Literature DB >> 20945746

Microtensile bond strength of one- and two-step self-etching adhesives on sclerotic dentin: the effects of thermocycling.

Chao Xie1, Ying Han, Xin-Yi Zhao, Zhong-Yi Wang, Hui-Ming He.   

Abstract

This study evaluated the effects of thermocycling on the microtensile bond strength (microTBS) of one- and two-step self-etch adhesives (SEAs) to sclerotic dentin. Two adhesives, Clearfil S3 Bond (S3), a one-step self-etch adhesive (1-SEA), and Clearfil SE Bond (SE), a two-step self-etch adhesive (2-SEA), were applied on cervical lesions in human premolars with sclerotic or normal dentin. After adhesive application, the lesions were restored and built up using a resin composite (Clearfil AP-X). After 24 hours in water storage, the restored teeth were sectioned into 0.7 x 0.7 mm composite-dentin beams. The beams were then aged with 0, 5,000 or 10,000 thermocycles. The use of two adhesives, two substrate types and three thermocycling regimens yielded 12 experimental groups of 14-19 beams each. The beams were subsequently subjected to microTBS testing at a crosshead speed of 1 mm/minute and statistical analyses were computed with three-way ANOVA and Tukey's post hoc test at p < 0.05. Three-way ANOVA showed statistically significant effects on bonding effectiveness by lesion type, adhesive system, thermocycling or combinations of the adhesive system and thermocycling (p < 0.05). With sclerotic dentin, although S3 and SE provided comparable microTBS after 24 hours of water storage, S3 showed significantly lower microTBS than SE after thermocycling (p < 0.05). Regardless of lesion type, the microTBS for S3 decreased significantly after 5,000 or 10,000 thermocycles, while the microTBS for SE showed a significant decrease only after 10,000 thermocycles. Regardless of the extent of thermocycling, the microTBS values for either SE or S3 bonded to sclerotic dentin were significantly lower than to normal dentin (p < 0.05). The results suggested that thermocycling had a significant negative effect on the bond strength of the two SEAs tested. In contrast to 2-SEA, 1-SEA might not be a good choice for sclerotic dentin when seeking durability of the resin-dentin bond.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20945746     DOI: 10.2341/10-025-L

Source DB:  PubMed          Journal:  Oper Dent        ISSN: 0361-7734            Impact factor:   2.440


  12 in total

1.  Effect of thermocycling on the bond strength of composite resin to bur and laser treated composite resin.

Authors:  Özden Özel Bektas; Digdem Eren; Seyda Herguner Siso; Gulsah E Akin
Journal:  Lasers Med Sci       Date:  2011-07-16       Impact factor: 3.161

2.  Dislodgement resistance and adhesive pattern of different endodontic sealers to dentine wall after artificial ageing: an in-vitro study.

Authors:  Galvin Sim Siang Lin; Nik Rozainah Nik Abdul Ghani; Tahir Yusuf Noorani; Noor Huda Ismail; Noraida Mamat
Journal:  Odontology       Date:  2020-07-04       Impact factor: 2.634

3.  Bond Strength of Fiber Posts to Composite Core: Effect of Surface Treatment With Er,Cr:YSGG Laser and Thermocycling.

Authors:  Sedighe Sadat Hashemikamangar; Masoome Hasanitabatabaee; Saman Kalantari; Mehrzad Gholampourdehaky; Ladan Ranjbaromrani; Hooman Ebrahimi
Journal:  J Lasers Med Sci       Date:  2017-12-26

4.  Comparison of two all-in-one adhesives bonded to non-carious cervical lesions--results at 3 years.

Authors:  Michael F Burrow; Martin J Tyas
Journal:  Clin Oral Investig       Date:  2011-07-26       Impact factor: 3.573

5.  Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials.

Authors:  Merve Bankoğlu Güngör; Seçil Karakoca Nemli; Bilge Turhan Bal; Senem Ünver; Aylin Doğan
Journal:  J Adv Prosthodont       Date:  2016-08-18       Impact factor: 1.904

6.  Effect of thermocycling and surface treatment on repair bond strength of composite.

Authors:  Nazanin Kiomarsi; Pardis Saburian; Nasim Chiniforush; Mohammad-Javd Karazifard; Sedighe-Sadat Hashemikamangar
Journal:  J Clin Exp Dent       Date:  2017-08-01

7.  A comparative study of the microtensile bond strength and microstructural differences between sclerotic and Normal dentine after surface pretreatment.

Authors:  Jinhua Wang; Weijian Song; Lei Zhu; Xin Wei
Journal:  BMC Oral Health       Date:  2019-10-07       Impact factor: 2.757

8.  The use of a liner under different bulk-fill resin composites: 3D GAP formation analysis by x-ray microcomputed tomography.

Authors:  Burcu Oglakci; Magrur Kazak; Nazmiye Donmez; Evrim Eliguzeloglu Dalkilic; Safiye Selin Koymen
Journal:  J Appl Oral Sci       Date:  2019-11-25       Impact factor: 2.698

9.  Effects of mechanical and thermal load cycling on micro tensile bond strength of clearfil SE bond to superficial dentin.

Authors:  Ali Reza Daneshkazemi; Abdol Rahim Davari; Ebrahim Ataei; Fariba Dastjerdi; Ehsan Hajighasemi
Journal:  Dent Res J (Isfahan)       Date:  2013-03

10.  Effect of Er,Cr:YSGG Laser at Different Output Powers on the Micromorphology and the Bond Property of Non-Carious Sclerotic Dentin to Resin Composites.

Authors:  Xiang Sun; Jinghao Ban; Xinjia Sha; Weiguo Wang; Yang Jiao; Wanshan Wang; Yanwei Yang; Jingjing Wei; Lijuan Shen; Jihua Chen
Journal:  PLoS One       Date:  2015-11-06       Impact factor: 3.240

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.