Literature DB >> 21763910

Cutting efficiency of twisted versus machined nickel-titanium endodontic files.

Dalia Mukhtar Fayyad1, Abeer A Elhakim Elgendy.   

Abstract

INTRODUCTION: The purpose of this study was to compare the efficacy of the cutting ability of two different instruments, concerning changes in the dentin thickness removed and root canal volume, by using multislice computed tomography scanning.
METHODS: Thirty single-rooted mandibular premolars were divided into two equal groups according to the preparation system used: the twisted file (TF) and ProTaper (Dentsply Maillefer, Ballaigues, Swizerland). Dentin thickness along the whole length of the root canal and canal volume were measured before and after instrumentation by using multislice computed tomography scanning and image analysis software.
RESULTS: ProTaper removed significantly more dentin from the mesiodistal and buccolingual directions of the root canal than the TF (P < .05). No significant difference was recorded for the changes in root canal volume between the two systems (P > .05).
CONCLUSIONS: The TF system was found to cut dentin efficiently with more uniform cutting than ProTaper system.
Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21763910     DOI: 10.1016/j.joen.2011.03.036

Source DB:  PubMed          Journal:  J Endod        ISSN: 0099-2399            Impact factor:   4.171


  18 in total

1.  Shaping ability of two nickel-titanium instruments activated by continuous rotation or adaptive motion: a micro-computed tomography study.

Authors:  E Pedullà; G Plotino; N M Grande; G Avarotti; G Gambarini; E Rapisarda; F Mannocci
Journal:  Clin Oral Investig       Date:  2016-02-15       Impact factor: 3.573

2.  A Comparative SEM Investigation of Smear Layer Remaining on Dentinal Walls by Three Rotary NiTi Files with Different Cross Sectional Designs in Moderately Curved Canals.

Authors:  Gaurav Sharma; Pooja Kakkar; Asit Vats
Journal:  J Clin Diagn Res       Date:  2015-03-01

3.  Cutting efficiency of nickel-titanium rotary and reciprocating instruments after prolonged use.

Authors:  Gianluca Gambarini; Alessio Giansiracusa Rubini; Giampaolo Sannino; Gianni Di Giorgio; Fabrizio Di Giorgio; Lucila Piasecki; Dina Al-Sudani; Gianluca Plotino; Luca Testarelli
Journal:  Odontology       Date:  2014-11-30       Impact factor: 2.634

4.  Computed Tomography Evaluation of Canal Transportation and Volumetric Changes in Root Canal Dentin of Curved Canals Using Mtwo, ProTaper and ProTaper Next Rotary System-An In-vitro Study.

Authors:  Mayuri Biccodu Shivashankar; Nandini Thippannanavar Niranjan; Arun Jayasheel; Mallikarjun Goud Kenchanagoudra
Journal:  J Clin Diagn Res       Date:  2016-11-01

5.  Assessment of the Centralization of Root Canal Preparation with Rotary Systems.

Authors:  Daniela Siqueira Lopes; Mariana Albuquerque Veiga Pessoa; Carlos Menezes Aguiar
Journal:  Acta Stomatol Croat       Date:  2016-09

6.  Synchrotron light-based μCT to analyse the presence of dentinal microcracks post-rotary and reciprocating NiTi instrumentation.

Authors:  Ioana Pop; Andiappan Manoharan; Franco Zanini; Giuliana Tromba; Shanon Patel; Federico Foschi
Journal:  Clin Oral Investig       Date:  2014-02-15       Impact factor: 3.573

7.  A Comparative Study of Shaping Ability of four Rotary Systems.

Authors:  Jorge Rubio; José Ignacio Zarzosa; Antonio Pallarés
Journal:  Acta Stomatol Croat       Date:  2015-12

8.  Cutting efficiency of instruments with different movements: a comparative study.

Authors:  Luigi Tocci; Gianluca Plotino; Dina Al-Sudani; Alessio Giansiracusa Rubini; Gianpaolo Sannino; Lucila Piasecki; Ermanno Putortì; Luca Testarelli; Gianluca Gambarini
Journal:  J Oral Maxillofac Res       Date:  2015-03-30

9.  Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study.

Authors:  Emmanuel João Nogueira Leal da Silva; Sara Gomes de Moura; Carolina Oliveira de Lima; Ana Flávia Almeida Barbosa; Waleska Florentino Misael; Mariane Floriano Lopes Santos Lacerda; Luciana Moura Sassone
Journal:  Restor Dent Endod       Date:  2021-02-25

10.  Comparison of the shaping ability of GT® Series X, Twisted Files and AlphaKite rotary nickel-titanium systems in simulated canals.

Authors:  Raidan Ba-Hattab; Anne-Kathrin Pröhl; Hermann Lang; Dieter Pahncke
Journal:  BMC Oral Health       Date:  2013-12-17       Impact factor: 2.757

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.