Literature DB >> 19962070

Influence of hydroxyapatite-coated and growth factor-releasing interference screws on tendon-bone healing in an ovine model.

Yan Lu1, Mark D Markel, Brett Nemke, J Sam Lee, Ben K Graf, William L Murphy.   

Abstract

PURPOSE: Our purpose was to determine whether a bioresorbable interference screw coated with a hydroxyapatite-based mineral layer designed to release an engineered peptide growth factor (linkBMP-2 [where "BMP-2" indicates bone morphogenetic protein 2]) improved tendon-bone healing compared with a screw without coating.
METHODS: Tagged linkBMP-2 peptides were used to quantify binding efficiency and release kinetics on 9 mineral-coated BIORCI screws (Smith & Nephew, Andover, MA). Fourteen mature female sheep were used in this study. In each of the 14 sheep, each stifle was randomized to either receive a linkBMP-2-coated or uncoated interference screw (n = 14 per treatment). The sheep were euthanized at 6 weeks after surgery. Eight sheep were subjected to biomechanical testing for peak load at failure and stiffness, and six sheep were used for histologic analysis according to a semiquantitative scoring scale.
RESULTS: The linkBMP-2 molecule bound efficiently to the surface of mineral-coated interference screws. Over 80% of the initially bound linkBMP-2 was released during a 6-week time frame in vitro. Peak load at failure in the linkBMP-2-coated interference screw group (mean +/- SD, 449.3 +/- 84.7 N) was not significantly different from that in the uncoated group (421.0 +/- 61.8 N) (P = .22). Stiffness in the linkBMP-2-coated interference screw group (157.3 +/- 39.6 N/mm) was not significantly different from that in the uncoated group (140.6 +/- 20.3 N/mm) (P = .12). Histologic analysis showed that the tendons in the linkBMP-2-coated interference screw group had higher scores (better) than the uncoated group. In the linkBMP-2-coated interference screw group, mesenchymal cells were present at the interface between screw and tendon, whereas these cells were not present in the uncoated group.
CONCLUSIONS: We found that linkBMP-2 can be bound onto a mineral-coated BIORCI interference screw surface and subsequently released from the screw surface in a sustained manner. The histologic result of this study showed that the linkBMP-2-coated interference screw significantly improved the histologic scores of early tendon-bone healing in this sheep model. CLINICAL RELEVANCE: This linkBMP-2 coating material may improve early tendon/ligament fixation.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19962070      PMCID: PMC4243967          DOI: 10.1016/j.arthro.2009.06.008

Source DB:  PubMed          Journal:  Arthroscopy        ISSN: 0749-8063            Impact factor:   4.772


  37 in total

1.  Tendon-to-bone healing of a semitendinosus tendon autograft used for ACL reconstruction in a sheep model.

Authors:  V K Goradia; M C Rochat; W A Grana; M D Rohrer; H S Prasad
Journal:  Am J Knee Surg       Date:  2000

Review 2.  Delivering on the promise of bone morphogenetic proteins.

Authors:  R H Li; J M Wozney
Journal:  Trends Biotechnol       Date:  2001-07       Impact factor: 19.536

3.  Tendon healing in a bone tunnel. Part II: Histologic analysis after biodegradable interference fit fixation in a model of anterior cruciate ligament reconstruction in sheep.

Authors:  Andreas Weiler; Reinhard F G Hoffmann; Hermann J Bail; Oliver Rehm; Norbert P Südkamp
Journal:  Arthroscopy       Date:  2002-02       Impact factor: 4.772

4.  Tendon healing in a bone tunnel. Part I: Biomechanical results after biodegradable interference fit fixation in a model of anterior cruciate ligament reconstruction in sheep.

Authors:  Andreas Weiler; Ricarda Peine; Alireza Pashmineh-Azar; Clemens Abel; Norbert P Südkamp; Reinhard F G Hoffmann
Journal:  Arthroscopy       Date:  2002-02       Impact factor: 4.772

5.  Effect of screw length on bioabsorbable interference screw fixation in a tibial bone tunnel.

Authors:  J B Selby; D L Johnson; P Hester; D N Caborn
Journal:  Am J Sports Med       Date:  2001 Sep-Oct       Impact factor: 6.202

6.  How four weeks of implantation affect the strength and stiffness of a tendon graft in a bone tunnel: a study of two fixation devices in an extraarticular model in ovine.

