Literature DB >> 18455113

Vertebroplasty comparing injectable calcium phosphate cement compared with polymethylmethacrylate in a unique canine vertebral body large defect model.

Thomas M Turner1, Robert M Urban, Kern Singh, Deborah J Hall, Susan M Renner, Tae-Hong Lim, Michael J Tomlinson, Howard S An.   

Abstract

BACKGROUND CONTEXT: Vertebroplasty was developed to mechanically reinforce weakened vertebral bodies. Polymethylmethacrylate (PMMA) bone cement has been most commonly used but carries risks of thermal injury and respiratory and cardiovascular complications. Calcium phosphate (CaP) offers the potential for biological resorption and replacement with new bone, restoring vertebral body mass and height.
PURPOSE: To compare compressive strength, elastic modulus of the adjacent motion segments, and histologic response of vertebral bodies injected with either CaP or PMMA in a canine vertebroplasty model. STUDY
DESIGN: By using a canine vertebroplasty model, two level vertebroplasties were performed at L1 and L3 and studied for 1 month (n=10) and 6 months (n=10). In each canine, one vertebral defect was randomly injected with either CaP cement (BoneSource; Stryker, Freiberg, Germany) or PMMA.
METHODS: Twenty dogs had an iatrogenically created cavitary lesion at two nonadjacent levels injected with either CaP or PMMA. Canines from each group were tested mechanically (n=5) and histologically (n=5). Histology consisted of axial sections of the L1 and L3 vertebral bodies and high-resolution contact radiographs. Sections from each specimen were embedded in plastic without decalcification to study the bone-cement interface. Bone-cement interfaces were compared for evidence of necrosis, fibrosis, foreign body response, cement resorption, and new bone formation between the PMMA and CaP treatments groups. Mechanical compression testing was performed on specimens from the 1-month (n=5) and 6-month (n=5) time periods. The T13 vertebral body was used as an intact control for the destructive compression testing of L1 and L3. Each vertebral body was compressed to 50% of its original height under displacement control at 15 mm/min to simulate a nontraumatic loading situation. Force and displacement data were recorded in real time.
RESULTS: Vertebral sites containing PMMA were characterized by a thin fibrous membrane. PMMA was detected within the trabeculae, vascular channels, and the spinal canal. Unlike PMMA, CaP underwent resorption and remodeling with vascular invasion and bone ingrowth. Woven and lamellar bone was found on the CaP cement surface, within the remodeled material, and on the surrounding trabeculae. Vertebral body compression strength testing revealed no significant difference in vertebral body height and compressive strength between PMMA and CaP. There was a trend for CaP-treated vertebrae to increase in compressive strength from 1 month to 6 months, whereas PMMA decreased compressive strength when compared with adjacent nontreated vertebrae.
CONCLUSION: For both short and intermediate time periods, the injection of CaP cement can be an effective method to treat large vertebral defects. Early results indicate that CaP remodeling might result in the resorption of the majority of the cement with replacement by lamellar bone.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 18455113     DOI: 10.1016/j.spinee.2006.12.007

Source DB:  PubMed          Journal:  Spine J        ISSN: 1529-9430            Impact factor:   4.166


  17 in total

1.  Treatment of typical amyelic somatic fractures with kyphoplasty and calcium phosphate cement: a critical analysis.

Authors:  G Gioia; D Mandelli; R Gogue
Journal:  Eur Spine J       Date:  2012-03-10       Impact factor: 3.134

2.  Demineralization after balloon kyphoplasty with calcium phosphate cement: a histological evaluation in ten patients.

Authors:  Rainer Gumpert; Koppany Bodo; Ekkehard Spuller; Thomas Poglitsch; Ronny Bindl; Anita Ignatius; Paul Puchwein
Journal:  Eur Spine J       Date:  2014-02-25       Impact factor: 3.134

3.  Biomechanical, histological and histomorphometric analyses of calcium phosphate cement compared to PMMA for vertebral augmentation in a validated animal model.

Authors:  Luis Alvarez Galovich; Antonio Perez-Higueras; Jose R Altonaga; José Manuel Gonzalo Orden; Maria Lluisa Mariñoso Barba; Maria Teresa Carrascal Morillo
Journal:  Eur Spine J       Date:  2011-07-20       Impact factor: 3.134

4.  Comparison of failure mechanisms for cements used in skeletal luting applications.

Authors:  O Clarkin; D Boyd; M R Towler
Journal:  J Mater Sci Mater Med       Date:  2009-03-13       Impact factor: 3.896

5.  Effects of cement augmentation on the mechanical stability of multilevel spine after vertebral compression fracture.

Authors:  Eelin Tan; Tian Wang; Matthew H Pelletier; William R Walsh
Journal:  J Spine Surg       Date:  2016-06

6.  Semiautomated Longitudinal Microcomputed Tomography-based Quantitative Structural Analysis of a Nude Rat Osteoporosis-related Vertebral Fracture Model.

Authors:  Galina Shapiro; Maxim Bez; Wafa Tawackoli; Zulma Gazit; Dan Gazit; Gadi Pelled
Journal:  J Vis Exp       Date:  2017-09-28       Impact factor: 1.355

7.  Severe kyphotic deformity resulting from collapses of cemented and adjacent vertebrae following percutaneous vertebroplasty using calcium phosphate cement. A case report.

Authors:  Toshitaka Yoshii; Hiroko Ueki; Tsuyoshi Kato; Shoji Tomizawa; Atsushi Okawa
Journal:  Skeletal Radiol       Date:  2014-06-01       Impact factor: 2.199

8.  Differential blood contamination levels and powder-liquid ratios can affect the compressive strength of calcium phosphate cement (CPC): a study using a transpedicular vertebroplasty model.

Authors:  Katsuhito Kiyasu; Ryuichi Takemasa; Masahiko Ikeuchi; Toshikazu Tani
Journal:  Eur Spine J       Date:  2013-05-04       Impact factor: 3.134

9.  PTH Induces Systemically Administered Mesenchymal Stem Cells to Migrate to and Regenerate Spine Injuries.

Authors:  Dmitriy Sheyn; Galina Shapiro; Wafa Tawackoli; Douk Soo Jun; Youngdo Koh; Kyu Bok Kang; Susan Su; Xiaoyu Da; Shiran Ben-David; Maxim Bez; Eran Yalon; Ben Antebi; Pablo Avalos; Tomer Stern; Elazar Zelzer; Edward M Schwarz; Zulma Gazit; Gadi Pelled; Hyun M Bae; Dan Gazit
Journal:  Mol Ther       Date:  2015-11-20       Impact factor: 11.454

10.  Cement leakage causes potential thermal injury in vertebroplasty.

Authors:  Po-Liang Lai; Ching-Lung Tai; Lih-Huei Chen; Nai-Yuan Nien
Journal:  BMC Musculoskelet Disord       Date:  2011-05-26       Impact factor: 2.362

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.