Literature DB >> 17655477

Comparison of the hemodynamic and thrombogenic performance of two bileaflet mechanical heart valves using a CFD/FSI model.

Kris Dumont1, Jan Vierendeels, Rado Kaminsky, Guido van Nooten, Pascal Verdonck, Danny Bluestein.   

Abstract

The hemodynamic and the thrombogenic performance of two commercially available bileaflet mechanical heart valves (MHVs)--the ATS Open Pivot Valve (ATS) and the St. Jude Regent Valve (SJM), was compared using a state of the art computational fluid dynamics-fluid structure interaction (CFD-FSI) methodology. A transient simulation of the ATS and SJM valves was conducted in a three-dimensional model geometry of a straight conduit with sudden expansion distal the valves, including the valve housing and detailed hinge geometry. An aortic flow waveform (60 beats/min, cardiac output 4 l/min) was applied at the inlet. The FSI formulation utilized a fully implicit coupling procedure using a separate solver for the fluid problem (FLUENT) and for the structural problem. Valve leaflet excursion and pressure differences were calculated, as well as shear stress on the leaflets and accumulated shear stress on particles released during both forward and backward flow phases through the open and closed valve, respectively. In contrast to the SJM, the ATS valve opened to less than maximal opening angle. Nevertheless, maximal and mean pressure gradients and velocity patterns through the valve orifices were comparable. Platelet stress accumulation during forward flow indicated that no platelets experienced a stress accumulation higher than 35 dyne x s/cm2, the threshold for platelet activation (Hellums criterion). However, during the regurgitation flow phase, 0.81% of the platelets in the SJM valve experienced a stress accumulation higher than 35 dyne x s/cm2, compared with 0.63% for the ATS valve. The numerical results indicate that the designs of the ATS and SJM valves, which differ mostly in their hinge mechanism, lead to different potential for platelet activation, especially during the regurgitation phase. This numerical methodology can be used to assess the effects of design parameters on the flow induced thrombogenic potential of blood recirculating devices.

Entities:  

Mesh:

Year:  2007        PMID: 17655477     DOI: 10.1115/1.2746378

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  38 in total

1.  Numerical comparison of the closing dynamics of a new trileaflet and a bileaflet mechanical aortic heart valve.

Authors:  Chi-Pei Li; Po-Chien Lu
Journal:  J Artif Organs       Date:  2012-06-13       Impact factor: 1.731

2.  Flow interactions with cells and tissues: cardiovascular flows and fluid-structure interactions. Sixth International Bio-Fluid Mechanics Symposium and Workshop, March 28-30, 2008, Pasadena, California.

Authors:  Morton H Friedman; Rob Krams; Krishnan B Chandran
Journal:  Ann Biomed Eng       Date:  2010-03       Impact factor: 3.934

3.  Numerical investigation of the effects of channel geometry on platelet activation and blood damage.

Authors:  Jingshu Wu; B Min Yun; Anna M Fallon; Stephen R Hanson; Cyrus K Aidun; Ajit P Yoganathan
Journal:  Ann Biomed Eng       Date:  2010-10-26       Impact factor: 3.934

4.  Mechanical platelet activation potential in abdominal aortic aneurysms.

Authors:  Kirk B Hansen; Amirhossein Arzani; Shawn C Shadden
Journal:  J Biomech Eng       Date:  2015-02-05       Impact factor: 2.097

Review 5.  Review of numerical methods for simulation of mechanical heart valves and the potential for blood clotting.

Authors:  Mohamad Shukri Zakaria; Farzad Ismail; Masaaki Tamagawa; Ahmad Fazli Abdul Aziz; Surjatin Wiriadidjaja; Adi Azrif Basri; Kamarul Arifin Ahmad
Journal:  Med Biol Eng Comput       Date:  2017-07-26       Impact factor: 2.602

6.  The effect of inlet and outlet boundary conditions in image-based CFD modeling of aortic flow.

Authors:  Sudharsan Madhavan; Erica M Cherry Kemmerling
Journal:  Biomed Eng Online       Date:  2018-05-30       Impact factor: 2.819

7.  Ventricular Assist Device Implantation Configurations Impact Overall Mechanical Circulatory Support System Thrombogenic Potential.

Authors:  Wei-Che Chiu; Yared Alemu; Allison J McLarty; Shmuel Einav; Marvin J Slepian; Danny Bluestein
Journal:  ASAIO J       Date:  2017 May/Jun       Impact factor: 2.872

8.  Original article submission: Platelet stress accumulation analysis to predict thrombogenicity of an artificial kidney.

Authors:  Amanda K W Buck; Steven G Goebel; Mark S Goodin; Nathan J Wright; Joseph J Groszek; Jarrett Moyer; Sukhveer Singh; Danny Bluestein; William H Fissell; Shuvo Roy
Journal:  J Biomech       Date:  2018-01-16       Impact factor: 2.712

9.  Platelet activation due to hemodynamic shear stresses: damage accumulation model and comparison to in vitro measurements.

Authors:  Matteo Nobili; Jawaad Sheriff; Umberto Morbiducci; Alberto Redaelli; Danny Bluestein
Journal:  ASAIO J       Date:  2008 Jan-Feb       Impact factor: 2.872

10.  The role of biofluid mechanics in the assessment of clinical and pathological observations: sixth International Bio-Fluid Mechanics Symposium and Workshop, March 28-30, 2008 Pasadena, California.

Authors:  Maria Siebes; Yiannis Ventikos
Journal:  Ann Biomed Eng       Date:  2010-01-20       Impact factor: 3.934

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.