Literature DB >> 17695615

Color stability and degree of cure of direct composite restoratives after accelerated aging.

Aspasia Sarafianou1, Soultana Iosifidou, Triantafillos Papadopoulos, George Eliades.   

Abstract

PURPOSE: This study evaluated the color changes and amount of remaining C = C bonds (%RDB) in three dental composites after hydrothermal- and photoaging. METHODS AND MATERIALS: The materials tested were Estelite sigma, Filtek Supreme and Tetric Ceram. Specimens were fabricated from each material and subjected to L* a* b* colorimetry and FTIR spectroscopy before and after aging. Statistical evaluation of the deltaL,* deltaa,* deltab,* deltaE and %deltaRDB data was performed by one-way ANOVA and Tukey's test. The %RDB data before and after aging were statistically analyzed using two-way ANOVA and Student-Newman-Keuls test. In all cases an alpha = 0.05 significance level was used.
RESULTS: No statistically significant differences were found in deltaL*, deltaa*, deltaE and %deltaRDB among the materials tested. Tetric Ceram demonstrated a significant difference in deltab*. All the materials showed visually perceptible (deltaE >1) but clinically acceptable values (deltaE < 3.3). Within each material group, statistically significant differences in %RDB were noticed before and after aging (p < 0.05). Filtek Supreme presented the lowest %RDB before aging, with Tetric Ceram presenting the lowest %RDB after aging (p < 0.05). The %deltaRDB mean values were statistically significantly different among all the groups tested. No correlation was found between deltaE and %deltaRDB.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17695615     DOI: 10.2341/06-127

Source DB:  PubMed          Journal:  Oper Dent        ISSN: 0361-7734            Impact factor:   2.440


  20 in total

1.  Spectrophotometric and colorimetric evaluation of staining of the light cured composite after exposure with different intensities of light curing units.

Authors:  Veeramachaneni Chandrasekhar; L Pramod Reddy; T Jaya Prakash; G Anitha Rao; M Pradeep
Journal:  J Conserv Dent       Date:  2011-10

2.  Effects of cold light bleaching on the color stability of composite resins.

Authors:  Liqun Cao; Lijuan Huang; Meisheng Wu; Hua Wei; Shouliang Zhao
Journal:  Int J Clin Exp Med       Date:  2015-06-15

3.  Color changes in staining solutions of four light-cured indirect resin composites.

Authors:  Christina Kentrou; Triantafillos Papadopoulos; Panagiotis Lagouvardos
Journal:  Odontology       Date:  2013-02-16       Impact factor: 2.634

4.  Color stability of nanohybrid resin-based composites, ormocers and compomers.

Authors:  Carmen Llena; Sarai Fernández; Leopoldo Forner
Journal:  Clin Oral Investig       Date:  2016-05-16       Impact factor: 3.573

5.  Color stability of siloranes versus methacrylate-based composites after immersion in staining solutions.

Authors:  Mariana A Arocha; Juan R Mayoral; Dorien Lefever; Montserrat Mercade; Juan Basilio; Miguel Roig
Journal:  Clin Oral Investig       Date:  2012-09-20       Impact factor: 3.573

6.  Effect of water-jet flossing on surface roughness and color stability of dental resin-based composites.

Authors:  Mohammed Alharbi; Ra'fat Farah
Journal:  J Clin Exp Dent       Date:  2020-02-01

7.  Colour stability of veneering composites after accelerated aging.

Authors:  Triantafillos Papadopoulos; Aspasia Sarafianou; Andreas Hatzikyriakos
Journal:  Eur J Dent       Date:  2010-04

8.  Effect of exposure time on the color stability of resin-based restorative materials when polymerized with quartz-tungsten halogen and LED light.

Authors:  Stefan Rüttermann; Kim Suyoun; Wolfgang H-M Raab; Ralf Janda
Journal:  Clin Oral Investig       Date:  2009-07-21       Impact factor: 3.573

9.  Color and opacity of composites protected with surface sealants and submitted to artificial accelerated aging.

Authors:  Fabiano Gamero Aguilar; Lucas da Fonseca Roberti Garcia; Diogo Rodrigues Cruvinel; Ana Beatriz Silva Sousa; Fernanda de Carvalho Panzeri Pires-de-Souza
Journal:  Eur J Dent       Date:  2012-01

10.  Comparison of Mechanical and End-Use Properties of Grey and Dyed Cellulose and Cellulose/Protein Woven Fabrics.

Authors:  Eglė Kumpikaitė; Sandra Varnaitė-Žuravliova; Indrė Tautkutė-Stankuvienė; Ginta Laureckienė
Journal:  Materials (Basel)       Date:  2021-05-26       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.