinogen estimates are influenced by methods of measurement and hemodilution with colloid plasma expanders.

Authors:  Christian Fenger-Eriksen; Gary W Moore; Savita Rangarajan; Jørgen Ingerslev; Benny Sørensen
Journal:  Transfusion       Date:  2010-12       Impact factor: 3.157

3.  Photo-optical methods can lead to clinically relevant overestimation of fibrinogen concentration in plasma diluted with hydroxyethyl starch.

Authors:  Susanne Adam; Ralf Karger; Volker Kretschmer
Journal:  Clin Appl Thromb Hemost       Date:  2009-10-14       Impact factor: 2.389

4.  Management of bleeding following major trauma: an updated European guideline.

Authors:  Rolf Rossaint; Bertil Bouillon; Vladimir Cerny; Timothy J Coats; Jacques Duranteau; Enrique Fernández-Mondéjar; Beverley J Hunt; Radko Komadina; Giuseppe Nardi; Edmund Neugebauer; Yves Ozier; Louis Riddez; Arthur Schultz; Philip F Stahel; Jean-Louis Vincent; Donat R Spahn
Journal:  Crit Care       Date:  2010-04-06       Impact factor: 9.097

5.  Dextran and hydroxyethyl starch interfere with fibrinogen assays.

Authors:  S T Hiippala
Journal:  Blood Coagul Fibrinolysis       Date:  1995-12       Impact factor: 1.276

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.