Literature DB >> 20887038

Development of a model based method for investigating facet articulation.

Daniel J Cook1, Boyle C Cheng.   

Abstract

Reported investigations of facet articulation in the human spine have often been conducted through the insertion of pressure sensitive film into the joint space, which requires incision of the facet capsule and may alter the characteristics of interaction between the facet surfaces. Load transmission through the facet has also been measured using strain gauges bonded to the articular processes. While this method allows for preservation of the facet capsule, it requires extensive instrumentation of the spine, as well as strain-gauge calibration, and is highly sensitive to placement and location of the strain gauges. The inherently invasive nature of these techniques makes it difficult to translate them into medical practice. A method has been developed to investigate facet articulation through the application of test kinematics to a specimen-specific rigid-body model of each vertebra within a lumbar spine segment. Rigid-body models of each vertebral body were developed from CT scans of each specimen. The distances between nearest-neighboring points on each facet surface were calculated for specific time frames of each specimen's flexion/extension test. A metric describing the proportion of each facet surface within a distance (2 mm) from the neighboring surface, the contact area ratio (CAR), was calculated at each of these time frames. A statistically significant difference (p<0.037) was found in the CAR between the time frames corresponding to full flexion and full extension in every level of the lumbar spine (L1-L5) using the data obtained from the seven specimens evaluated in this study. The finding that the contact area of the facet is greater in extension than flexion corresponds to other findings in the literature, as well as the generally accepted role of the facets in extension. Thus, a biomechanical method with a sufficiently sensitive metric is presented as a means to evaluate differences in facet articulation between intact and treated or between healthy and pathologic spines.

Entities:  

Mesh:

Year:  2010        PMID: 20887038     DOI: 10.1115/1.4001078

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  4 in total

Review 1.  Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions.

Authors:  Nicolas V Jaumard; William C Welch; Beth A Winkelstein
Journal:  J Biomech Eng       Date:  2011-07       Impact factor: 2.097

2.  Estimating Facet Joint Apposition with Specimen-Specific Computer Models of Subaxial Cervical Spine Kinematics.

Authors:  Ryan D Quarrington; Darcy W Thompson-Bagshaw; Claire F Jones
Journal:  Ann Biomed Eng       Date:  2021-11-17       Impact factor: 3.934

3.  Variability of manual lumbar spine segmentation.

Authors:  Daniel J Cook; David A Gladowski; Heather N Acuff; Matthew S Yeager; Boyle C Cheng
Journal:  Int J Spine Surg       Date:  2012-12-01

4.  The Effect of Axial Compression and Distraction on Cervical Facet Cartilage Apposition During Shear and Bending Motions.

Authors:  Ryan D Quarrington; Darcy W Thompson-Bagshaw; Claire F Jones
Journal:  Ann Biomed Eng       Date:  2022-03-07       Impact factor: 3.934

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.