Literature DB >> 20427069

Polyhydroxyalkanoate (PHA) production by a mixed microbial culture using sugar molasses: effect of the influent substrate concentration on culture selection.

M G E Albuquerque1, C A V Torres, M A M Reis.   

Abstract

In Polyhydroxyalkanoate (PHA) production processes using Mixed Microbial Culture (MMC), the success of the culture selection step determines, to a great extent, the PHA accumulation performance obtained in the final PHA production stage. In this study, the effect of the influent substrate concentration (30-60Cmmol VFA/L) on the selection of a PHA-storing culture using a complex feedstock, fermented sugar molasses, was assessed. At 30 and 45Cmmol VFA/L, substrate concentration impacted on the process kinetics through a substrate dependent kinetic limitation effect. However, further increasing the carbon substrate concentration to 60Cmmol VFA/L, resulted in an unforeseen growth limitation effect associated with a micronutrient deficiency of the fermented feedstock (magnesium) and high operating pH. Struvite precipitation caused a nutrient limitation which prevented biomass concentration increase, thus causing the feast to famine length ratio to vary in the selection reactor, with subsequent impact on the selective pressure for PHA-storing organisms. A highly dynamic response of the selected population to transient conditions of feast to famine ratio, in the range of 0.21-1.1, was observed. Kinetic (limiting concentration of carbon source) and physiological (loss of internal growth limitation due to the shorter length of famine phase) effects, resulting from variation of the influent substrate concentration, were subsequently demonstrated in batch studies. The culture selected at an influent substrate concentration of 45Cmmol VFA/L showed the best PHA-storing capacity since neither substrate concentration nor feast to famine ratio were limiting factors. This culture, highly enriched in PHA-storing organisms (88%), reached a maximum PHA content of 74.6%. Copyright 2010 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20427069     DOI: 10.1016/j.watres.2010.03.021

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  24 in total

1.  Highly complex substrates lead to dynamic bacterial community for polyhydroxyalkanoates production.

Authors:  Diogo Queirós; Alexandre Fonseca; Simona Rossetti; Luísa S Serafim; Paulo C Lemos
Journal:  J Ind Microbiol Biotechnol       Date:  2017-05-11       Impact factor: 3.346

2.  Long-term effect of weak nitrogen limitation on polyhydroxyalkanoates production of propionate-fed activated sludge operated at long sludge retention time.

Authors:  Hsuan-Fang Chang; Wei-Chin Chang; Cheng-Yi Tsai
Journal:  World J Microbiol Biotechnol       Date:  2012-07-12       Impact factor: 3.312

3.  Link between microbial composition and carbon substrate-uptake preferences in a PHA-storing community.

Authors:  Maria G E Albuquerque; Gilda Carvalho; Caroline Kragelund; Ana F Silva; Maria T Barreto Crespo; Maria A M Reis; Per H Nielsen
Journal:  ISME J       Date:  2012-07-19       Impact factor: 10.302

4.  Effect of temperature and cycle length on microbial competition in PHB-producing sequencing batch reactor.

Authors:  Yang Jiang; Leonie Marang; Robbert Kleerebezem; Gerard Muyzer; Mark C M van Loosdrecht
Journal:  ISME J       Date:  2010-11-25       Impact factor: 10.302

5.  Ecobiotechnological Approach for Exploiting the Abilities of Bacillus to Produce Co-polymer of Polyhydroxyalkanoate.

Authors:  Prasun Kumar; Mamtesh Singh; Sanjeet Mehariya; Sanjay K S Patel; Jung-Kul Lee; Vipin C Kalia
Journal:  Indian J Microbiol       Date:  2014-02-21       Impact factor: 2.461

6.  Polyhydroxyalkanoate synthesis by mixed microbial consortia cultured on fermented dairy manure: Effect of aeration on process rates/yields and the associated microbial ecology.

Authors:  Erik R Coats; Benjamin S Watson; Cynthia K Brinkman
Journal:  Water Res       Date:  2016-09-21       Impact factor: 11.236

7.  Sludge minimization in municipal wastewater treatment by polyhydroxyalkanoate (PHA) production.

Authors:  Francesco Valentino; Fernando Morgan-Sagastume; Serena Fraraccio; Giovanna Corsi; Giulio Zanaroli; Alan Werker; Mauro Majone
Journal:  Environ Sci Pollut Res Int       Date:  2014-07-05       Impact factor: 4.223

8.  Poly(hydroxy alkanoate)s in Medical Applications.

Authors:  K P Luef; F Stelzer; F Wiesbrock
Journal:  Chem Biochem Eng Q       Date:  2015       Impact factor: 1.582

9.  Screening and evaluation of polyhydroxybutyrate-producing strains from indigenous isolate Cupriavidus taiwanensis strains.

Authors:  Yu-Hong Wei; Wei-Chuan Chen; Chin-Kuei Huang; Ho-Shing Wu; Yi-Ming Sun; Chi-Wei Lo; Om-Murugan Janarthanan
Journal:  Int J Mol Sci       Date:  2011-01-05       Impact factor: 5.923

Review 10.  From Residues to Added-Value Bacterial Biopolymers as Nanomaterials for Biomedical Applications.

Authors:  Francisco G Blanco; Natalia Hernández; Virginia Rivero-Buceta; Beatriz Maestro; Jesús M Sanz; Aránzazu Mato; Ana M Hernández-Arriaga; M Auxiliadora Prieto
Journal:  Nanomaterials (Basel)       Date:  2021-06-04       Impact factor: 5.076

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.