Literature DB >> 18196417

Retroacetabular stress-shielding in THA.

Rocco P Pitto1, Akanksha Bhargava, Salil Pandit, Jacob T Munro.   

Abstract

We conducted a randomized clinical trial to compare periacetabular bone density changes after total hip arthroplasty using press-fit components with soft and hard liner materials. Bone density changes were assessed using quantitative computed tomography-assisted osteodensitometry. Twenty press-fit cups with alumina ceramic liners and 20 press-fit cups with highly cross-linked polyethylene liners were included; the nonoperated contralateral side was used as the control. Computed tomography scans were performed postoperatively and 1 year after the index operation. At the 1-year followup, we found no differences of periacetabular bone density changes between the alumina and polyethylene liner cohorts. However, we observed marked periacetabular cancellous bone density loss (up to -34%) in both cohorts. In contrast, we observed only moderate cortical bone density changes. The decrease of periacetabular cancellous bone density with retention of cortical bone density after THA suggests stress transfer to the cortical bone.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18196417      PMCID: PMC2505128          DOI: 10.1007/s11999-007-0043-0

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  21 in total

1.  Bone density adjacent to press-fit acetabular components. A prospective analysis with quantitative computed tomography.

Authors:  J M Wright; P M Pellicci; E A Salvati; B Ghelman; M M Roberts; J L Koh
Journal:  J Bone Joint Surg Am       Date:  2001-04       Impact factor: 5.284

2.  A computed tomography assessment of femoral and acetabular bone changes after total hip arthroplasty.

Authors:  R Schmidt; L Muller; A Kress; H Hirschfelder; A Aplas; R P Pitto
Journal:  Int Orthop       Date:  2002-06-28       Impact factor: 3.075

Review 3.  Quantitative computer-assisted osteodensitometry in total hip arthroplasty.

Authors:  R P Pitto; L A Mueller; K Reilly; R Schmidt; J Munro
Journal:  Int Orthop       Date:  2006-10-17       Impact factor: 3.075

4.  Finite element analysis of acetabular reconstruction. Noncemented threaded cups.

Authors:  R Huiskes
Journal:  Acta Orthop Scand       Date:  1987-12

5.  Changes in trabecular pattern of the upper end of the femur as an index of osteoporosis.

Authors:  M Singh; A R Nagrath; P S Maini
Journal:  J Bone Joint Surg Am       Date:  1970-04       Impact factor: 5.284

6.  An axisymmetric model of acetabular components in total hip arthroplasty.

Authors:  D R Pedersen; R D Crowninshield; R A Brand; R C Johnston
Journal:  J Biomech       Date:  1982       Impact factor: 2.712

7.  The accuracy and reproducibility of radiographic assessment of stress-shielding. A postmortem analysis.

Authors:  C A Engh; J P McAuley; C J Sychterz; M E Sacco; C A Engh
Journal:  J Bone Joint Surg Am       Date:  2000-10       Impact factor: 5.284

8.  Uncemented acetabular components with polyethylene or alumina liners.

Authors:  Rainer Schmidt; Gerd Willmann; Rocco Paolo Pitto
Journal:  Int Orthop       Date:  2003-01-28       Impact factor: 3.075

9.  Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies.

Authors:  Marco Viceconti; Mario Davinelli; Fulvia Taddei; Angelo Cappello
Journal:  J Biomech       Date:  2004-10       Impact factor: 2.712

10.  Adaptive bone remodeling and biomechanical design considerations for noncemented total hip arthroplasty.

Authors:  R Huiskes; H Weinans; M Dalstra
Journal:  Orthopedics       Date:  1989-09       Impact factor: 1.390

View more
  5 in total

1.  High survival in young patients using a second generation uncemented total hip replacement.

Authors:  Marcus R Streit; Kerstin Schröder; Matthias Körber; Christian Merle; Tobias Gotterbarm; Volker Ewerbeck; Peter R Aldinger
Journal:  Int Orthop       Date:  2011-11-24       Impact factor: 3.075

Review 2.  Do outcomes reported in randomised controlled trials of joint replacement surgery fulfil the OMERACT 2.0 Filter? A review of the 2008 and 2013 literature.

Authors:  Peter D H Wall; Bethan L Richards; Andrew Sprowson; Rachelle Buchbinder; Jasvinder A Singh
Journal:  Syst Rev       Date:  2017-05-30

3.  Peri-acetabular bone mineral densityin total hip replacement.

Authors:  L Gauthier; L Dinh; P E Beaulé
Journal:  Bone Joint Res       Date:  2013-08-02       Impact factor: 5.853

4.  Cancellous and cortical bone mineral density around an elastic press-fit socket in total hip arthroplasty.

Authors:  Dean F M Pakvis; Petra J C Heesterbeek; Marianne Severens; Maarten Spruit
Journal:  Acta Orthop       Date:  2016-09-23       Impact factor: 3.717

5.  An investigation of the mechanical and microstructural evolution of a TiNbZr alloy with varied ageing time.

Authors:  Arne Biesiekierski; Jixing Lin; Khurram Munir; Sertan Ozan; Yuncang Li; Cuie Wen
Journal:  Sci Rep       Date:  2018-04-10       Impact factor: 4.379

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.