Literature DB >> 18537279

Adsorption of organic acids on TiO2 nanoparticles: effects of pH, nanoparticle size, and nanoparticle aggregation.

John M Pettibone1, David M Cwiertny, Michelle Scherer, Vicki H Grassian.   

Abstract

In this study, the adsorption of two organic acids, oxalic acid and adipic acid, on TiO2 nanoparticles was investigated at room temperature, 298 K. Solution-phase measurements were used to quantify the extent and reversibility of oxalic acid and adipic acid adsorption on anatase nanoparticles with primary particle sizes of 5 and 32 nm. At all pH values considered, there were minimal differences in measured Langmuir adsorption constants, K ads, or surface-area-normalized maximum adsorbate-surface coverages, Gamma max, between 5 and 32 nm particles. Although macroscopic differences in the reactivity of these organic acids as a function of nanoparticle size were not observed, ATR-FTIR spectroscopy showed some distinct differences in the absorption bands present for oxalic acid adsorbed on 5 nm particles compared to 32 nm particles, suggesting different adsorption sites or a different distribution of adsorption sites for oxalic acid on the 5 nm particles. These results illustrate that molecular-level differences in nanoparticle reactivity can still exist even when macroscopic differences are not observed from solution phase measurements. Our results also allowed the impact of nanoparticle aggregation on acid uptake to be assessed. It is clear that particle aggregation occurs at all pH values and that organic acids can destabilize nanoparticle suspensions. Furthermore, 5 nm particles can form larger aggregates compared to 32 nm particles under the same conditions of pH and solid concentrations. The relative reactivity of 5 and 32 nm particles as determined from Langmuir adsorption parameters did not appear to vary greatly despite differences that occur in nanoparticle aggregation for these two different size nanoparticles. Although this potentially suggests that aggregation does not impact organic acid uptake on anatase particles, these data clearly show that challenges remain in assessing the available surface area for adsorption in nanoparticle aqueous suspensions because of aggregation.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18537279     DOI: 10.1021/la7039916

Source DB:  PubMed          Journal:  Langmuir        ISSN: 0743-7463            Impact factor:   3.882


  15 in total

Review 1.  Characterization of engineered TiO₂ nanomaterials in a life cycle and risk assessments perspective.

Authors:  Véronique Adam; Stéphanie Loyaux-Lawniczak; Gaetana Quaranta
Journal:  Environ Sci Pollut Res Int       Date:  2015-05-22       Impact factor: 4.223

2.  Zirconium-carbon hybrid sorbent for removal of fluoride from water: oxalic acid mediated Zr(IV) assembly and adsorption mechanism.

Authors:  Litza Halla Velazquez-Jimenez; Robert H Hurt; Juan Matos; Jose Rene Rangel-Mendez
Journal:  Environ Sci Technol       Date:  2013-12-31       Impact factor: 9.028

3.  Mapping the surface adsorption forces of nanomaterials in biological systems.

Authors:  Xin R Xia; Nancy A Monteiro-Riviere; Sanjay Mathur; Xuefeng Song; Lisong Xiao; Steven J Oldenberg; Bengt Fadeel; Jim E Riviere
Journal:  ACS Nano       Date:  2011-10-27       Impact factor: 15.881

4.  Influence of siloxane on the transport of ZnO nanoparticles from different release pathways in saturated sand.

Authors:  Sung Hee Joo; Marc Knecht; Chunming Su; Seokju Seo; Randy Lawrence
Journal:  RSC Adv       Date:  2016       Impact factor: 3.361

Review 5.  Titanium dioxide and zinc oxide nanoparticles in sunscreens: focus on their safety and effectiveness.

Authors:  Threes G Smijs; Stanislav Pavel
Journal:  Nanotechnol Sci Appl       Date:  2011-10-13

Review 6.  Metal-Induced Pulmonary Fibrosis.

Authors:  Nour Assad; Akshay Sood; Matthew J Campen; Katherine E Zychowski
Journal:  Curr Environ Health Rep       Date:  2018-12

7.  Application of Multi-Species Microbial Bioassay to Assess the Effects of Engineered Nanoparticles in the Aquatic Environment: Potential of a Luminous Microbial Array for Toxicity Risk Assessment (LumiMARA) on Testing for Surface-Coated Silver Nanoparticles.

Authors:  YounJung Jung; Chang-Beom Park; Youngjun Kim; Sanghun Kim; Stephan Pflugmacher; Seungyun Baik
Journal:  Int J Environ Res Public Health       Date:  2015-07-15       Impact factor: 3.390

8.  Influence of organic molecules on the aggregation of TiO2 nanoparticles in acidic conditions.

Authors:  Karin Danielsson; Julián A Gallego-Urrea; Martin Hassellov; Stefan Gustafsson; Caroline M Jonsson
Journal:  J Nanopart Res       Date:  2017-04-04       Impact factor: 2.253

9.  Manufacturing Nanoparticles with Orthogonally Adjustable Dispersibility in Hydrocarbons, Fluorocarbons, and Water.

Authors:  Lukas Zeininger; Lisa M S Stiegler; Luis Portilla; Marcus Halik; Andreas Hirsch
Journal:  ChemistryOpen       Date:  2018-03-05       Impact factor: 2.911

10.  Properties of residual titanium dioxide nanoparticles after extended periods of mixing and settling in synthetic and natural waters.

Authors:  Chunpeng Zhang; Jenyuk Lohwacharin; Satoshi Takizawa
Journal:  Sci Rep       Date:  2017-08-30       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.