Comparison of polyurethane foam and biodegradable polymer as carriers in moving bed biofilm reactor for treating wastewater with a low C/N ratio.

This paper presents a comparison between two different materials used as carriers: inert polyurethane (PU) foam and biodegradable polymer polycaprolactone (PCL) particles for the removal of organics and nitrogen from wastewater with a low C/N ratio using moving bed biofilm reactors. The results, during a monitoring period of four months, showed that TOC and ammonium removal efficiency was higher in reactor 2 filled with PU carriers than in reactor 1 filled with PCL carriers (90% and 65% in the former, compared with 72% and 56% in the latter at an hydraulic retention time of 14 h). Reactor 1 showed good behavior in terms of total nitrogen removal as the biodegradable polymer was an effective substrate providing reducing power for denitrification. From three-dimensional excitation-emission matrix analysis, it was shown that the effluent from reactor 1 contained mainly protein-like and soluble microbial product-like substances.