Literature DB >> 19296544

Novel template-casting technique for fabricating beta-tricalcium phosphate scaffolds with high interconnectivity and mechanical strength and in vitro cell responses.

Yongxing Liu1, Joong-Hyun Kim, Daniel Young, Sungwoo Kim, Satoru K Nishimoto, Yunzhi Yang.   

Abstract

A novel template-casting method was developed to produce completely interconnected, macroporous biodegradable beta-tricalcium phosphate (beta-TCP) scaffolds, whose architecture and chemistry can be fully manipulated by varying the templates and casting materials. The processing route includes preparation of beta-TCP slurry; casting and shaping into preformed templates comprised of paraffin beads; solidifying, drying; and sintering. Structural, chemical, and mechanical properties of the prepared macroporous scaffolds were characterized using micro computed tomography, scanning electron microscopy, x-ray diffractometry, Fourier transform infrared spectroscopy, and mechanical testing. Human embryonic palatal mesenchymal cells were used to evaluate cell proliferation within the scaffolds in vitro. The scaffolds consisted of interconnected macropores and solid struts, leading to a reticular network. Two groups of scaffolds with larger pores, approximately 600-800 microm and smaller pores approximately 350-500 microm, were demonstrated. The interconnected windows between neighboring macropores were 440 +/- 57 microm in diameter for the larger-pored scaffolds, and 330 +/- 50 microm for the smaller-pored scaffolds. The scaffolds were highly crystallized and composed dominantly of beta-tricalcium phosphate (beta-TCP) accompanied by minor phase of hydroxyapatite (HA). The hydroxyl group was clearly detected by FTIR on the scaffolds. High mechanical strength (9.3 MPa) was demonstrated by the completely interconnected scaffolds with approximately 79% porosity. The human embryonic palatal mesenchymal (HEPM) cells proliferated well on the smaller-pored and larger-pored scaffolds, exhibiting a significantly higher level of proliferation in the first 11 days of culture on the smaller pored scaffolds. High levels of differentiation were also evidenced in both pore sizes of scaffolds. (c) 2009 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 19296544     DOI: 10.1002/jbm.a.32443

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  20 in total

1.  Creation of bony microenvironment with CaP and cell-derived ECM to enhance human bone-marrow MSC behavior and delivery of BMP-2.

Authors:  Yunqing Kang; Sungwoo Kim; Ali Khademhosseini; Yunzhi Yang
Journal:  Biomaterials       Date:  2011-05-31       Impact factor: 12.479

Review 2.  Vascularized bone tissue engineering: approaches for potential improvement.

Authors:  Lonnissa H Nguyen; Nasim Annabi; Mehdi Nikkhah; Hojae Bae; Loïc Binan; Sangwon Park; Yunqing Kang; Yunzhi Yang; Ali Khademhosseini
Journal:  Tissue Eng Part B Rev       Date:  2012-09-04       Impact factor: 6.389

Review 3.  Biomaterial selection for tooth regeneration.

Authors:  Zhenglin Yuan; Hemin Nie; Shuang Wang; Chang Hun Lee; Ang Li; Susan Y Fu; Hong Zhou; Lili Chen; Jeremy J Mao
Journal:  Tissue Eng Part B Rev       Date:  2011-10       Impact factor: 6.389

4.  Engineering a vascularized collagen-β-tricalcium phosphate graft using an electrochemical approach.

Authors:  Yunqing Kang; Naoto Mochizuki; Ali Khademhosseini; Junji Fukuda; Yunzhi Yang
Journal:  Acta Biomater       Date:  2014-09-28       Impact factor: 8.947

5.  Toward Strong and Tough Glass and Ceramic Scaffolds for Bone Repair.

Authors:  Qiang Fu; Eduardo Saiz; Mohamed N Rahaman; Antoni P Tomsia
Journal:  Adv Funct Mater       Date:  2013-06-13       Impact factor: 18.808

6.  Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering.

Authors:  Solaiman Tarafder; Vamsi Krishna Balla; Neal M Davies; Amit Bandyopadhyay; Susmita Bose
Journal:  J Tissue Eng Regen Med       Date:  2012-03-07       Impact factor: 3.963

Review 7.  Calcium Orthophosphate-Based Bioceramics.

Authors:  Sergey V Dorozhkin
Journal:  Materials (Basel)       Date:  2013-09-06       Impact factor: 3.623

8.  Osteogenic and angiogenic potentials of monocultured and co-cultured human-bone-marrow-derived mesenchymal stem cells and human-umbilical-vein endothelial cells on three-dimensional porous beta-tricalcium phosphate scaffold.

Authors:  Yunqing Kang; Sungwoo Kim; Monica Fahrenholtz; Ali Khademhosseini; Yunzhi Yang
Journal:  Acta Biomater       Date:  2012-08-16       Impact factor: 8.947

9.  The effect of rhBMP-2 and PRP delivery by biodegradable β-tricalcium phosphate scaffolds on new bone formation in a non-through rabbit cranial defect model.

Authors:  Hyun-Pil Lim; Angel E Mercado-Pagan; Kwi-Dug Yun; Seong-Soo Kang; Taek-Hue Choi; Julius Bishop; Jeong-Tae Koh; William Maloney; Kwang-Min Lee; Yunzhi Peter Yang; Sang-Won Park
Journal:  J Mater Sci Mater Med       Date:  2013-06-19       Impact factor: 3.896

10.  The osteogenic differentiation of human bone marrow MSCs on HUVEC-derived ECM and β-TCP scaffold.

Authors:  Yunqing Kang; Sungwoo Kim; Julius Bishop; Ali Khademhosseini; Yunzhi Yang
Journal:  Biomaterials       Date:  2012-07-15       Impact factor: 12.479

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.