Literature DB >> 19280967

A review of dental CAD/CAM: current status and future perspectives from 20 years of experience.

Takashi Miyazaki1, Yasuhiro Hotta, Jun Kunii, Soichi Kuriyama, Yukimichi Tamaki.   

Abstract

In this article, we review the recent history of the development of dental CAD/CAM systems for the fabrication of crowns and fixed partial dentures (FPDs), based on our 20 years of experience in this field. The current status of commercial dental CAD/CAM systems developed around the world is evaluated, with particular focus on the field of ceramic crowns and FPDs. Finally, we discuss the future perspectives applicable to dental CAD/CAM. The use of dental CAD/CAM systems is promising not only in the field of crowns and FPDs but also in other fields of dentistry, even if the contribution is presently limited. CAD/CAM technology will contribute to patients' health and QOL in the aging society.

Entities:  

Mesh：

Substances：

Year:  2009        PMID： 19280967     DOI： 10.4012/dmj.28.44

Source DB:  PubMed          Journal:  Dent Mater J        ISSN： 0287-4547            Impact factor:   2.102


  103 in total

1.  An open CAM system for dentistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and industrial CAM software.

Authors:  Li Lu; Shusheng Liu; Shenggen Shi; Jianzhong Yang
Journal:  J Huazhong Univ Sci Technolog Med Sci       Date:  2011-10-25

2.  Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions.

Authors:  Cristina Zarauz; Arelhys Valverde; Francisco Martinez-Rus; Bassam Hassan; Guillermo Pradies
Journal:  Clin Oral Investig       Date:  2015-09-12       Impact factor: 3.573

3.  Comparison of chairside and laboratory CAD/CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics.

Authors:  Maximilian Kollmuss; Stefan Kist; Julia Eliette Goeke; Reinhard Hickel; Karin Christine Huth
Journal:  Clin Oral Investig       Date:  2015-08-07       Impact factor: 3.573

4.  A new method for the evaluation of the accuracy of full-arch digital impressions in vitro.

Authors:  Jan-Frederik Güth; Daniel Edelhoff; Josef Schweiger; Christine Keul
Journal:  Clin Oral Investig       Date:  2015-10-10       Impact factor: 3.573

5.  Full digital workflow for implant-prosthetic rehabilitations: a case report.

Authors:  L Arcuri; C Lorenzi; F Cecchetti; F Germano; M Spuntarelli; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2016-07-23

Review 6.  Performance of dental ceramics: challenges for improvements.

Authors:  E D Rekow; N R F A Silva; P G Coelho; Y Zhang; P Guess; V P Thompson
Journal:  J Dent Res       Date:  2011-01-11       Impact factor: 6.116

7.  Effect of thermocycling on flexural strength and weibull statistics of machinable glass-ceramic and composite resin.

Authors:  Chaimongkon Peampring; Sasiwimol Sanohkan
Journal:  J Indian Prosthodont Soc       Date:  2013-12-20

8.  The introduction of digital dental technology into BDS curricula.

Authors:  C Chatham; M H Spencer; D J Wood; A Johnson
Journal:  Br Dent J       Date:  2014-12-05       Impact factor: 1.626

Review 9.  Resin-composite blocks for dental CAD/CAM applications.

Authors:  N D Ruse; M J Sadoun
Journal:  J Dent Res       Date:  2014-10-24       Impact factor: 6.116

10.  Survival and success rates of soft-milled cobalt-chromium-ceramic full-arch screw-retained implant-supported prostheses: a 2- to 7-year follow-up retrospective study.

Authors:  S Levartovsky; A Arieli; N Fridenberg; S Matalon; R Pilo
Journal:  Clin Oral Investig       Date:  2021-02-22       Impact factor: 3.573
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.