Literature DB >> 1791553

The effect of oxidation heat treatment of porcelain bond strength in selected base metal alloys.

Y Wu1, J B Moser, L M Jameson, W F Malone.   

Abstract

Base metal alloys have been widely used for fixed partial dentures in the past decade. The oxidation heat treatment (degassing) of these alloys is a controversial step to prepare the metal surface for bonding porcelain. This study evaluated the effect of oxidation heat treatment on the porcelain bond strength of base metal alloys and investigated composition changes that may have occurred during this process.

Entities:  

Mesh：

Substances：

Year:  1991        PMID： 1791553     DOI： 10.1016/0022-3913(91)90502-n

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  9 in total

1.  Study on the Surface of Cobalt-Chromium Dental Alloys and Their Behavior in Oral Cavity as Cast Materials.

Authors:  Willi Andrei Uriciuc; Adina Bianca Boșca; Anida-Maria Băbțan; Horațiu Vermeșan; Cecilia Cristea; Mihaela Tertiș; Petru Pășcuță; Gheorghe Borodi; Maria Suciu; Lucian Barbu-Tudoran; Cătălin Ovidiu Popa; Aranka Ilea
Journal:  Materials (Basel)       Date:  2022-04-22       Impact factor: 3.748

2.  X-ray diffraction characterization of dental gold alloy-ceramic interfaces.

Authors:  Z Cai; I Watanabe; J C Mitchell; W A Brantley; T Okabe
Journal:  J Mater Sci Mater Med       Date:  2001-03       Impact factor: 3.896

3.  Fracture behavior of metal-ceramic fixed dental prostheses with frameworks from cast or a newly developed sintered cobalt-chromium alloy.

Authors:  Klaus-Peter Krug; Andreas W Knauber; Frank P Nothdurft
Journal:  Clin Oral Investig       Date:  2014-03-26       Impact factor: 3.573

4.  Comparative evaluation of marginal fit and axial wall adaptability of copings fabricated by metal laser sintering and lost-wax technique: An in vitro study.

Authors:  Bhushan Satish Gaikwad; Girish Nazirkar; Rajani Dable; Shailendra Singh
Journal:  J Indian Prosthodont Soc       Date:  2018 Jan-Mar

5.  Evaluation and comparison of shear bond strength of porcelain to a beryllium-free alloy of nickel-chromium, nickel and beryllium free alloy of cobalt-chromium, and titanium: An in vitro study.

Authors:  Ananya Singh; Keerthi Ramachandra; Achut R Devarhubli
Journal:  J Indian Prosthodont Soc       Date:  2017 Jul-Sep

6.  Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings.

Authors:  Myung-Joo Kim; Yun-Jung Choi; Seong-Kyun Kim; Seong-Joo Heo; Jai-Young Koak
Journal:  Materials (Basel)       Date:  2017-01-23       Impact factor: 3.623

7.  Interfacial analysis of porcelain fused to high-palladium alloy with different observation methods.

Authors:  Hao-Sheng Chang; Chao-Sen Yang; Yao-Dung Hsieh; Ming Chen
Journal:  J Dent Sci       Date:  2016-01-05       Impact factor: 2.080

8.  Oxide layer characteristics and interfacial analysis of porcelain fused to high-gold alloy using multitechnique analysis methods.

Authors:  Hao-Sheng Chang; Yu-Chun Chiu; Chao-Sen Yang; Ming Chen
Journal:  J Dent Sci       Date:  2017-04-04       Impact factor: 2.080

9.  Effect of metal conditioner on bonding of porcelain to cobalt-chromium alloy.

Authors:  Yoshito Minesaki; Sadaaki Murahara; Yutaro Kajihara; Yoshihisa Takenouchi; Takuo Tanaka; Shiro Suzuki; Hiroyuki Minami
Journal:  J Adv Prosthodont       Date:  2016-02-23       Impact factor: 1.904
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.