INTRODUCTION: The complex anatomy of the left atrium (LA) makes location of ablation catheters difficult using fluoroscopy alone, and therefore 3D mapping systems are now routinely used. We describe the integration of a CT image into the EnSite NavX System with Fusion and its validation in patients undergoing atrial fibrillation (AF) or left atrial tachycardia (AT) catheter ablation. METHODS AND RESULTS:Twenty-three patients (61 +/- 9.2 years, 16 male) with paroxysmal (14) and persistent (8) AF and persistent (1) AT underwent ablation using CT image integration into the EnSite NavX mapping system with the EnSite Fusion Dynamic Registration software module. In all cases, segmentation of the CT data was accomplished using the EnSite Verismo segmentation tool, although repeat segmentation attempts were required in seven cases. The CT was registered with the NavX-created geometry using an average of 24 user-defined fiducial pairs (range 9 to 48). The average distance from NavX-measured lesion positions to the CT surface was 3.2 +/- 0.9 mm (median 2.4 mm). A large, automated, retrospective test using registrations with random subsets of each patient's fiducial pairs showed this average distance decreasing as the number of fiducial pairs increased, although the improvement ceased to be significant beyond 15 pairs. In confirmation, those studies which had used 16 or more pairs had a smaller average lesion-to-surface distance (2.9 +/- 0.7 mm) than those using 15 or fewer (4.3 +/- 0.8 mm, P < 0.02). Finally, for the 13 patients who underwent left atrial circumferential ablation (LACA), there was no significant difference between the circumference computed using NavX-measured positions and CT surface positions for either the left pulmonary veins (178 +/- 64 vs. 177 +/- 60 mm; P = 0.81) or the right pulmonary veins (218 +/- 86 vs. 207 +/- 81 mm; P = 0.08). CONCLUSION: CT image integration into the EnSite NavX Fusion system was successful in all patients undergoing catheter ablation. A learning curve exists for the Verismo segmentation tool; but once the 3D model was created, the registration process was easily accomplished, with a registration error that is comparable with registration errors using other mapping systems with CT image integration. All patients went on to have subsequent successful ablation procedures. Where LACA was performed (13 patients), only four patients required segmental ostial lesions to achieve electrical isolation.
RCT Entities:
INTRODUCTION: The complex anatomy of the left atrium (LA) makes location of ablation catheters difficult using fluoroscopy alone, and therefore 3D mapping systems are now routinely used. We describe the integration of a CT image into the EnSite NavX System with Fusion and its validation in patients undergoing atrial fibrillation (AF) or left atrial tachycardia (AT) catheter ablation. METHODS AND RESULTS: Twenty-three patients (61 +/- 9.2 years, 16 male) with paroxysmal (14) and persistent (8) AF and persistent (1) AT underwent ablation using CT image integration into the EnSite NavX mapping system with the EnSite Fusion Dynamic Registration software module. In all cases, segmentation of the CT data was accomplished using the EnSite Verismo segmentation tool, although repeat segmentation attempts were required in seven cases. The CT was registered with the NavX-created geometry using an average of 24 user-defined fiducial pairs (range 9 to 48). The average distance from NavX-measured lesion positions to the CT surface was 3.2 +/- 0.9 mm (median 2.4 mm). A large, automated, retrospective test using registrations with random subsets of each patient's fiducial pairs showed this average distance decreasing as the number of fiducial pairs increased, although the improvement ceased to be significant beyond 15 pairs. In confirmation, those studies which had used 16 or more pairs had a smaller average lesion-to-surface distance (2.9 +/- 0.7 mm) than those using 15 or fewer (4.3 +/- 0.8 mm, P < 0.02). Finally, for the 13 patients who underwent left atrial circumferential ablation (LACA), there was no significant difference between the circumference computed using NavX-measured positions and CT surface positions for either the left pulmonary veins (178 +/- 64 vs. 177 +/- 60 mm; P = 0.81) or the right pulmonary veins (218 +/- 86 vs. 207 +/- 81 mm; P = 0.08). CONCLUSION: CT image integration into the EnSite NavX Fusion system was successful in all patients undergoing catheter ablation. A learning curve exists for the Verismo segmentation tool; but once the 3D model was created, the registration process was easily accomplished, with a registration error that is comparable with registration errors using other mapping systems with CT image integration. All patients went on to have subsequent successful ablation procedures. Where LACA was performed (13 patients), only four patients required segmental ostial lesions to achieve electrical isolation.
Authors: Maryam E Rettmann; David R Holmes; David M Kwartowitz; Mia Gunawan; Susan B Johnson; Jon J Camp; Bruce M Cameron; Charles Dalegrave; Mark W Kolasa; Douglas L Packer; Richard A Robb Journal: Med Phys Date: 2014-02 Impact factor: 4.071
Authors: Jiquan Liu; Maryam E Rettmann; David R Holmes; Huilong Duan; Richard A Robb Journal: Comput Med Imaging Graph Date: 2011-03-03 Impact factor: 4.790
Authors: Roberto De Ponti; Raffaella Marazzi; Domenico Lumia; Giuseppe Picciolo; Roberto Biddau; Carlo Fugazzola; Jorge A Salerno-Uriarte Journal: World J Cardiol Date: 2010-08-26