Literature DB >> 2106580

The dimensional stability of elastomeric impression materials following disinfection.

E M Langenwalter1, S A Aquilino, K A Turner.   

Abstract

Public awareness of infectious diseases has focused attention on the prevention of nosocomial disease. Difficulties in sterilizing impressions have led to chemical disinfection as an alternative. Recent literature indicated a lack of consensus between researchers about distortion caused by disinfection. A polysulfide, polyether, and vinyl polysiloxane were disinfected by immersion in iodophor, sodium hypochlorite, and glutaraldehyde. Distortion was evaluated by use of a stainless steel die (ADA specification No. 19). Linear dimension variations after disinfection were clinically insignificant.

Entities:  

Mesh：

Substances：

Year:  1990        PMID： 2106580     DOI： 10.1016/0022-3913(90)90193-g

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  6 in total

1.  Preliminary SEM Observations on the Surface of Elastomeric Impression Materials after Immersion or Ozone Disinfection.

Authors:  Nikolas Poulis; Anthony Prombonas; Stavros Yannikakis; Thanasis Karampotsos; Martha-Spyridoula Katsarou; Nikolaos Drakoulis
Journal:  J Clin Diagn Res       Date:  2016-12-01

2.  Comparative evaluation of the effect of electrolyzed oxidizing water on surface detail reproduction, dimensional stability and Surface texture of poly vinyl siloxane impressions.

Authors:  A S Mahalakshmi; Vidhya Jeyapalan; Vallabh Mahadevan; Chitra Shankar Krishnan; N S Azhagarasan; Hariharan Ramakrishnan
Journal:  J Indian Prosthodont Soc       Date:  2019 Jan-Mar

3.  An in vitro study to evaluate the effect on dimensional changes of elastomers during cold sterilization.

Authors:  Poonam K Khinnavar; B H Dhanya Kumar; D B Nandeeshwar
Journal:  J Indian Prosthodont Soc       Date:  2015 Apr-Jun

4.  The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials.

Authors:  Usama Nassar; Carlos Flores-Mir; Giseon Heo; Ysidora Torrealba
Journal:  J Adv Prosthodont       Date:  2017-06-19       Impact factor: 1.904

Review 5.  The elastomers for complete denture impression: A review of the literature.

Authors:  Elie E Daou
Journal:  Saudi Dent J       Date:  2010-07-17

6.  Dimensional stability of two impression materials after a 6-month storage period.

Authors:  Francisco Martins; Patrícia Branco; José Reis; Ignacio Barbero Navarro; Paulo Maurício
Journal:  Acta Biomater Odontol Scand       Date:  2017-11-14
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.