Literature DB >> 18200886

Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste.

Clyde V Owens1, Christy Lambright, Kathy Bobseine, Bryce Ryan, L Earl Gray, Brian K Gullett, Vickie S Wilson.   

Abstract

Rapid changes in technology have brought about a surge in demand for electronic equipment. Many of these products contain brominated flame-retardants (BFRs) as additives to decrease the rate of combustion, raising concerns about their toxicological risk. In our study, emissions from the combustion of computer-printed circuit boards were evaluated in the T47D-KBluc estrogen-responsive cell line at a series of concentrations. There was significant activity from the emission extract when compared to the positive control, 0.1 nM estradiol. After HPLC fractionation, GC/MS identified ten chemicals which included bisphenol A; the brominated derivates mono-, di-, and tribisphenol, triphenyl phosphate, triphenyl phosphine oxide, 4'-bromo-[1,1'-biphenyl]-4-ol,3,5-dibromo-4-hydroxybiphenyl,3,5-dibromo-2-hydroxybiphenyl, and the oxygenated polyaromatic hydrocarbon benzanthrone. Commercially available samples of these ten compounds were tested. The compound 4'-bromo-[1,1'-biphenyl]-4-ol resulted in dose-dependent significant increases for luciferase activity at concentrations ranging from 0.1 to 10 microM in the T47D-KBluc assay. The chemical also demonstrated an affinity for binding to the estrogen receptor (ER) with an IC50 of 2 x 10(-7) M. To determine the uterotrophic activity, three doses (50, 100, and 200 mg/kg/day) of 4'-bromo-[1,1'-biphenyl]-4-ol were administered to adult ovariectomized Long-Evans rats for 3 days. Treatment of the animals with 200 mg/ kg/day showed an increase in uterine weight Hence one new chemical, released by burning of electrical wastes, was identified which displays estrogenic activity both in vitro and in vivo. However, it was about 1000-fold less potent than ethynyl estradiol.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 18200886     DOI: 10.1021/es071425p

Source DB:  PubMed          Journal:  Environ Sci Technol        ISSN: 0013-936X            Impact factor:   9.028


  6 in total

1.  Comparative assessment of metallurgical recovery of metals from electronic waste with special emphasis on bioleaching.

Authors:  Anshu Priya; Subrata Hait
Journal:  Environ Sci Pollut Res Int       Date:  2017-01-14       Impact factor: 4.223

Review 2.  Electronic Waste Recycling: Occupational Exposures and Work-Related Health Effects.

Authors:  J O Okeme; V H Arrandale
Journal:  Curr Environ Health Rep       Date:  2019-12

3.  Toxicology in the fast lane: application of high-throughput bioassays to detect modulation of key enzymes and receptors.

Authors:  Christophe Morisseau; Oleg Merzlikin; Amy Lin; Guochun He; Wei Feng; Isela Padilla; Michael S Denison; Isaac N Pessah; Bruce D Hammock
Journal:  Environ Health Perspect       Date:  2009-07-31       Impact factor: 9.031

4.  Bioleaching: urban mining option to curb the menace of E-waste challenge.

Authors:  Shashi Arya; Sunil Kumar
Journal:  Bioengineered       Date:  2020-01-01       Impact factor: 3.269

Review 5.  A review of the recycling of non-metallic fractions of printed circuit boards.

Authors:  André Canal Marques; José-María Cabrera Marrero; Célia de Fraga Malfatti
Journal:  Springerplus       Date:  2013-10-09

Review 6.  Global Assessment of Bisphenol A in the Environment: Review and Analysis of Its Occurrence and Bioaccumulation.

Authors:  Jone Corrales; Lauren A Kristofco; W Baylor Steele; Brian S Yates; Christopher S Breed; E Spencer Williams; Bryan W Brooks
Journal:  Dose Response       Date:  2015-07-29       Impact factor: 2.658

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.