Literature DB >> 17585778

Effect of various process parameters on morphology, rheology, and polygalacturonase production by Aspergillus sojae in a batch bioreactor.

Selale Oncu1, Canan Tari, Sevcan Unluturk.   

Abstract

The effects of pH, agitation speed, and dissolved oxygen tension (DOT), significant in common fungal fermentations, on the production of polygalacturonase (PG) enzyme and their relation to morphology and broth rheology were investigated using Aspergillus sojae in a batch bioreactor. All three factors were effective on the response parameters under study. An uncontrolled pH increased biomass and PG activity by 27% and 38%, respectively, compared to controlled pH (pH 6) with an average pellet size of 1.69 +/- 0.48 mm. pH did not significantly affect the broth rheology but created an impact on the pellet morphology. Similarly, at constant agitation speed the maximum biomass obtained at 500 rpm and at 30 h was 3.27 and 3.67 times more than at 200 and 350 rpm, respectively, with an average pellet size of 1.08 +/- 0.42 mm. The maximum enzyme productivity of 0.149 U mL-1 h-1 was obtained at 200 rpm with an average pellet size of 0.71 +/- 0.35 mm. Non-Newtonian and pseudoplastic broth rheology was observed at 500 rpm agitation speed, broth rheology exhibited dilatant behavior at the lower agitation rate (200 rpm), and at the medium agitation speed (350 rpm) the broth was close to Newtonian. Furthermore, a DOT range of 30-50% was essential for maximum biomass formation, whereas only 10% DOT was required for maximum PG synthesis. Non-Newtonian shear thickening behavior (n > 1.0) was depicted at DOT levels of 10% and 30%, whereas non-Newtonian shear thinning behavior (n < 1.0) was dominant at 50% DOT. The overall fermentation duration (50-70 h) was considerably shorter compared to common fungal fermentations, revealing the economic feasibility of this particular process. As a result this study not only introduced a new strain with a potential of producing a highly commercially significant enzyme but also provided certain parameters significant in the design and mathematical modeling of fungal bioprocesses.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17585778     DOI: 10.1021/bp070079c

Source DB:  PubMed          Journal:  Biotechnol Prog        ISSN: 1520-6033


  3 in total

1.  A molecular key for building hyphae aggregates: the role of the newly identified Streptomyces protein HyaS.

Authors:  Ilona Koebsch; Jens Overbeck; Sophie Piepmeyer; Holger Meschke; Hildgund Schrempf
Journal:  Microb Biotechnol       Date:  2009-02-23       Impact factor: 5.813

2.  Production and Properties of a Thermostable, pH-Stable Exo-Polygalacturonase Using Aureobasidium pullulans Isolated from Saharan Soil of Algeria Grown on Tomato Pomace.

Authors:  Leila Bennamoun; Serge Hiligsmann; Scheherazad Dakhmouche; Amel Ait-Kaki; Fatima-Zohra Kenza Labbani; Tahar Nouadri; Zahia Meraihi; Benedetta Turchetti; Pietro Buzzini; Philippe Thonart
Journal:  Foods       Date:  2016-10-29

Review 3.  Challenges of influencing cellular morphology by morphology engineering techniques and mechanical induced stress on filamentous pellet systems-A critical review.

Authors:  Markus Böl; Kathrin Schrinner; Sebastian Tesche; Rainer Krull
Journal:  Eng Life Sci       Date:  2020-11-05       Impact factor: 2.678

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.