Literature DB >> 19740643

Bio-based composites from waste agricultural residues.

Alireza Ashori1, Amir Nourbakhsh.   

Abstract

The main objective of this research was to study the potential of waste agricultural residues such as sunflower stalk, corn stalk and bagasse fibers as reinforcement for thermoplastics as an alternative to wood fibers. The effects of two grades (Eastman G-3003 and G-3216) of coupling agents on the mechanical properties were also studied. In the sample preparation, one level of fiber loading (30wt.%) and three levels of coupling agent content (0, 1.5 and 2.5wt.%) were used. For overall trend, with addition of both grades of the coupling agents, tensile, flexural and impact properties of the composites significantly improved, as compared with untreated samples. In addition, morphological study revealed that the positive effect of coupling agent on interfacial bonding. The composites treated with G-3216 gave better results in comparison with G-3003. This could be caused by the high melt viscosity of G-3003. In general, bagasse fiber showed superior mechanical properties due to its chemical characteristics. Copyright 2009 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19740643     DOI: 10.1016/j.wasman.2009.08.003

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  10 in total

1.  Effect of Preservative Pretreatment on the Biological Durability of Corn Straw Fiber/HDPE Composites.

Authors:  Lihui Xuan; Dongxue Hui; Wanli Cheng; Andrew H H Wong; Guangping Han; Wei Khong Tan; Carlson A D Tawi
Journal:  Materials (Basel)       Date:  2017-07-12       Impact factor: 3.623

2.  An Attempt to Find a Suitable Biomass for Biochar-Based Polypropylene Biocomposites.

Authors:  Oisik Das; Nam Kyeun Kim; Mikael S Hedenqvist; Richard J T Lin; Ajit K Sarmah; Debes Bhattacharyya
Journal:  Environ Manage       Date:  2018-03-28       Impact factor: 3.266

3.  Basalt/Wood Hybrid Composites Based on Polypropylene: Morphology, Processing Properties, and Mechanical and Thermal Expansion Performance.

Authors:  Anna Kufel; Stanisław Kuciel
Journal:  Materials (Basel)       Date:  2019-08-11       Impact factor: 3.623

Review 4.  Production of Sustainable Construction Materials Using Agro-Wastes.

Authors:  Chrysanthos Maraveas
Journal:  Materials (Basel)       Date:  2020-01-07       Impact factor: 3.623

5.  Isolation, modification and characterisation of cellulose from wild Dioscorea bulbifera.

Authors:  Joseph Kolawole Ogunjobi; Olayinka Mary Balogun
Journal:  Sci Rep       Date:  2021-01-13       Impact factor: 4.379

Review 6.  Recent Advances in Development of Waste-Based Polymer Materials: A Review.

Authors:  Krzysztof Formela; Maria Kurańska; Mateusz Barczewski
Journal:  Polymers (Basel)       Date:  2022-03-06       Impact factor: 4.329

7.  Improvement of Interfacial Adhesion and Thermomechanical Properties of PLA Based Composites with Wheat/Rice Bran.

Authors:  Vito Gigante; Laura Aliotta; Ilaria Canesi; Marco Sandroni; Andrea Lazzeri; Maria-Beatrice Coltelli; Patrizia Cinelli
Journal:  Polymers (Basel)       Date:  2022-08-19       Impact factor: 4.967

Review 8.  Alternative Materials from Agro-Industry for Wood Panel Manufacturing-A Review.

Authors:  Nicolas Neitzel; Reza Hosseinpourpia; Thomas Walther; Stergios Adamopoulos
Journal:  Materials (Basel)       Date:  2022-06-28       Impact factor: 3.748

9.  Influence of the Design Solutions of Extruder Screw Mixing Tip on Selected Properties of Wheat Bran-Polyethylene Biocomposite.

Authors:  Emil Sasimowski; Łukasz Majewski; Marta Grochowicz
Journal:  Polymers (Basel)       Date:  2019-12-17       Impact factor: 4.329

10.  Preparation and Characterization of Dyed Corn Straw by Acid Red GR and Active Brilliant X-3B Dyes.

Authors:  Yanchen Li; Beibei Wang; Yingni Yang; Yi Liu; Hongwu Guo
Journal:  Materials (Basel)       Date:  2019-10-24       Impact factor: 3.623

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.