Literature DB >> 21077983

Influence of pigments and opacifiers on color stability of an artificially aged facial silicone.

Daniela Micheline dos Santos1, Marcelo Coelho Goiato, Amália Moreno, Aldiéris Alves Pesqueira, Marcela Filiè Haddad.   

Abstract

PURPOSE: The aim of this study was to evaluate the influence of two pigments (ceramic powder and oil paint) and one opacifier (barium sulfate) on the color stability of MDX4-4210 facial silicone submitted to accelerated aging.
MATERIALS AND METHODS: Sixty specimens of silicone were fabricated and divided into six groups--colorless (G1), colorless with opacifier (G2), ceramic (G3), ceramic with opacifier (G4), oil (G5), oil with opacifier (G6). All replicas were submitted to accelerated aging for 1008 hours. The evaluations of chromatic alteration through visual analysis and reflection spectrophotometry were carried out initially and after 252, 504, and 1008 hours of aging. The results were submitted to ANOVA and Tukey's test at 5% level of significance.
RESULTS: All groups exhibited chromatic alteration (ΔE > 0); however, this color alteration was not perceptible through visual analysis of the color. The pigmented groups with opacifier presented the lowest ΔE values, with a statistical difference from the other groups. For the groups without opacifier, the group pigmented with oil paint exhibited the lowest ΔE values in the different aging periods, with a statistical difference. Accelerated aging generated significant chromatic alterations in all groups after 252 hours, except for the colorless and oil groups, both with opacifier (G2 and G6).
CONCLUSIONS: The opacifier protects facial silicones against color degradation, and oil paint is a stable pigment even without addition of opacifier.
© 2010 by The American College of Prosthodontists.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 21077983     DOI: 10.1111/j.1532-849X.2010.00657.x

Source DB:  PubMed          Journal:  J Prosthodont        ISSN: 1059-941X            Impact factor:   2.752


  8 in total

1.  Influence of Different Pigmentations and Accelerated Aging on the Hardness and Tear Strength of the A-2186 and MDX4-4210 Silicones.

Authors:  Estefânia Marrega Malavazi; Daniela Micheline Dos Santos; Clóvis Lamartine de Moraes Melo Neto; Fernanda Pereira de Caxias; Emily Vivianne Freitas da Silva; Lisiane Cristina Bannwart; Aldiéris Alves Pesqueira; André Luiz de Melo Moreno; André Pinheiro de Magalhães Bertoz; Marcelo Coelho Goiato
Journal:  Int J Dent       Date:  2020-08-20

2.  Influence of opacifiers on dimensional stability and detail reproduction of maxillofacial silicone elastomer.

Authors:  Marcelo C Goiato; Marcela F Haddad; Mário A C Sinhoreti; Daniela M dos Santos; Aldiéris A Pesqueira; Amália Moreno
Journal:  Biomed Eng Online       Date:  2010-12-16       Impact factor: 2.819

3.  Effect of different disinfecting procedures on the hardness and color stability of two maxillofacial elastomers over time.

Authors:  Panagiota N Eleni; Magdalini K Krokida; Gregory L Polyzois; Lawrence Gettleman
Journal:  J Appl Oral Sci       Date:  2013       Impact factor: 2.698

4.  Influence of nanoparticles on color stability, microhardness, and flexural strength of acrylic resins specific for ocular prosthesis.

Authors:  Agda Marobo Andreotti; Marcelo Coelho Goiato; Amália Moreno; Adhara Smith Nobrega; Aldiéris Alves Pesqueira; Daniela Micheline dos Santos
Journal:  Int J Nanomedicine       Date:  2014-12-10

5.  Tear Strength Analysis of MDX4-4210 and A-2186 Silicones with Different Intrinsic Pigments Incorporated by Mechanical and Industrial Methods.

Authors:  Marcelo Coelho Goiato; Adhara Smith Nobrega; Emily Vivianne Freitas da Silva; Daniela Micheline Dos Santos; André Pinheiro de Magalhães Bertoz; Mariana Vilela Sonego; Clovis Lamartine de Moraes Melo Neto
Journal:  Int J Dent       Date:  2019-12-21

6.  Impact of a mixture of nanofiller and intrinsic pigment on tear strength and hardness of two types of maxillofacial silicone elastomers.

Authors:  Faiza M Abdul-Ameer
Journal:  Dent Res J (Isfahan)       Date:  2020-08-14

7.  Influence of Different Pigment Incorporation Methods on Color, Dimensional Stability, and Detail Reproduction of Silicones.

Authors:  Adhara Smith Nobrega; Estefania Marrega Malavazi; Clóvis Lamartine de Moraes Melo Neto; Isabela Caroline de Sousa Ervolino; Lisiane Cristina Bannwart; André Pinheiro de Magalhães Bertoz; Marcelo Coelho Goiato
Journal:  Eur J Dent       Date:  2019-12-03

Review 8.  The color stability of maxillofacial silicones: A systematic review and meta analysis.

Authors:  Priya Gupta; Saee Deshpande; Usha Radke; Suresh Ughade; Rajesh Sethuraman
Journal:  J Indian Prosthodont Soc       Date:  2021 Apr-Jun
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.