In situ chemical reduction of Cr(VI) in groundwater using a combination of ferrous sulfate and sodium dithionite: a field investigation.

A field study was conducted to evaluate the performance of a ferrous iron based in situ redox zone for the treatment of a dissolved phase Cr(VI) plume at a former industrial site. The ferrous iron based in situ redox zone was created by injecting a blend of 0.2 M ferrous sulfate and 0.2 M sodium dithionite into the path of a dissolved Cr(VI) plume within a shallow medium to fine sand unconfined aquifer formation. Monitoring data collected over a period of 1020 days after more than 100 m of linear groundwater flow through the treatment zone indicated sustained treatment of dissolved phase Cr(VI) from initial concentrations between 4 and 8 mg/L to less than 0.015 mg/L. Sustained treatment is assumed to be primarily due to the reduction of Cr(VI) to Cr(III) by ferrous iron adsorbed to, precipitated on, and/or incorporated into aquifer iron (hydr)oxide solid surfaces within the treatment zone. Precipitated phases likely include FeCO3 and FeS based on saturation index considerations and SEM/EDS analysis. The detection of solid phase sulfites and thiosulfates in aquifer sediments collected from the treatment zone more than 2 years following injection suggests dithionite decomposition products may also play a significant role in the long-term treatment of the dissolved phase Cr(VI).