Literature DB >> 21130186

In situ forming IPN hydrogels of calcium alginate and dextran-HEMA for biomedical applications.

Laura Pescosolido1, Tina Vermonden, Jos Malda, Roberta Censi, Wouter J A Dhert, Franco Alhaique, Wim E Hennink, Pietro Matricardi.   

Abstract

In situ forming hydrogels, which allow for the modulation of physico-chemical properties, and in which cell response can be tailored, are providing new opportunities for biomedical applications. Here, we describe interpenetrating polymer networks (IPNs) based on a physical network of calcium alginate (Alg-Ca), interpenetrated with a chemical one based on hydroxyethyl-methacrylate-derivatized dextran (dex-HEMA). IPNs with different concentration and degree of substitution of dex-HEMA were characterized and evaluated for protein release as well as for the behavior of embedded cells. The results demonstrated that the properties of the semi-IPNs, which are obtained by dissolution of dex-HEMA chains into the Alg-Ca hydrogels, would allow for injection of these hydrogels. Degradation times of the IPNs after photocross-linking could be tailored from 15 to 180 days by the concentration and the degree of substitution of dex-HEMA. Further, after an initial burst release, bovine serum albumin was gradually released from the IPNs over approximately 15 days. Encapsulation of expanded chondrocytes in the IPNs revealed that cells remained viable and, depending on the composition, were able to redifferentiate, as was demonstrated by the deposition of collagen type II. These results demonstrate that these IPNs are attractive materials for pharmaceutical and biomedical applications due to their tailorable mechanical and degradation characteristics, their release kinetics and biocompatibility.
Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 21130186     DOI: 10.1016/j.actbio.2010.11.040

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  12 in total

1.  The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells.

Authors:  Riccardo Levato; William R Webb; Iris A Otto; Anneloes Mensinga; Yadan Zhang; Mattie van Rijen; René van Weeren; Ilyas M Khan; Jos Malda
Journal:  Acta Biomater       Date:  2017-08-04       Impact factor: 8.947

2.  Calcium alginate/dextran methacrylate IPN beads as protecting carriers for protein delivery.

Authors:  Giorgia D'Arrigo; Chiara Di Meo; Laura Pescosolido; Tommasina Coviello; Franco Alhaique; Pietro Matricardi
Journal:  J Mater Sci Mater Med       Date:  2012-04-24       Impact factor: 3.896

Review 3.  3D Bioprinting in Skeletal Muscle Tissue Engineering.

Authors:  Serge Ostrovidov; Sahar Salehi; Marco Costantini; Kasinan Suthiwanich; Majid Ebrahimi; Ramin Banan Sadeghian; Toshinori Fujie; Xuetao Shi; Stefano Cannata; Cesare Gargioli; Ali Tamayol; Mehmet Remzi Dokmeci; Gorka Orive; Wojciech Swieszkowski; Ali Khademhosseini
Journal:  Small       Date:  2019-04-23       Impact factor: 13.281

4.  Cell-laden photocrosslinked GelMA-DexMA copolymer hydrogels with tunable mechanical properties for tissue engineering.

Authors:  Hang Wang; Lei Zhou; Jingwen Liao; Ying Tan; Kongyou Ouyang; Chenyun Ning; Guoxin Ni; Guoxin Tan
Journal:  J Mater Sci Mater Med       Date:  2014-07-10       Impact factor: 3.896

5.  Living fabrication of functional semi-interpenetrating polymeric materials.

Authors:  Zhuojun Dai; Xiaoyu Yang; Feilun Wu; Lihua Wang; Kun Xiang; Pengcheng Li; Qingqing Lv; Jinhui Tang; Anders Dohlman; Lei Dai; Xiling Shen; Lingchong You
Journal:  Nat Commun       Date:  2021-06-08       Impact factor: 14.919

Review 6.  Current Trends in Biomaterial Utilization for Cardiopulmonary System Regeneration.

Authors:  Adegbenro Omotuyi John Fakoya; David Adeiza Otohinoyi; Joshua Yusuf
Journal:  Stem Cells Int       Date:  2018-04-29       Impact factor: 5.443

7.  Biofabrication offers future hope for tackling various obstacles and challenges in tissue engineering and regenerative medicine: A Perspective.

Authors:  Tanveer Ahmad Mir; Shintaroh Iwanaga; Taketoshi Kurooka; Hideki Toda; Shinji Sakai; Makoto Nakamura
Journal:  Int J Bioprint       Date:  2018-12-31

Review 8.  Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting.

Authors:  Amit Panwar; Lay Poh Tan
Journal:  Molecules       Date:  2016-05-25       Impact factor: 4.411

9.  Effect of chain flexibility on cell adhesion: Semi-flexible model-based analysis of cell adhesion to hydrogels.

Authors:  Jooyoung Lee; Boa Song; Ramesh Subbiah; Justin J Chung; U Hyeok Choi; Kwideok Park; Sang-Heon Kim; Seung Ja Oh
Journal:  Sci Rep       Date:  2019-02-21       Impact factor: 4.379

Review 10.  Interpenetrating polymer networks as innovative drug delivery systems.

Authors:  Alka Lohani; Garima Singh; Shiv Sankar Bhattacharya; Anurag Verma
Journal:  J Drug Deliv       Date:  2014-05-14
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.