Literature DB >> 20006436

Determination of ultra-trace aluminum in human albumin by cloud point extraction and graphite furnace atomic absorption spectrometry.

Mei Sun1, Qianghua Wu.   

Abstract

A cloud point extraction (CPE) method for the preconcentration of ultra-trace aluminum in human albumin prior to its determination by graphite furnace atomic absorption spectrometry (GFAAS) had been developed in this paper. The CPE method was based on the complex of Al(III) with 1-(2-pyridylazo)-2-naphthol (PAN) and Triton X-114 was used as non-ionic surfactant. The main factors affecting cloud point extraction efficiency, such as pH of solution, concentration and kind of complexing agent, concentration of non-ionic surfactant, equilibration temperature and time, were investigated in detail. An enrichment factor of 34.8 was obtained for the preconcentration of Al(III) with 10 mL solution. Under the optimal conditions, the detection limit of Al(III) was 0.06 ng mL(-1). The relative standard deviation (n=7) of sample was 3.6%, values of recovery of aluminum were changed from 92.3% to 94.7% for three samples. This method is simple, accurate, sensitive and can be applied to the determination of ultra-trace aluminum in human albumin. 2009 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 20006436     DOI: 10.1016/j.jhazmat.2009.11.121

Source DB:  PubMed          Journal:  J Hazard Mater        ISSN: 0304-3894            Impact factor:   10.588


  2 in total

1.  Spectrophotometeric determination of trace amounts of Al3+ ion in water samples after cloud point extraction using quinizarin as a complexing agent.

Authors:  Ardeshir Shokrollahi; Roghayeh Aghaei
Journal:  Environ Monit Assess       Date:  2013-09-25       Impact factor: 2.513

2.  Selective Membrane Sensor for Aluminum Determination in Food Products, Real Samples and Standard Alloys.

Authors:  Sabry Khalil; Ashraf Y Elnaggar
Journal:  Membranes (Basel)       Date:  2021-06-30
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.