Literature DB >> 17701312

Antibacterial activity of chitosan-based matrices on oral pathogens.

Aparna R Sarasam1, Phoebe Brown, Sharukh S Khajotia, John J Dmytryk, Sundararajan V Madihally.   

Abstract

Chitosan is a well sought-after polysaccharide in biomedical applications due to its biocompatibility, biodegradability to non-toxic substances, and ease of fabrication into various configurations. However, alterations in the anti-bacterial properties of chitosan in various forms is not completely understood. The objective of this study was to evaluate the anti-bacterial properties of chitosan matrices in different configurations against two pathogens-Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans. Two-dimensional (2-D) membranes and three-dimensional (3-D) porous scaffolds were synthesized by air drying and controlled-rate freeze drying. Matrices were suspended in bacterial broths with or without lysozyme (enzyme that degrades chitosan). Influences of pore size, blending with Polycaprolactone (PCL, a synthetic polymer), and neutralization process on bacterial proliferation were studied. Transient changes in optical density of the broth, adhesion characteristics, viability, and contact-dependent bacterial activity were assessed. 3-D porous scaffolds were more effective in reducing the proliferation of S. mutans in suspension than 2-D membranes. However, no significant differences were observed on the proliferation of A. actinomycetemcomitans. Presence of lysozyme significantly increased the antibacterial activity of chitosan against A. actinomycetemcomitans. Pore size did not affect the proliferation kinetics of either species, with or without lysozyme. NaOH neutralization of chitosan increased bacterial adhesion whereas ethanol neutralization inhibited adhesion without lowering proliferation. Mat culture tests indicated that chitosan does not allow proliferation on its surface and it loses antibacterial activity upon blending with PCL. Results suggest that the chemical and structural characteristics of chitosan-based matrices can be manipulated to influence the interaction of different bacterial species.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17701312     DOI: 10.1007/s10856-007-3072-z

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  36 in total

1.  Comparison of physicochemical, binding, and antibacterial properties of chitosans prepared without and with deproteinization process.

Authors:  Hong Kyoon No; Shin Ho Lee; Na Young Park; Samuel P Meyers
Journal:  J Agric Food Chem       Date:  2003-12-17       Impact factor: 5.279

2.  Effects of chitosan nonwoven membrane on periodontal healing of surgically created one-wall intrabony defects in beagle dogs.

Authors:  Young-Ju Yeo; Dong-Won Jeon; Chang-Sung Kim; Seong-Ho Choi; Kyoo-Sung Cho; Yong-Keun Lee; Chong-Kwan Kim
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2005-01-15       Impact factor: 3.368

Review 3.  Designing materials for biology and medicine.

Authors:  Robert Langer; David A Tirrell
Journal:  Nature       Date:  2004-04-01       Impact factor: 49.962

Review 4.  Periodontal surgery. Resection to regeneration.

Authors:  G Richard Young
Journal:  Dent Today       Date:  2003-12

Review 5.  The application of bone morphogenetic proteins to dental tissue engineering.

Authors:  Misako Nakashima; A Hari Reddi
Journal:  Nat Biotechnol       Date:  2003-09       Impact factor: 54.908

6.  In vitro antimicrobial activity of a chitooligosaccharide mixture against Actinobacillus actinomycetemcomitans and Streptococcus mutans.

Authors:  B K Choi; K Y Kim; Y J Yoo; S J Oh; J H Choi; C Y Kim
Journal:  Int J Antimicrob Agents       Date:  2001-12       Impact factor: 5.283

7.  Characterization of chitosan-polycaprolactone blends for tissue engineering applications.

Authors:  Aparna Sarasam; Sundararajan V Madihally
Journal:  Biomaterials       Date:  2005-09       Impact factor: 12.479

8.  Blending chitosan with polycaprolactone: effects on physicochemical and antibacterial properties.

Authors:  Aparna R Sarasam; Raj K Krishnaswamy; Sundararajan V Madihally
Journal:  Biomacromolecules       Date:  2006-04       Impact factor: 6.988