Authors:  Wamis Singhatat; Keith W Lawhorn; Stephen M Howell; Maury L Hull
Journal:  Am J Sports Med       Date:  2002 Jul-Aug       Impact factor: 6.202

7.  The influence of tendon length and fit on the strength of a tendon-bone tunnel complex. A biomechanical and histologic study in the dog.

Authors:  P E Greis; R T Burks; K Bachus; M G Luker
Journal:  Am J Sports Med       Date:  2001 Jul-Aug       Impact factor: 6.202

8.  Augmentation of tendon healing in an intraarticular bone tunnel with use of a bone growth factor.

Authors:  K Anderson; A M Seneviratne; K Izawa; B L Atkinson; H G Potter; S A Rodeo
Journal:  Am J Sports Med       Date:  2001 Nov-Dec       Impact factor: 6.202

9.  Bioinspired growth of crystalline carbonate apatite on biodegradable polymer substrata.

Authors:  William L Murphy; David J Mooney
Journal:  J Am Chem Soc       Date:  2002-03-06       Impact factor: 15.419

10.  Enhancement of tendon-bone integration of anterior cruciate ligament grafts with bone morphogenetic protein-2 gene transfer: a histological and biomechanical study.

Authors:  Vladimir Martinek; Christian Latterman; Arvydas Usas; Steven Abramowitch; Savio L-Y Woo; Freddie H Fu; Johnny Huard
Journal:  J Bone Joint Surg Am       Date:  2002-07       Impact factor: 5.284

View more
  17 in total

Review 1.  Scaffold translation: barriers between concept and clinic.

Authors:  Scott J Hollister; William L Murphy
Journal:  Tissue Eng Part B Rev       Date:  2011-09-21       Impact factor: 6.389

2.  Multilayered Inorganic Microparticles for Tunable Dual Growth Factor Delivery.

Authors:  Xiaohua Yu; Andrew Khalil; Phuong Ngoc Dang; Eben Alsberg; William L Murphy
Journal:  Adv Funct Mater       Date:  2014-05-28       Impact factor: 18.808

3.  Controlled multiple growth factor delivery from bone tissue engineering scaffolds via designed affinity.

Authors:  Darilis Suárez-González; Jae Sung Lee; Alisha Diggs; Yan Lu; Brett Nemke; Mark Markel; Scott J Hollister; William L Murphy
Journal:  Tissue Eng Part A       Date:  2013-12-18       Impact factor: 3.845

Review 4.  Growth factor delivery: how surface interactions modulate release in vitro and in vivo.

Authors:  William J King; Paul H Krebsbach
Journal:  Adv Drug Deliv Rev       Date:  2012-03-10       Impact factor: 15.470

5.  Mineral coatings for temporally controlled delivery of multiple proteins.

Authors:  Jae Sung Lee; Darilis Suarez-Gonzalez; William L Murphy
Journal:  Adv Mater       Date:  2011-10-04       Impact factor: 30.849

6.  Biomaterials that regulate growth factor activity via bioinspired interactions.

Authors:  Gregory A Hudalla; William L Murphy
Journal:  Adv Funct Mater       Date:  2011-05-24       Impact factor: 18.808

Review 7.  How does the pathophysiological context influence delivery of bone growth factors?

Authors:  Xiaohua Yu; Darilis Suárez-González; Andrew S Khalil; William L Murphy
Journal:  Adv Drug Deliv Rev       Date:  2014-10-17       Impact factor: 15.470

8.  Mineral coatings modulate β-TCP stability and enable growth factor binding and release.

Authors:  Darilis Suárez-González; Jae Sung Lee; Sheeny K Lan Levengood; Ray Vanderby; William L Murphy
Journal:  Acta Biomater       Date:  2011-12-02       Impact factor: 8.947

Review 9.  Tissue engineered bone mimetics to study bone disorders ex vivo: Role of bioinspired materials.

Authors:  Yuru Vernon Shih; Shyni Varghese
Journal:  Biomaterials       Date:  2018-06-06       Impact factor: 12.479

10.  A screening approach reveals the influence of mineral coating morphology on human mesenchymal stem cell differentiation.

Authors:  Siyoung Choi; William L Murphy
Journal:  Biotechnol J       Date:  2013-03-07       Impact factor: 4.677

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.