Literature DB >> 18505225

Esthetic restorative materials and opposing enamel wear.

Anna Belsuzarri Olivera1, Márcia Martins Marques.   

Abstract

This in vitro study compared the effects of a gold alloy (Degulor M), four dental ceramics (IPS Empress, IPS Empress 2, Duceram Plus, Duceram LFC) and a laboratory-processed composite (Targis) on the wear of human enamel. The amount of wear of the enamel (dental cusps) and restorative materials (disks) were tested in water at 37 degrees C under standard load (20 N), with a chewing rate of 1.3 Hz and was determined after 150,000 and 300,000 cycles. Before the test, the average surface roughness of the restorative materials was analyzed using the Ra parameter. The results of this study indicate that Targis caused enamel wear similar to Degulor M and resulted in significantly less wear than all the ceramics tested. IPS Empress provoked the greatest amount of enamel wear and Degulor M caused less vertical dimension loss. Targis could be an appropriate alternative material to ceramic, because it is esthetic and produces opposing enamel wear comparable to gold alloy.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18505225     DOI: 10.2341/07-95

Source DB:  PubMed          Journal:  Oper Dent        ISSN: 0361-7734            Impact factor:   2.440


  8 in total

1.  Two-body wear of dental porcelain and substructure oxide ceramics.

Authors:  Martin Rosentritt; Verena Preis; Michael Behr; Sebastian Hahnel; Gerhard Handel; Carola Kolbeck
Journal:  Clin Oral Investig       Date:  2011-07-08       Impact factor: 3.573

2.  Three years in vivo wear: core-ceramic, veneers, and enamel antagonists.

Authors:  Josephine F Esquivel-Upshaw; William F Rose; Allyson A Barrett; Erica R Oliveira; Mark C K Yang; Arthur E Clark; Kenneth J Anusavice
Journal:  Dent Mater       Date:  2012-03-10       Impact factor: 5.304

3.  Fractographic and Microhardness Evaluation of All-Ceramic Hot-Pressed and CAD/CAM Restorations after Hydrothermal Aging.

Authors:  Roxana Diana Vasiliu; Ion-Dragoș Uțu; Lucian Rusu; Adrian Boloș; Liliana Porojan
Journal:  Materials (Basel)       Date:  2022-06-03       Impact factor: 3.748

4.  Influence of light activation of simplified adhesives on the shear bond strength of resin cements to a leucite-reinforced ceramic.

Authors:  Adilson Yoshio Furuse; Cassiana Koch Scotti; Alfredo Llerena-Icochea; Juliana Fraga Soares Bombonatti; Gisele Aihara Haragushiku; Carla Castiglia Gonzaga
Journal:  Eur J Dent       Date:  2018 Jan-Mar

5.  Comparison the degree of enamel wear behavior opposed to Polymer-infiltrated ceramic and feldspathic porcelain.

Authors:  Alireza Hashemi Ashtiani; Mohammad Azizian; Ali Rohani
Journal:  Dent Res J (Isfahan)       Date:  2019 Mar-Apr

6.  The effect of prophylactic polishing pastes on surface roughness of indirect restorative materials.

Authors:  Esra Can Say; Haktan Yurdagüven; Özlem Malkondu; Nimet Ünlü; Mübin Soyman; Ender Kazazoğlu
Journal:  ScientificWorldJournal       Date:  2014-03-03

7.  Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes.

Authors:  Veridiana Resende Novais; Luís Henrique Araújo Raposo; Rafael Resende de Miranda; Camila de Carvalho Almança Lopes; Paulo Cézar Simamoto; Carlos José Soares
Journal:  J Appl Oral Sci       Date:  2017 Jan-Feb       Impact factor: 2.698

8.  Novel methodology for measuring intraoral wear in enamel and dental restorative materials.

Authors:  Josephine F Esquivel-Upshaw; Shu-Min Hsu; Ana C Bohórquez; Nader Abdulhameed; Gary W Scheiffele; Mijin Kim; Dan Neal; John Chai; Fan Ren
Journal:  Clin Exp Dent Res       Date:  2020-09-21
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.