Determination of real-time in-vivo cartilage contact deformation in the ankle joint.

The knowledge of real-time in-vivo cartilage deformation is important for understanding of cartilage function and biomechanical factors that may relate to cartilage degeneration. This study investigated cartilage contact area and peak contact compressive strain of four healthy human ankle joints as a function of time using a combined magnetic resonance (MR) and dual-orthogonal fluoroscopic imaging technique. Each ankle was subjected to a different constant loading (between 700 and 820 N). The cartilage contact deformation was obtained from the first second to 300 s after the load was applied. In all ankle joints studied in this paper, contact strains increased to 24-38% at first 20 s after loading. Beyond 20 s, the change of cartilage contact deformation was relatively small and varied in a rate close to zero beyond 50 s. These data indicated that the cartilage contact areas and contact strain could raise dramatically right after loading and reach a relatively stable condition within 1 min after constant loading. The history of cartilage deformation determined in this study may provide a real-time boundary condition for 3D finite element simulation of in vivo cartilage contact stress in the joint as a function of time.