Literature DB >> 20954204

Comparison of pulsed photothermal radiometry, optical coherence tomography and ultrasound for melanoma thickness measurement in PDMS tissue phantoms.

Tianyi Wang1, Srivalleesha Mallidi, Jinze Qiu, Li L Ma, Amit S Paranjape, Jingjing Sun, Roman V Kuranov, Keith P Johnston, Thomas E Milner.   

Abstract

Melanoma accounts for 75% of all skin cancer deaths. Pulsed photothermal radiometry (PPTR), optical coherence tomography (OCT) and ultrasound (US) are non-invasive imaging techniques that may be used to measure melanoma thickness, thus, determining surgical margins. We constructed a series of PDMS tissue phantoms simulating melanomas of different thicknesses. PPTR, OCT and US measurements were recorded from PDMS tissue phantoms and results were compared in terms of axial imaging range, axial resolution and imaging time. A Monte Carlo simulation and three-dimensional heat transfer model was constructed to simulate PPTR measurement. Experimental results show that PPTR and US can provide a wide axial imaging range (75 μm-1.7 mm and 120-910 μm respectively) but poor axial resolution (75 and 120 μm respectively) in PDMS tissue phantoms, while OCT has the most superficial axial imaging range (14-450 μm) but highest axial resolution (14 μm). The Monte Carlo simulation and three-dimensional heat transfer model give good agreement with PPTR measurement. PPTR and US are suited to measure thicker melanoma lesions (>400 μm), while OCT is better to measure thin melanoma lesions (<400 μm).
Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20954204     DOI: 10.1002/jbio.201000078

Source DB:  PubMed          Journal:  J Biophotonics        ISSN: 1864-063X            Impact factor:   3.207


  7 in total

1.  Three-dimensional, distendable bladder phantom for optical coherence tomography and white light cystoscopy.

Authors:  Kristen L Lurie; Gennifer T Smith; Saara A Khan; Joseph C Liao; Audrey K Ellerbee
Journal:  J Biomed Opt       Date:  2014-03       Impact factor: 3.170

2.  Patient-specific brain arteries molded as a flexible phantom model using 3D printed water-soluble resin.

Authors:  Daniel P G Nilsson; Madelene Holmgren; Petter Holmlund; Anders Wåhlin; Anders Eklund; Tobias Dahlberg; Krister Wiklund; Magnus Andersson
Journal:  Sci Rep       Date:  2022-06-17       Impact factor: 4.996

3.  Depigmented skin and phantom color measurements for realistic prostheses.

Authors:  Paul Tanner; Sancy Leachman; Kenneth Boucher; Tunçer Burak Ozçelik
Journal:  Skin Res Technol       Date:  2013-06-10       Impact factor: 2.365

4.  Fabrication of 3D Fingerprint Phantoms via Unconventional Polycarbonate Molding.

Authors:  Clayton W Schultz; Jessica X H Wong; Hua-Zhong Yu
Journal:  Sci Rep       Date:  2018-06-25       Impact factor: 4.379

5.  The clinical usefulness of optical coherence tomography during cancer interventions.

Authors:  Labrinus van Manen; Jouke Dijkstra; Claude Boccara; Emilie Benoit; Alexander L Vahrmeijer; Michalina J Gora; J Sven D Mieog
Journal:  J Cancer Res Clin Oncol       Date:  2018-06-20       Impact factor: 4.553

6.  Multispectral Imaging Algorithm Predicts Breslow Thickness of Melanoma.

Authors:  Szabolcs Bozsányi; Noémi Nóra Varga; Klára Farkas; András Bánvölgyi; Kende Lőrincz; Ilze Lihacova; Alexey Lihachev; Emilija Vija Plorina; Áron Bartha; Antal Jobbágy; Enikő Kuroli; György Paragh; Péter Holló; Márta Medvecz; Norbert Kiss; Norbert M Wikonkál
Journal:  J Clin Med       Date:  2021-12-30       Impact factor: 4.241

7.  PDMS samples characterization with variations of synthesis parameters for tunable optics applications.

Authors:  Angel S Cruz-Félix; Agustin Santiago-Alvarado; Josimar Márquez-García; Jorge González-García
Journal:  Heliyon       Date:  2019-12-18
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.