Literature DB >> 18813392

Perforated membrane method for fabricating three-dimensional polydimethylsiloxane microfluidic devices.

Yiqi Luo1, Richard N Zare.   

Abstract

A procedure is described for making layer-to-layer interconnections in polydimethylsiloxane (PDMS) microfluidic devices. Thin (approximately 50 microm) perforated PDMS membranes are bonded to thicker (0.1 cm or more) PDMS slabs by means of thermally cured PDMS prepolymer to form a three-dimensional (3D) channel structure, which may contain channel or valve arrays that can pass over and under one another. Devices containing as many as two slabs and three perforated membranes are demonstrated. We also present 3D PDMS microfluidic devices for display and for liquid dispensing.

Entities:  

Year:  2008        PMID： 18813392     DOI： 10.1039/b807751g

Source DB:  PubMed          Journal:  Lab Chip        ISSN： 1473-0189            Impact factor:   6.799


  10 in total

1.  Three-dimensional microfluidic devices fabricated in layered paper and tape.

Authors:  Andres W Martinez; Scott T Phillips; George M Whitesides
Journal:  Proc Natl Acad Sci U S A       Date:  2008-12-08       Impact factor: 11.205

2.  Fabrication of freestanding, microperforated membranes and their applications in microfluidics.

Authors:  Yizhe Zheng; Wen Dai; Declan Ryan; Hongkai Wu
Journal:  Biomicrofluidics       Date:  2010-09-27       Impact factor: 2.800

3.  A simple method of fabricating mask-free microfluidic devices for biological analysis.

Authors:  Xin Yi; Rimantas Kodzius; Xiuqing Gong; Kang Xiao; Weijia Wen
Journal:  Biomicrofluidics       Date:  2010-09-07       Impact factor: 2.800

4.  A fluid collection system for dermal wounds in clinical investigations.

Authors:  Michael Klopfer; Derek Banyard; G-P Li; Alan Widgerow; Mark Bachman
Journal:  Biomicrofluidics       Date:  2016-03-22       Impact factor: 2.800

Review 5.  Novel developments in mobile sensing based on the integration of microfluidic devices and smartphones.

Authors:  Ke Yang; Hagit Peretz-Soroka; Yong Liu; Francis Lin
Journal:  Lab Chip       Date:  2016-02-22       Impact factor: 6.799

6.  High yield fabrication of multilayer polydimethylsiloxane [corrected] devices with freestanding micropillar arrays.

Authors:  Christopher W Gregory; Katelyn L Sellgren; Kristin H Gilchrist; Sonia Grego
Journal:  Biomicrofluidics       Date:  2013-10-28       Impact factor: 2.800

Review 7.  Microfluidic approaches for epithelial cell layer culture and characterisation.

Authors:  Roland Thuenauer; Enrique Rodriguez-Boulan; Winfried Römer
Journal:  Analyst       Date:  2014-07-07       Impact factor: 4.616

8.  Large-scale fabrication of free-standing and sub-μm PDMS through-hole membranes.

Authors:  Hai Le-The; Martijn Tibbe; Joshua Loessberg-Zahl; Marciano Palma do Carmo; Marinke van der Helm; Johan Bomer; Albert van den Berg; Anne Leferink; Loes Segerink; Jan Eijkel
Journal:  Nanoscale       Date:  2018-04-26       Impact factor: 7.790

Review 9.  Microfluidic Devices in Advanced Caenorhabditis elegans Research.

Authors:  Muniesh Muthaiyan Shanmugam; Tuhin Subhra Santra
Journal:  Molecules       Date:  2016-08-02       Impact factor: 4.411

10.  Facile Fabrication of Flexible Polymeric Membranes with Micro and Nano Apertures over Large Areas.

Authors:  Kebin Li; Javier Alejandro Hernández-Castro; Keith Morton; Teodor Veres
Journal:  Polymers (Basel)       Date:  2022-10-09       Impact factor: 4.967
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.