Literature DB >> 17532918

Abrasive finishing and polishing in restorative dentistry: a state-of-the-art review.

Steven R Jefferies1.   

Abstract

Effective finishing and polishing of dental restorations not only result in optimal aesthetics but also provide for acceptable oral health of soft tissues and marginal integrity of the restorative interface. This review of abrasive technology in dentistry provides an overview of basic principles of abrasive science and considers some research concerning clinically relevant questions. The article also discusses some recent innovations in finishing and polishing devices. This review brings forward some newly published, outcome-based information concerning the relevance and importance of an effective knowledge of finishing and polishing techniques and materials. The overall aim is to provide an enhanced awareness and broader knowledge of the principles and tools available to produce optimal surface finishing and integrity in dental restoratives.

Mesh:

Substances:

Year:  2007        PMID: 17532918     DOI: 10.1016/j.cden.2006.12.002

Source DB:  PubMed          Journal:  Dent Clin North Am        ISSN: 0011-8532


  29 in total

1.  Polishing effects and wear performance of chairside CAD/CAM materials.

Authors:  Mike Matzinger; Sebastian Hahnel; Verena Preis; Martin Rosentritt
Journal:  Clin Oral Investig       Date:  2018-05-16       Impact factor: 3.573

2.  Determination of surface roughness and topography of dental resin-based nanocomposites using AFM analysis.

Authors:  Tijana Lainović; Marko Vilotić; Larisa Blažić; Damir Kakaš; Dubravka Marković; Aljoša Ivanišević
Journal:  Bosn J Basic Med Sci       Date:  2013-02       Impact factor: 3.363

3.  Effect of Various Finishing Procedures on the Reflectivity (Shine) of Tooth Enamel - An In-vitro Study.

Authors:  Harshal Ashok Patil; Shrikant Shrinivas Chitko; Veerendra Virupaxappa Kerudi; Amit Ratanlal Maheshwari; Neeraj Suresh Patil; Pawankumar Dnyandeo Tekale; Ketan Ashorao Gore; Amit Ashok Zope
Journal:  J Clin Diagn Res       Date:  2016-08-01

4.  An In vitro Comparative Evaluation of Flexural Strength of Monolithic Zirconia after Surface Alteration Utilising Two Different Techniques.

Authors:  Ketaki Janardhan Chougule; Arti Prabodh Wadkar
Journal:  J Clin Diagn Res       Date:  2017-08-01

5.  Fracture, roughness and phase transformation in CAD/CAM milling and subsequent surface treatments of lithium metasilicate/disilicate glass-ceramics.

Authors:  Abdur-Rasheed Alao; Richard Stoll; Xiao-Fei Song; John R Abbott; Yu Zhang; Jaafar Abduo; Ling Yin
Journal:  J Mech Behav Biomed Mater       Date:  2017-06-15

6.  Effect of different polishing techniques on surface roughness and bacterial adhesion of three glass ionomer-based restorative materials: In vitro study.

Authors:  Hoda S Ismail; Ashraf I Ali; Mohammed A Abo El-Ella; Salah H Mahmoud
Journal:  J Clin Exp Dent       Date:  2020-07-01

7.  Effect of simulated brushing on surface roughness and wear of bis-acryl-based materials submitted to different polishing protocols.

Authors:  Rafael-Francisco-Lia Mondelli; Lorena-de Mello-Alcântara Garrido; Ana-Flávia Soares; Allison-Danitza Rodriguez-Medina; José Mondelli; Fernanda-Sandes de Lucena; Adilson-Yoshio Furuse
Journal:  J Clin Exp Dent       Date:  2022-02-01

8.  Surface roughness of commercial composites after different polishing protocols: an analysis with atomic force microscopy.

Authors:  Luca Giacomelli; Giacomo Derchi; Andrea Frustaci; Bruno Orlando; Orlando Bruno; Ugo Covani; Antonio Barone; Daniele De Santis; Francesco Chiappelli
Journal:  Open Dent J       Date:  2010-09-15

9.  The effect of one-step and multi-step polishing systems on the surface roughness and microhardness of novel resin composites.

Authors:  Ugur Erdemir; Hande Sar Sancakli; Esra Yildiz
Journal:  Eur J Dent       Date:  2012-04

10.  Surface evaluations of a nanocomposite after different finishing and polishing systems for anterior and posterior restorations.

Authors:  Riccardo Monterubbianesi; Vincenzo Tosco; Giulia Orilisi; Simone Grandini; Giovanna Orsini; Angelo Putignano
Journal:  Microsc Res Tech       Date:  2021-06-09       Impact factor: 2.893

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.