Literature DB >> 20801184

An investigation into the effect of try-in pastes, uncured and cured resin cements on the overall color of ceramic veneer restorations: an in vitro study.

N ALGhazali1, J Laukner, G Burnside, F D Jarad, P W Smith, A J Preston.   

Abstract

OBJECTIVES: The aim of this study was to assess how different shades of try-in pastes, uncured and cured resin cements influence the overall color of porcelain veneer restorations.
METHODS: Porcelain veneers of shade Vita 1M1 VM7 and 1mm thick were applied to bovine teeth using three shades of resin cement and their try-in paste produced by three manufacturers. Analysis of variance was carried out on the color difference values (ΔE*) between the Aquagel and both the try-in paste and cured resins. An assessment of the clinical significance of ΔE* between the try-in paste and the cured resin and also between the uncured and cured resin was made.
RESULTS: There were statistically significant differences in veneers' colors when using different shades of both Calibra and Nexus resin cements (p<0.05). Also, statistically significant differences were noticed when using different shades of both Rely-X and Nexus try-in pastes (p<0.05). Color differences produced between the try-in pastes and the corresponding shades of cured resin cements ranged from ΔE* 1.05 to 3.34. The color differences between uncured and cured resins of the same shade ranged from ΔE* 0.78 to 1.41.
CONCLUSIONS: Different colored try-in pastes and resin cements produced color changes which are clinically useful in changing the color of veneer restorations and therefore aid color matching to adjacent dentition. Clinically significant differences were found between try-in pastes and the cured resin of the same shade, however, there were relatively small changes measured between uncured and cured resins. The color match achieved by the try-in paste has to be treated with caution and further assessment of the restoration made with the resin in place before curing is recommended.
Copyright © 2010 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20801184     DOI: 10.1016/j.jdent.2010.08.013

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  5 in total

1.  Effect of Ceramic Thickness and Luting Agent Shade on the Color Masking Ability of Laminate Veneers.

Authors:  Zubeda Begum; Pratik Chheda; C S Shruthi; Radhika Sonika
Journal:  J Indian Prosthodont Soc       Date:  2014-05-11

2.  Effect of ceramic translucency and luting cement shade on the color masking ability of laminate veneers.

Authors:  Bassem S M Kandil; Amena M Hamdy; Ahmed K Aboelfadl; Mohamed I El-Anwar
Journal:  Dent Res J (Isfahan)       Date:  2019 May-Jun

3.  Masking Abilities of Dental Cad/Cam Resin Composite Materials Related to Substrate and Luting Material.

Authors:  Liliana Porojan; Roxana Diana Vasiliu; Sorin Daniel Porojan
Journal:  Polymers (Basel)       Date:  2022-01-18       Impact factor: 4.329

4.  Ceramic veneers with minimum preparation.

Authors:  Leonardo Fernandes da Cunha; Rachelle Reis; Lino Santana; Jose Carlos Romanini; Ricardo Marins Carvalho; Adilson Yoshio Furuse
Journal:  Eur J Dent       Date:  2013-10

5.  Assessment of Color Stainability of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Ceramic Materials After Hot and Cold Coffee Immersion at Different Time Intervals.

Authors:  Hafiz A Adawi; Mohammed M Al Mialeem; Nasser M Al Ahmari; Mansoor Shariff; Mohammed A Qahhar; Sultan M H Muharraq; Nabiel A Alghazali
Journal:  Med Sci Monit       Date:  2021-10-03
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.