Literature DB >> 20455902

Parameters for successful implant integration revisited part I: immediate loading considered in light of the original prerequisites for osseointegration.

Oded Bahat1, Richard M Sullivan.   

Abstract

PURPOSE: With the increasing popularity and publication of loading implants at the time of placement, including at time of dental extraction and simultaneous with reconstructive procedures, the objective was to evaluate known variables identified for a traditional unloaded healing period and determine the applicability of these variables to immediate loading. MATERIALS: A total of 124 published reports available as of January 2008 that contained information about loading from the time of surgery up to 3 months postsurgically were examined in light of published variables affecting osseointegration based on a 2 stage surgical approach.
METHODS: The articles were examined to differentiate between immediate loading (within the initial 48 hours) and early/delayed loading of implants. Success or survival criteria were noted, and where reasons for failure were available, categorized according to six variables considered as determinants for maintaining a long-term bone-to-implant contact.
RESULTS: Approximately 60 of the 124 reports described immediately loading implants within 48 with single-tooth, partial, and full-arch restorations, as well as implant overdentures. The implant success or survival rates ranged from 70.8% to 100%. Most studies considered implant survival to be the only criterion for success.
CONCLUSIONS: Of six parameters identified in 1981 as influencing osseointegration, two parameters (the status of the bone/implant site and implant loading conditions) appear to have diagnostic implications, whereas three (implant design, surgical technique, and implant finish) may affect immediate loading positively or adversely.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20455902     DOI: 10.1111/j.1708-8208.2010.00279.x

Source DB:  PubMed          Journal:  Clin Implant Dent Relat Res        ISSN: 1523-0899            Impact factor:   3.932


  8 in total

1.  The influence of micro and macro-geometry in term of bone-implant interface in two implant systems: an histomorphometrical study.

Authors:  A Rocci; R Calcaterra; M DI Girolamo; M Rocci; C Rocci; L Baggi
Journal:  Oral Implantol (Rome)       Date:  2016-07-23

2.  A torque-measuring micromotor provides operator independent measurements marking four different density areas in maxillae.

Authors:  Danilo Alessio Di Stefano; Paolo Arosio; Adriano Piattelli; Vittoria Perrotti; Giovanna Iezzi
Journal:  J Adv Prosthodont       Date:  2015-02-17       Impact factor: 1.904

3.  Different performance of platform switching in equicrestal position implant: an histological study.

Authors:  A Rocci; R Calcaterra; M Rocci; C Rocci; M DI Girolamo; L Baggi
Journal:  Oral Implantol (Rome)       Date:  2016-11-13

4.  Comparison of Maximum Heat Generation during Implant Site Preparation between Single and Gradual Drilling Protocols in Artificial D1 Bone Blocks: An In Vitro Study.

Authors:  Tammam Koutiech; Omar Ahmad Heshmeh; Kamal Alkerdi; Johnny Toumi; Laith Al Sabek
Journal:  Int J Dent       Date:  2022-06-18

5.  Monitoring the Changes of Material Properties at Bone-Implant Interface during the Healing Process In Vivo: A Viscoelastic Investigation.

Authors:  Hsiang-Ho Chen; Wei-Yi Lai; Tze-Jian Chee; Ya-Hui Chan; Sheng-Wei Feng
Journal:  Biomed Res Int       Date:  2017-03-08       Impact factor: 3.411

6.  In Vitro Study on Bone Heating during Drilling of the Implant Site: Material, Design and Wear of the Surgical Drill.

Authors:  Juan Carlos Bernabeu-Mira; Hilario Pellicer-Chover; Miguel Peñarrocha-Diago; David Peñarrocha-Oltra
Journal:  Materials (Basel)       Date:  2020-04-19       Impact factor: 3.623

7.  Successful soft and hard tissue augmentation with platelet-rich fibrin in combination with bovine bone space maintainer in a delayed implant placement protocol in the esthetic zone: A case report.

Authors:  Joost E I G Brouwers; Sharon Buis; Rianne Haumann; Philip Ph G de Groot; Bas de Laat; Jasper A Remijn
Journal:  Clin Case Rep       Date:  2019-05-08

8.  Adhesion, vitality and osteogenic differentiation capacity of adipose derived stem cells seeded on nitinol nanoparticle coatings.

Authors:  Sarah Strauss; Anne Neumeister; Stephan Barcikowski; Dietmar Kracht; Jörn W Kuhbier; Christine Radtke; Kerstin Reimers; Peter M Vogt
Journal:  PLoS One       Date:  2013-01-07       Impact factor: 3.240

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.