Literature DB >> 17669463

Combined application of non-discriminated conventional pyrolysis and tetramethylammonium hydroxide-induced thermochemolysis for the characterization of the molecular structure of humic acid isolated from polluted sediments from the Ravenna Lagoon.

Juergen Poerschmann1, Ulf Trommler, Daniele Fabbri, Tadeusz Górecki.   

Abstract

Humic acid (HA) isolated from highly polluted sediment from the Ravenna Lagoon (Italy) was subjected to pyrolysis/tetramethylammonium hydroxide (TMAH)-induced thermochemolysis to reveal the impact of industrial activities on humification. Special effort was made to distinguish between analytes originating from the polymeric humic organic matter network along with sequestered compounds (which cannot be released by solvent extraction), and the solvent-extractable lipid fraction sorbed onto the organic matrix. Exhaustive solvent extraction of the isolated HA proved mandatory to avoid biased results when identifying the origin of the pyrolyzates of untreated samples. Conventional pyrolysis at 750 degrees C of the "degreased" HA revealed a characteristic polycyclic aromatic hydrocarbon (PAH) pattern, which was significantly different than patterns obtained from the pyrolysis of natural humic acids. TMAH-induced thermochemolysis at 500 degrees C provided information on carboxylic acids covalently bound inside the HA network via ester bonds. Thermochemolysis of the "degreased" matrix at 750 degrees C, resulting in the cleavage of C-O and C-C bonds, revealed a significant PAH pattern very similar to that obtained by conventional pyrolysis. The uncommon PAH pattern points to the formation of bound residues as the humification/detoxification pathway. Recalcitrant hopane hydrocarbons showed very similar patterns for both the untreated and exhaustively solvent-extracted samples, which points to hopanes being linked inside the humic network via C-C bonds. The technique of non-discriminating flash pyrolysis used in this study, based on extremely rapid capacitive discharge heating in a Silcosteel capillary, proved to be an excellent method to obtain high-boiling pyrolyzates (PAHs beyond 252Da molecular weight, C(29)-C(31)-hopanes).

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17669463     DOI: 10.1016/j.chemosphere.2007.05.097

Source DB:  PubMed          Journal:  Chemosphere        ISSN: 0045-6535            Impact factor:   7.086


  3 in total

1.  The development of soil organic matter in restored biodiverse Jarrah forests of South-Western Australia as determined by ASE and GCMS.

Authors:  Deborah S Lin; Paul F Greenwood; Suman George; Paul J Somerfield; Mark Tibbett
Journal:  Environ Sci Pollut Res Int       Date:  2011-02-12       Impact factor: 4.223

2.  Retention-time prediction for polycyclic aromatic compounds in reversed-phase capillary electro-chromatography.

Authors:  Peter Feenstra; Heidrun Gruber-Wölfler; Michael Brunsteiner; Johannes Khinast
Journal:  J Mol Model       Date:  2015-04-24       Impact factor: 1.810

3.  Characterization of the lignin signature in Lake Mead, NV, sediment: comparison of on-line flash chemopyrolysis (600 degrees C) and off-line chemolysis (250 degrees C).

Authors:  Spencer M Steinberg; Elkas L Nemr; Mark Rudin
Journal:  Environ Geochem Health       Date:  2008-04-22       Impact factor: 4.609

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.