Literature DB >> 20002793

Indoor/outdoor concentrations and elemental composition of PM10/PM2.5 in urban/industrial areas of Kocaeli City, Turkey.

B Pekey1, Z B Bozkurt, H Pekey, G Doğan, A Zararsiz, N Efe, G Tuncel.   

Abstract

This study presents indoor/outdoor PM2.5 and PM10 concentrations measured during winter and summer in 15 homes in Kocaeli, which is one of the most industrialized areas in Turkey. Indoor and outdoor PM2.5 and PM10 mass concentrations and elemental composition were determined using an X-ray fluorescence spectrometer. Quantitative information was obtained on mass concentrations and other characteristics such as seasonal variation, indoor/outdoor (I/O) ratio, PM2.5/PM10 ratio, correlations and sources. Average indoor and outdoor PM2.5 concentrations were 29.8 and 23.5 microg/m(3) for the summer period, and 24.4 and 21.8 microg/m(3) for the winter period, respectively. Average indoor and outdoor PM10 concentrations were 45.5 and 59.9 microg/m(3) for the summer period, and 56.9 and 102.3 microg/m(3) for the winter period, respectively. A varimax rotated factor analysis (FA) was performed separately on indoor and outdoor datasets in an effort to identify possible heavy metal sources of PM2.5 and PM10 particle fractions. FA of outdoor data produced source categories comprising polluted soil, industry, motor vehicles, and fossil fuel combustion for both PM fractions, while source categories determined for indoor data for both PM2.5 and PM10 comprised industry, polluted soil, motor vehicles, and smoking, with an additional source category of cooking activities detected for the PM2.5 fraction. Practical Implications In buildings close to industrial areas or traffic arteries, outdoor sources may have an important effect on indoor air pollution. Therefore, indoor and outdoor investigations should be conducted simultaneously to assess the relationship between indoor and outdoor pollution. This study presents the simultaneous measurement of PM fractions (PM2.5 and PM10) and their elemental compositions to determine the sources of respirable PM and the heavy metals bound to these particles in indoor air. Factor analysis of indoor data indicated that the contribution of outdoor pollutant sources to indoor pollution was about 70%, making these sources the most significant for indoor heavy metal pollution, wheras other sources of indoor pollution included smoking and cooking activities.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 20002793     DOI: 10.1111/j.1600-0668.2009.00628.x

Source DB:  PubMed          Journal:  Indoor Air        ISSN: 0905-6947            Impact factor:   5.770


  13 in total

1.  Modeling and estimating manganese concentrations in rural households in the mining district of Molango, Mexico.

Authors:  Marlene Cortez-Lugo; Sandra Rodríguez-Dozal; Irma Rosas-Pérez; Urinda Alamo-Hernández; Horacio Riojas-Rodríguez
Journal:  Environ Monit Assess       Date:  2015-11-14       Impact factor: 2.513

2.  Contribution of solid fuel, gas combustion, or tobacco smoke to indoor air pollutant concentrations in Irish and Scottish homes.

Authors:  S Semple; C Garden; M Coggins; K S Galea; P Whelan; H Cowie; A Sánchez-Jiménez; P S Thorne; J F Hurley; J G Ayres
Journal:  Indoor Air       Date:  2011-11-09       Impact factor: 5.770

3.  Effects of fine particulate on heart rate variability in Beijing: a panel study of healthy elderly subjects.

Authors:  Xiaofeng Jia; Xiaoming Song; Masayuki Shima; Kenji Tamura; Furong Deng; Xinbiao Guo
Journal:  Int Arch Occup Environ Health       Date:  2011-05-15       Impact factor: 3.015

4.  Residential indoor and personal PM10 exposures of ambient origin based on chemical components.

Authors:  Jia Xu; Zhipeng Bai; Yan You; Jian Zhou; Jiefeng Zhang; Can Niu; Yating Liu; Nan Zhang; Fei He; Xiao Ding
Journal:  J Expo Sci Environ Epidemiol       Date:  2014-05-07       Impact factor: 5.563

5.  Physicochemical characteristics, mutagenicity and genotoxicity of airborne particles under industrial and rural influences in Northern Lebanon.

Authors:  Pamela N Melki; Frédéric Ledoux; Samer Aouad; Sylvain Billet; Bilal El Khoury; Yann Landkocz; Roula M Abdel-Massih; Dominique Courcot
Journal:  Environ Sci Pollut Res Int       Date:  2017-06-15       Impact factor: 4.223

6.  Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation.

Authors:  Zehra Bozkurt; Eftade O Gaga; Fatih Taşpınar; Akif Arı; Beyhan Pekey; Hakan Pekey; Tuncay Döğeroğlu; Özlem Özden Üzmez
Journal:  Environ Monit Assess       Date:  2018-02-23       Impact factor: 2.513

7.  Workflow for Comparison of Chemical and Biological Metrics of Filter Collected PM2.5.

Authors:  Courtney Roper; Allison Perez; Damien Barrett; Perry Hystad; Staci L Massey Simonich; Robyn L Tanguay
Journal:  Atmos Environ (1994)       Date:  2020-03-05       Impact factor: 4.798

8.  Impact of different sources on the oxidative potential of ambient particulate matter PM10 in Riyadh, Saudi Arabia: A focus on dust emissions.

Authors:  Abdulmalik Altuwayjiri; Milad Pirhadi; Mohammed Kalafy; Badr Alharbi; Constantinos Sioutas
Journal:  Sci Total Environ       Date:  2021-09-29       Impact factor: 7.963

9.  Analysis of indoor particles and gases and their evolution with natural ventilation.

Authors:  Claire Fortenberry; Michael Walker; Audrey Dang; Arun Loka; Gauri Date; Karolina Cysneiros de Carvalho; Glenn Morrison; Brent Williams
Journal:  Indoor Air       Date:  2019-08-01       Impact factor: 6.554

10.  The Monetary Valuation of Lifetime Health Improvement and Life Expectancy Gains in Turkey.

Authors:  Shihomi Ara; Cem Tekeşin
Journal:  Int J Environ Res Public Health       Date:  2017-09-29       Impact factor: 3.390

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.