Literature DB >> 21806757

Effect of three indigenous food stains on resin-based, microhybrid-, and nanocomposites.

Neeraj Malhotra1, Revathi P Shenoy, Shashirashmi Acharya, Ramya Shenoy, Shreemathi Mayya.   

Abstract

PURPOSE: This study investigated the effects of three indigenous food stains (tea, tobacco, turmeric) on a nanocomposite (Ceram-X-Mono, Dentsply DeTery, Konstanz, Germany), a microhybrid posterior (P60, 3M ESPE, St. Paul, MN, USA), and a universal microhybrid (Z100, 3M ESPE) resin-based composite (RBC).
MATERIALS AND METHODS: Thirty-six disk-shaped specimens were fabricated (10 × 2 mm) for each type of RBC material, using a polytetraflouroethylene (PTFE) sheet. Specimens from each group were randomly distributed into three subgroups for each of the used stains. The baseline color values were measured using a spectrophotometer. The specimens were immersed in the staining solutions for a period of 3 hours per day for 15 days (3 hours/day × 15 days). Following this, the color change value (ΔE) was calculated. RESULTS AND
CONCLUSION: All the tested groups showed a clinically perceptible color change (ΔE values = 3.3 or >3.3), except for tea-stained P60 (ΔE = 3.15) and Z100 (ΔE = 1.63) groups. Turmeric caused the most significant color change for all the tested RBCs. The least amount of color change was observed with the Z100 (tea, ΔE = 1.63; tobacco, ΔE = 13.59; turmeric, ΔE = 38.77) group that was statistically significant from P60 (tea, ΔE = 3.15; tobacco, ΔE = 18.83; turmeric, ΔE = 57.72), and Ceram-X-Mono (tea, ΔE = 3.32; tobacco, ΔE = 18.83; turmeric, ΔE = 53.95) groups.
© 2011 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21806757     DOI: 10.1111/j.1708-8240.2011.00431.x

Source DB:  PubMed          Journal:  J Esthet Restor Dent        ISSN: 1496-4155            Impact factor:   2.843


  8 in total

1.  Influence of opacity on the color stability of a nanocomposite.

Authors:  Daiana Antoaneta Prodan; Cristina Gasparik; Diana Carla Mada; Vasile Miclăuş; Mihaela Băciuţ; Diana Dudea
Journal:  Clin Oral Investig       Date:  2014-09-13       Impact factor: 3.573

2.  Spectrophotometric Evaluation of Colour Stability of Nano Hybrid Composite Resin in Commonly Used Food Colourants in Asian Countries.

Authors:  Jyothi Chittem; Girija S Sajjan; Madhu Varma Kanumuri
Journal:  J Clin Diagn Res       Date:  2017-01-01

3.  Effect of brushing on the color stability of nanohybrid composite after immersion in brewed beverages - an in vitro study.

Authors:  Jayeeta Verma; Leena Padhye; Sidharth Verma
Journal:  Med Pharm Rep       Date:  2021-10-30

4.  The Effect of Different Polishing Methods and Storage Media on Discoloration of Resin Composites.

Authors:  Deljoo Z; Sadeghi M; Azar Mr; Bagheri R
Journal:  J Dent Biomater       Date:  2016-06

5.  Effect of different surface finishing/polishing procedures on color stability of esthetic restorative materials: A spectrophotometric evaluation.

Authors:  Riccardo Beltrami; Matteo Ceci; Gabriele De Pani; Lodovico Vialba; Ricaldone Federico; Claudio Poggio; Marco Colombo
Journal:  Eur J Dent       Date:  2018 Jan-Mar

6.  Evaluation of the Effect of Surface Polishing, Oral Beverages and Food Colorants on Color Stability and Surface Roughness of Nanocomposite Resins.

Authors:  R Veena Kumari; Hema Nagaraj; Kishore Siddaraju; Ramya Krishna Poluri
Journal:  J Int Oral Health       Date:  2015-07

7.  Does the temperature of beverages affect the surface roughness, hardness, and color stability of a composite resin?

Authors:  Duygu Tuncer; Emel Karaman; Esra Firat
Journal:  Eur J Dent       Date:  2013-04

8.  Discoloration of different esthetic restorative materials: A spectrophotometric evaluation.

Authors:  Matteo Ceci; Matteo Viola; Davide Rattalino; Riccardo Beltrami; Marco Colombo; Claudio Poggio
Journal:  Eur J Dent       Date:  2017 Apr-Jun
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.