Design, development, and analysis of a surrogate for pulmonary injury prediction.

Current anthropomorphic test devices (ATDs) measure chest acceleration and deflection to assess risk of injury to the thorax. This study presents a lung surrogate prototype designed to expand the injury assessment capabilities of ATDs to include a risk measure for pulmonary contusion (PC). The surrogate augments these existing measures by providing pressure data specific to the lung and its lobes. The prototype was created from a rendering of a 50th percentile male lung inflated to normal inspiration, obtained from clinical CT data. Surrogate size, lobe volume, and airway cross sections were selected to match the morphology of the lung. Elastomeric urethane was molded via rapid prototyping to create a functional prototype. Pressure sensors in each of the five terminal airways independently monitored pressure traces in the lobes during impacts to the surrogate. Software was created to analyze the surrogate impact pressure data, determine the lobe with the greatest pressure rise for a particular impact, and estimate the initial speed of surface deformation. Calibration testing indicates an approximately linear relationship between peak lobe pressure and surface impact speed. No type I or II errors were demonstrated during lobe detection testing. During repeatability testing, the standard deviation was between 2 and 4% of the mean peak pressure. Ongoing research will focus on correlating surrogate data, pressure pulses, or surface deformation, to risk functions for PC.