Shear bond strength evaluation of resin composite bonded to GIC using three different adhesives.

The current study evaluated the bonding ability of composite to glass ionomer cement (GIC) using three different bonding systems. One hundred samples of composites bonded to GIC were prepared and divided into five groups. In Group A, the composite was bonded to GIC after the initial setting of the GIC being employed as a total-etch adhesive. In Group B, the self-etch primer was employed to bond composite to GIC before the initial setting of the GIC. In Group C, the self-etch primer was employed to bond composite to the GIC after the initial setting of the GIC. In Group D, the GIC-based adhesive was employed to bond composite to the GIC before the initial setting of the GIC. In Group E, the GIC-based adhesive was employed to bond composite to the GIC after the initial setting of the GIC. Shear bond strength analysis was performed at a crosshead speed of 0.5 mm/minute. The results were tabulated and the statistical analysis was performed with one-way ANOVA; the Tukey's test showed that the bond strength of composite to GIC was significantly higher for the self-etch primer group employed on unset GIC and the GIC-based adhesive group employed on the set GIC for bonding composite to GIC.