Flexible fixation and fracture healing: do locked plating 'internal fixators' resemble external fixators?

External and internal fixators use bone screws that are locked to a plate or bar to prevent periosteal compression and associated impairment of blood supply. Both osteosynthesis techniques rely on secondary bone healing with callus formation with the exception of compression plating of simple, noncomminuted fractures. External fixation uses external bars for stabilization, whereas internal fixation is realized by subcutaneous placement of locking plates. Both of these "biologic" osteosynthesis methods allow a minimally invasive approach and do not compromise fracture hematoma and periosteal blood supply. Despite these similarities, differences between the two fixation methods prevail. Locked plating "internal fixators" allow a combination of biomechanical principles such as buttressing and dynamic compression. Periarticular locking plates are anatomically contoured to facilitate fixation of articular fractures. They allow for subchondral stabilization using small-diameter angular stable screws as well as buttressing of the joint and the metaphyseal component of a fracture. Biomechanically, they can be far stiffer than external fixators, because subcutaneous plates are located much closer to the bone surface than external fixator bars. External fixators have the advantage of being less expensive, highly flexible, and technically less demanding. They remain an integral part of orthopaedic surgery for emergent stabilization, for pediatric fractures, for definitive osteosynthesis in certain indications such as distal radius fractures, and for callus distraction.