Literature DB >> 18683227

Injectable acrylic bone cements for vertebroplasty based on a radiopaque hydroxyapatite. Bioactivity and biocompatibility.

Lidia Hernández1, Juan Parra, Blanca Vázquez, Antonio López Bravo, Francisco Collía, Isabel Goñi, Marilo Gurruchaga, Julio San Román.   

Abstract

Radiopaque bone cements have been formulated to provide injectable pastes with improved bioactivity to be applied in vertebroplasty and kyphoplasty techniques. The bioactive compound was strontium containing hydroxyapatite salt, which was introduced as obtained (SrHA) or after treatment with MMA monomer (SrHA-t). The in vitro bioactivity of the cements was tested in cement films or in cement pastes introduced directly in a simulated body fluid (SBF) solution at 37 degrees C to mimic the in vivo conditions. Precipitation of an apatite-like layer was observed for the 20 wt %-SrHA-t containing cement in the first experiments, and in all formulations in the second ones. The deposited particles were characterized by FTIR spectroscopy and by EDAX analysis. Radiopacity of cements after immersion in SBF was confirmed. The biocompatibility exhibited by the SrHA containing cements was, in some cases, superior to that shown by a formulation with 10 wt % of BaSO(4). The new formulations prepared with the treated filler exhibited the lowest cytotoxicity and enhanced cellular proliferation. The in vivo biocompatibility tested by an intramuscular model in rats indicated the formation of a membrane formed by collagen fibers containing fibroblasts with no inflammatory cells, such as macrophages, giant cells or lymphocytes in all formulations. (c) 2008 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 18683227     DOI: 10.1002/jbm.b.31156

Source DB:  PubMed          Journal:  J Biomed Mater Res B Appl Biomater        ISSN: 1552-4973            Impact factor:   3.368


  7 in total

1.  Effectiveness of a bone substitute (CERAMENT™) as an alternative to PMMA in percutaneous vertebroplasty: 1-year follow-up on clinical outcome.

Authors:  Stefano Marcia; Claudia Boi; Mario Dragani; Stefano Marini; Mariangela Marras; Emanuele Piras; Giovanni Carlo Anselmetti; Salvatore Masala
Journal:  Eur Spine J       Date:  2012-03-21       Impact factor: 3.134

2.  Injectable acrylic bone cements for vertebroplasty based on a radiopaque hydroxyapatite. Formulation and rheological behaviour.

Authors:  L Hernández; M Gurruchaga; I Goñi
Journal:  J Mater Sci Mater Med       Date:  2008-08-14       Impact factor: 3.896

3.  Evaluation of two novel aluminum-free, zinc-based glass polyalkenoate cements as alternatives to PMMA bone cement for use in vertebroplasty and balloon kyphoplasty.

Authors:  Gladius Lewis; Mark R Towler; Daniel Boyd; Matthew J German; Anthony W Wren; Owen M Clarkin; Andrew Yates
Journal:  J Mater Sci Mater Med       Date:  2009-08-05       Impact factor: 3.896

4.  Clinical outcome comparison of polymethylmethacrylate bone cement with and without mineralized collagen modification for osteoporotic vertebral compression fractures.

Authors:  Xi Wang; Jian-Ming Kou; Yang Yue; Xi-Sheng Weng; Zhi-Ye Qiu; Xi-Feng Zhang
Journal:  Medicine (Baltimore)       Date:  2018-09       Impact factor: 1.817

5.  Therapeutic effects of new-type hydraulic delivery vertebroplasty, balloon kyphoplasty and conventional pusher-type vertebroplasty on single segmental osteoporotic vertebral compression fracture.

Authors:  Ping Zhang; Zhi-Hong Zhong; Hao-Tao Yu; Wei Zhou; Jian Li
Journal:  Exp Ther Med       Date:  2018-08-20       Impact factor: 2.447

Review 6.  Bone cements for percutaneous vertebroplasty and balloon kyphoplasty: Current status and future developments.

Authors:  Zhiwei He; Qingpan Zhai; Muli Hu; Chengbin Cao; Jihui Wang; Huilin Yang; Bin Li
Journal:  J Orthop Translat       Date:  2014-12-12       Impact factor: 5.191

7.  Photoluminescent Eu3+-Doped Calcium Phosphate Bone Cement and Its Mechanical Properties.

Authors:  Annemarie Oesterle; Anne V Boehm; Frank A Müller
Journal:  Materials (Basel)       Date:  2018-09-04       Impact factor: 3.623

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.