9.  The resistance of polyvinylpyrrolidone-iodine-poly(-caprolactone) blends to adherence of Escherichia coli.

Authors:  David S Jones; Jasmina Djokic; Sean P Gorman
Journal:  Biomaterials       Date:  2005-05       Impact factor: 12.479

10.  Factors influencing the outcome of regenerative therapy in mandibular Class II furcations: Part I.

Authors:  Gerald M Bowers; Robert G Schallhorn; Pamela K McClain; Grace M Morrison; Rose Morgan; Mark A Reynolds
Journal:  J Periodontol       Date:  2003-09       Impact factor: 6.993

View more
  14 in total

1.  Antibiotic-loaded chitosan-Laponite films for local drug delivery by titanium implants: cell proliferation and drug release studies.

Authors:  Farideh Ordikhani; Mehdi Dehghani; Arash Simchi
Journal:  J Mater Sci Mater Med       Date:  2015-10-27       Impact factor: 3.896

2.  Feasibility of improving platelet-rich plasma therapy by using chitosan with high platelet activation ability.

Authors:  Hidemi Hattori; Masayuki Ishihara
Journal:  Exp Ther Med       Date:  2017-01-13       Impact factor: 2.447

3.  Dual antibacterial agents of nano-silver and 12-methacryloyloxydodecylpyridinium bromide in dental adhesive to inhibit caries.

Authors:  Ke Zhang; Fang Li; Satoshi Imazato; Lei Cheng; Huaibing Liu; Dwayne D Arola; Yuxing Bai; Hockin H K Xu
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2013-03-26       Impact factor: 3.368

4.  Anti-fibronectin aptamers improve the colonization of chitosan films modified with D-(+) Raffinose by murine osteoblastic cells.

Authors:  L Parisi; C Galli; A Bianchera; P Lagonegro; L Elviri; A Smerieri; S Lumetti; E Manfredi; R Bettini; G M Macaluso
Journal:  J Mater Sci Mater Med       Date:  2017-07-31       Impact factor: 3.896

5.  Preparation and properties of a drug release membrane of mitomycin C with N-succinyl-hydroxyethyl chitosan.

Authors:  Minyu Li; Baoqin Han; Wanshun Liu
Journal:  J Mater Sci Mater Med       Date:  2011-11-18       Impact factor: 3.896

6.  Evaluation of antibacterial and remineralizing nanocomposite and adhesive in rat tooth cavity model.

Authors:  Fang Li; Ping Wang; Michael D Weir; Ashraf F Fouad; Hockin H K Xu
Journal:  Acta Biomater       Date:  2014-02-27       Impact factor: 8.947

7.  Effects of antibacterial primers with quaternary ammonium and nano-silver on Streptococcus mutans impregnated in human dentin blocks.

Authors:  Lei Cheng; Ke Zhang; Michael D Weir; Huaibing Liu; Xuedong Zhou; Hockin H K Xu
Journal:  Dent Mater       Date:  2013-02-17       Impact factor: 5.304

Review 8.  Marine polysaccharides in pharmaceutical applications: an overview.

Authors:  Paola Laurienzo
Journal:  Mar Drugs       Date:  2010-09-02       Impact factor: 5.118

9.  Time-kill behaviour against eight bacterial species and cytotoxicity of antibacterial monomers.

Authors:  Fang Li; Michael D Weir; Ashraf F Fouad; Hockin H K Xu
Journal:  J Dent       Date:  2013-07-19       Impact factor: 4.379

10.  Chitosan promotes immune responses, ameliorates glutamic oxaloacetic transaminase and glutamic pyruvic transaminase, but enhances lactate dehydrogenase levels in normal mice in vivo.

Authors:  Ming-Yang Yeh; Yung-Luen Shih; Hsueh-Yu Chung; Jason Chou; Hsu-Feng Lu; Chia-Hui Liu; Jia-You Liu; Wen-Wen Huang; Shu-Fen Peng; Lung-Yuan Wu; Jing-Gung Chung
Journal:  Exp Ther Med       Date:  2016-02-09       Impact factor: 2.447

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.