OBJECTIVE: To determine whether an amorphous calcium phosphate (ACP)-containing adhesive has an acceptable level of shear bond strength to be used as an orthodontic adhesive. MATERIALS AND METHODS: Sixty extracted premolars were randomly divided into three groups for orthodontic bonding. Group 1 used a composite resin adhesive (Transbond XT), group 2 was bonded with an ACP-containing adhesive (Aegis Ortho), and group 3 used a resin-modified glass ionomer (Fuji Ortho LC). All bonded teeth were stored in distilled water at 37 degrees C for 40 +/- 2 hours prior to debonding. Shear bond strength and adhesive remnant index (ARI) were recorded for each specimen. RESULTS: The mean shear bond strengths for the three test groups were: group 1 (15.2 +/- 3.6 MPa), group 2 (6.6 +/- 1.5 MPa), and group 3 (8.3 +/- 2.8 MPa). A one-way analysis of variance showed a significant difference in bond strengths between the groups. A post hoc Tukey test showed group 1 to be significantly (P < .001) greater than groups 2 and 3. A Kruskal-Wallis test and a Mann-Whitney U-test showed groups 1 and 3 exhibited lower ARI scores than group 2, but a majority of specimens in each group had greater than 50% of the cement removed along with the bracket during debonding. CONCLUSIONS: The ACP-containing adhesive demonstrated a low, but satisfactory bond strength needed to function as an orthodontic adhesive.
OBJECTIVE: To determine whether an amorphous calcium phosphate (ACP)-containing adhesive has an acceptable level of shear bond strength to be used as an orthodontic adhesive. MATERIALS AND METHODS: Sixty extracted premolars were randomly divided into three groups for orthodontic bonding. Group 1 used a composite resin adhesive (Transbond XT), group 2 was bonded with an ACP-containing adhesive (Aegis Ortho), and group 3 used a resin-modified glass ionomer (Fuji Ortho LC). All bonded teeth were stored in distilled water at 37 degrees C for 40 +/- 2 hours prior to debonding. Shear bond strength and adhesive remnant index (ARI) were recorded for each specimen. RESULTS: The mean shear bond strengths for the three test groups were: group 1 (15.2 +/- 3.6 MPa), group 2 (6.6 +/- 1.5 MPa), and group 3 (8.3 +/- 2.8 MPa). A one-way analysis of variance showed a significant difference in bond strengths between the groups. A post hoc Tukey test showed group 1 to be significantly (P < .001) greater than groups 2 and 3. A Kruskal-Wallis test and a Mann-Whitney U-test showed groups 1 and 3 exhibited lower ARI scores than group 2, but a majority of specimens in each group had greater than 50% of the cement removed along with the bracket during debonding. CONCLUSIONS: The ACP-containing adhesive demonstrated a low, but satisfactory bond strength needed to function as an orthodontic adhesive.
Authors: Melissa L Brown; Harry B Davis; Eser Tufekci; Jennifer J Crowe; David A Covell; John C Mitchell Journal: Angle Orthod Date: 2011-11 Impact factor: 2.079