Literature DB >> 1791552

Variables affecting the spectral transmittance of light through porcelain veneer samples.

K L O'Keefe1, P L Pease, H K Herrin.   

Abstract

The spectral transmittance of porcelain laminate veneers was measured at three different thicknesses (0.50, 0.75, and 1 mm) and three different opacities (25%, 75%, and 100%). The results indicated that the thickness of the porcelain veneer was the primary factor affecting light transmission and not the opacity. The measured values of transmittance were then used to estimate the setting time for light-cured luting agents of a porcelain veneer.

Mesh:

Substances:

Year:  1991        PMID: 1791552     DOI: 10.1016/0022-3913(91)90501-m

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  9 in total

1.  Influence of curing light attenuation caused by aesthetic indirect restorative materials on resin cement polymerization.

Authors:  Bárbara Pick; Carla Castiglia Gonzaga; Washington Steagall Junior; Yoshio Kawano; Roberto Ruggiero Braga; Paulo Eduardo Capel Cardoso
Journal:  Eur J Dent       Date:  2010-07

2.  Curing efficiency of various resin-based materials polymerized through different ceramic thicknesses and curing time.

Authors:  Jung-Won Lee; Hyun-Suk Cha; Joo-Hee Lee
Journal:  J Adv Prosthodont       Date:  2011-09-25       Impact factor: 1.904

3.  Comparison of light transmittance in different thicknesses of zirconia under various light curing units.

Authors:  Isil Cekic-Nagas; Ferhan Egilmez; Gulfem Ergun
Journal:  J Adv Prosthodont       Date:  2012-05-30       Impact factor: 1.904

4.  Light transmittance and surface roughness of a feldspathic ceramic CAD-CAM material as a function of different surface treatments.

Authors:  Çağrı Ural; İbrahim Duran; Betül Evmek; İdris Kavut; Seda Cengiz; Emir Yuzbasioglu
Journal:  BMC Oral Health       Date:  2016-07-15       Impact factor: 2.757

5.  Curing efficiency of dual-cure resin cement under zirconia with two different light curing units.

Authors:  Pınar Gultekin; Elif Pak Tunc; Deger Ongul; Volkan Turp; Ozgur Bultan; Burcin Karataslı
Journal:  J Istanb Univ Fac Dent       Date:  2015-04-29

Review 6.  Translucency of Dental Ceramic, Post and Bracket.

Authors:  Yong-Keun Lee
Journal:  Materials (Basel)       Date:  2015-10-28       Impact factor: 3.623

7.  Effects of staining liquids and finishing methods on translucency of a hybrid ceramic material having two different translucency levels.

Authors:  Sebnem Ulviye Buyukkaplan; Mehmet Mustafa Özarslan; Çağatay Barutcigil; Merve Arslan; Kubilay Barutcigil; Elif Ece Yoldan
Journal:  J Adv Prosthodont       Date:  2017-10-16       Impact factor: 1.904

8.  Influence of Varying Dentin and Enamel Layer Thicknesses of Nano-Composite Resins on Color Match between Lithium Disilicate Dental Ceramic and Composite Resins.

Authors:  Elmira Saati Khosroshahi; Elmira Jafari Navimipour; Fatemeh Pournaghi Azar; Mehdi Abed-Kahnamoui; Mahmoud Bahari
Journal:  Front Dent       Date:  2021-04-12

9.  Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics.

Authors:  Hee-Kyung Kim; Sung-Hun Kim; Jai-Bong Lee; Jung-Suk Han; In-Sung Yeo; Seung-Ryong Ha
Journal:  J Adv Prosthodont       Date:  2016-02-23       Impact factor: 1.904

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.